Re: [PATCH v7 00/22] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3094 bytes --]

Hey Hal,

On Sat, Apr 01, 2023 at 07:19:12PM +0800, Hal Feng wrote:
> This patch series adds basic clock, reset & DT support for StarFive
> JH7110 SoC.
> 
> @Stephen and @Conor, I have made this series start with the shared
> dt-bindings, so it will be easier to merge.

Thanks. I probably should have asked for that, makes my life easier
that's for sure!

> @Conor, patch 1, 2, 16~21 were already in your branch. Patch 22 is the
> same with the patch [1] I submitted before, which you had accepted but
> not merge it into your branch.

I hadn't merged that into anywhere, so I just went and dropped the
original incarnation of that branch and have re-created it.
I don't recall there being a maintainers pattern error (from running
scripts/get_maintainer.pl --self-test=patterns) with what I had done in
my branch, but with your patch 1 applied I see one. To save myself a
complaint from LKP, I stripped out the MAINTAINERS bits from patch 1
into their own patch that can go with the clock/reset bits.

I squashed 22 into "riscv: dts: starfive: Add initial StarFive JH7110
device tree" since there's no reason to add something knowingly
incorrect IMO.

I've gone and pushed out the following as riscv-jh7110_initial_dts:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator

And the rest as riscv-jh7110_clk_reset:
MAINTAINERS: generalise StarFive clk/reset entries
reset: starfive: Add StarFive JH7110 reset driver
clk: starfive: Add StarFive JH7110 always-on clock driver
clk: starfive: Add StarFive JH7110 system clock driver
reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
reset: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: starfive: Extract the common JH71X0 reset code
reset: starfive: Factor out common JH71X0 reset code
reset: Create subdirectory for StarFive drivers
reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
clk: starfive: Rename "jh7100" to "jh71x0" for the common code
clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
clk: starfive: Factor out common JH7100 and JH7110 code
clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator

<https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/refs>

As it looks like everything has been resolved in terms of comments on
v6, provided LKP doesn't complain or people don't spot something else,
my plan is to send Stephen a PR around Wednesday for the driver bits.

Please LMK if I screwed up anything,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]