* [PATCH] arm64: dts: mt8183: Add pwm and backlight node
@ 2020-11-24 4:12 Hsin-Yi Wang
2020-11-25 10:24 ` Enric Balletbo i Serra
0 siblings, 1 reply; 3+ messages in thread
From: Hsin-Yi Wang @ 2020-11-24 4:12 UTC (permalink / raw)
To: linux-kernel
Cc: Rob Herring, Enric Balletbo i Serra, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek
Add pwm to mt8183 and backlight to mt8183-kukui.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 28 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 10 +++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 85f7c33ba4461..bf2ad1294dd30 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -19,6 +19,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ backlight_lcd0: backlight_lcd0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 500000>;
+ power-supply = <&bl_pp5000>;
+ enable-gpios = <&pio 176 0>;
+ brightness-levels = <0 1023>;
+ num-interpolated-steps = <1023>;
+ default-brightness-level = <576>;
+ status = "okay";
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
@@ -536,6 +547,17 @@ pins_clk {
};
};
+ pwm0_pin_default: pwm0_pin_default {
+ pins1 {
+ pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
+ output-high;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>;
+ };
+ };
+
scp_pins: scp {
pins_scp_uart {
pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
@@ -670,6 +692,12 @@ pins_wifi_wakeup {
};
};
+&pwm0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin_default>;
+};
+
&scp {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 08a914d3a6435..a974bad899365 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -479,6 +479,16 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ pwm0: pwm@1100e000 {
+ compatible = "mediatek,mt8183-disp-pwm";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+ #pwm-cells = <2>;
+ clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
+ <&infracfg CLK_INFRA_DISP_PWM>;
+ clock-names = "main", "mm";
+ };
+
i2c3: i2c@1100f000 {
compatible = "mediatek,mt8183-i2c";
reg = <0 0x1100f000 0 0x1000>,
--
2.29.2.454.gaff20da3a2-goog
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: mt8183: Add pwm and backlight node
2020-11-24 4:12 [PATCH] arm64: dts: mt8183: Add pwm and backlight node Hsin-Yi Wang
@ 2020-11-25 10:24 ` Enric Balletbo i Serra
2020-11-27 11:20 ` Matthias Brugger
0 siblings, 1 reply; 3+ messages in thread
From: Enric Balletbo i Serra @ 2020-11-25 10:24 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-kernel
Cc: Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
linux-mediatek
Hi Hsin-Yi,
Thank you for your patch.
On 24/11/20 5:12, Hsin-Yi Wang wrote:
> Add pwm to mt8183 and backlight to mt8183-kukui.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
Picked the patch and checked that pwm for the backlight is working as expected
on my Lenovo Ideapad Duet.
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 28 +++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 10 +++++++
> 2 files changed, 38 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index 85f7c33ba4461..bf2ad1294dd30 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -19,6 +19,17 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + backlight_lcd0: backlight_lcd0 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 500000>;
> + power-supply = <&bl_pp5000>;
> + enable-gpios = <&pio 176 0>;
> + brightness-levels = <0 1023>;
> + num-interpolated-steps = <1023>;
> + default-brightness-level = <576>;
> + status = "okay";
> + };
> +
> memory@40000000 {
> device_type = "memory";
> reg = <0 0x40000000 0 0x80000000>;
> @@ -536,6 +547,17 @@ pins_clk {
> };
> };
>
> + pwm0_pin_default: pwm0_pin_default {
> + pins1 {
> + pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
> + output-high;
> + bias-pull-up;
> + };
> + pins2 {
> + pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>;
> + };
> + };
> +
> scp_pins: scp {
> pins_scp_uart {
> pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
> @@ -670,6 +692,12 @@ pins_wifi_wakeup {
> };
> };
>
> +&pwm0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm0_pin_default>;
> +};
> +
> &scp {
> status = "okay";
> pinctrl-names = "default";
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 08a914d3a6435..a974bad899365 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -479,6 +479,16 @@ spi0: spi@1100a000 {
> status = "disabled";
> };
>
> + pwm0: pwm@1100e000 {
> + compatible = "mediatek,mt8183-disp-pwm";
> + reg = <0 0x1100e000 0 0x1000>;
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
> + #pwm-cells = <2>;
> + clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
> + <&infracfg CLK_INFRA_DISP_PWM>;
> + clock-names = "main", "mm";
> + };
> +
> i2c3: i2c@1100f000 {
> compatible = "mediatek,mt8183-i2c";
> reg = <0 0x1100f000 0 0x1000>,
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: mt8183: Add pwm and backlight node
2020-11-25 10:24 ` Enric Balletbo i Serra
@ 2020-11-27 11:20 ` Matthias Brugger
0 siblings, 0 replies; 3+ messages in thread
From: Matthias Brugger @ 2020-11-27 11:20 UTC (permalink / raw)
To: Enric Balletbo i Serra, Hsin-Yi Wang, linux-kernel
Cc: Rob Herring, devicetree, linux-arm-kernel, linux-mediatek
On 25/11/2020 11:24, Enric Balletbo i Serra wrote:
> Hi Hsin-Yi,
>
> Thank you for your patch.
>
> On 24/11/20 5:12, Hsin-Yi Wang wrote:
>> Add pwm to mt8183 and backlight to mt8183-kukui.
>>
>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
>> ---
>
> Picked the patch and checked that pwm for the backlight is working as expected
> on my Lenovo Ideapad Duet.
>
> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>
Applied to v5.10-next/dts64
Thanks!
>> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 28 +++++++++++++++++++
>> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 10 +++++++
>> 2 files changed, 38 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>> index 85f7c33ba4461..bf2ad1294dd30 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>> @@ -19,6 +19,17 @@ chosen {
>> stdout-path = "serial0:115200n8";
>> };
>>
>> + backlight_lcd0: backlight_lcd0 {
>> + compatible = "pwm-backlight";
>> + pwms = <&pwm0 0 500000>;
>> + power-supply = <&bl_pp5000>;
>> + enable-gpios = <&pio 176 0>;
>> + brightness-levels = <0 1023>;
>> + num-interpolated-steps = <1023>;
>> + default-brightness-level = <576>;
>> + status = "okay";
>> + };
>> +
>> memory@40000000 {
>> device_type = "memory";
>> reg = <0 0x40000000 0 0x80000000>;
>> @@ -536,6 +547,17 @@ pins_clk {
>> };
>> };
>>
>> + pwm0_pin_default: pwm0_pin_default {
>> + pins1 {
>> + pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>> + output-high;
>> + bias-pull-up;
>> + };
>> + pins2 {
>> + pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>;
>> + };
>> + };
>> +
>> scp_pins: scp {
>> pins_scp_uart {
>> pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
>> @@ -670,6 +692,12 @@ pins_wifi_wakeup {
>> };
>> };
>>
>> +&pwm0 {
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pwm0_pin_default>;
>> +};
>> +
>> &scp {
>> status = "okay";
>> pinctrl-names = "default";
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>> index 08a914d3a6435..a974bad899365 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>> @@ -479,6 +479,16 @@ spi0: spi@1100a000 {
>> status = "disabled";
>> };
>>
>> + pwm0: pwm@1100e000 {
>> + compatible = "mediatek,mt8183-disp-pwm";
>> + reg = <0 0x1100e000 0 0x1000>;
>> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
>> + #pwm-cells = <2>;
>> + clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
>> + <&infracfg CLK_INFRA_DISP_PWM>;
>> + clock-names = "main", "mm";
>> + };
>> +
>> i2c3: i2c@1100f000 {
>> compatible = "mediatek,mt8183-i2c";
>> reg = <0 0x1100f000 0 0x1000>,
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-27 11:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-24 4:12 [PATCH] arm64: dts: mt8183: Add pwm and backlight node Hsin-Yi Wang
2020-11-25 10:24 ` Enric Balletbo i Serra
2020-11-27 11:20 ` Matthias Brugger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).