Re: [PATCH v2 11/13] arm64: dts: qcom: sdm845-lg-common: Add bootloader-compatible board and MSM IDs

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 9/17/25 3:09 AM, Paul Sajna wrote:
> The original bootloader (fastboot) requires board and MSM IDs in order
> to boot the kernel, so these have been added. When re-using the same
> files to chainload U-Boot, these compatibles are also needed to ensure
> proper booting.
> 
> Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 ++
>  arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts  | 1 +
>  2 files changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> index 1baec758c7d881026bf6001a0a305687d7a14b40..a513cd931b3a984443183ee4e8df7b0e45732630 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
> @@ -5,6 +5,7 @@
>   * Copyright (c) 2022, The Linux Foundation. All rights reserved.
>   */
>  
> +#include <dt-bindings/arm/qcom,ids.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/leds/common.h>
>  #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> @@ -29,6 +30,7 @@
>  
>  / {
>  	chassis-type = "handset";
> +	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
>  
>  	aliases {
>  		serial0 = &uart9;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
> index 8c1692f86e6ceea7b718361965e78f95d39373bb..beb1372dc6c17f5f06c2044412ee1c8165858cd1 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
> @@ -12,6 +12,7 @@
>  / {
>  	model = "LG G7 ThinQ";
>  	compatible = "lg,judyln", "qcom,sdm845";
> +	qcom,board-id = <0x020C0008 0>;

This is almost QCOM_BOARD_ID(MTP, 12, 0), except for the odd BIT(25)
which the dt-binding promises should be left unused..

+Stephan maybe you know more?

Konrad