[PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953

[PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953

[Stephan Gerhold]

Convert parts of the qcom,q6v5.txt binding documentation to a DT schema
(together with some DT fixes) in preparation of adding new compatibles
for MSM8909 and MSM8953. The schema can be easily shared between
MSM8916, MSM8974, MSM8909 and MSM8953 because they have almost the same
requirements. The other SoCs are quite different and are likely more
clearly described in separate DT schema(s) to avoid a lot of complicated
if statements.

Since there were some concerns about overlap with the more generic
(but also more complex) DT schema Sireesh made in [1], I've coordinated
with Sireesh for v3 and include his adjusted changes for MSM8953 here.

---
Changes in v4:
  - Address review comments from Krzysztof

Changes in v3:
  - Combine series with Sireesh's for MSM8953

Changes in v2:
  - Address review comments from Krzysztof
  - Drop "ARM: dts: qcom: msm8974: Disable remoteprocs by default"
    since Bjorn applied it already


Sireesh Kodali (1):
  remoteproc: qcom: q6v5-mss: Add modem support on MSM8953

Stephan Gerhold (6):
  arm64: dts: qcom: msm8916: Drop MSS fallback compatible
  dt-bindings: remoteproc: qcom,q6v5: Move MSM8916 to schema
  dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8974
  dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8909
  remoteproc: qcom: q6v5-mss: Add support for MSM8909
  dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8953

 .../remoteproc/qcom,msm8916-mss-pil.yaml      | 289 ++++++++++++++++++
 .../bindings/remoteproc/qcom,q6v5.txt         |  35 ---
 arch/arm64/boot/dts/qcom/msm8916.dtsi         |   2 +-
 drivers/remoteproc/qcom_q6v5_mss.c            | 174 +++++++++--
 4 files changed, 431 insertions(+), 69 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml

-- 
2.30.2

[PATCH v4 1/7] arm64: dts: qcom: msm8916: Drop MSS fallback compatible

[Stephan Gerhold]

MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.

Commit 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.

This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").

Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.

Fixes: 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2: Add Krzysztof's Reviewed-by
---
This fixes the following dtbs_check warning after the DT schema
conversion:

remoteproc@4080000: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,msm8916-mss-pil', 'qcom,q6v5-pil'] is too long, or
        'qcom,q6v5-pil' was expected
        From schema: remoteproc/qcom,msm8916-mss-pil.yaml
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index de741f287e1d..147c6aa3f046 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1345,7 +1345,7 @@ bam_dmux_dma: dma-controller@4044000 {
 		};
 
 		mpss: remoteproc@4080000 {
-			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
 
-- 
2.30.2

[PATCH v4 2/7] dt-bindings: remoteproc: qcom,q6v5: Move MSM8916 to schema

[Stephan Gerhold]

qcom,q6v5.txt covers multiple SoCs with quite different binding
requirements. Converting this into one DT schema would require
several if statements, making the DT schema overall harder to
read and understand.

To avoid this, follow the example of SC7180/SC7280 and split
"qcom,msm8916-mss-pil" (and the equivalent deprecated "qcom,q6v5-pil"
compatible) into a separate DT schema. The schema is somewhat based
on the one for SC7180/SC7280 but adjusted for the old platforms.

Compared to the old plain text bindings, add missing documentation for
the "bam-dmux" subnode and recommend one particular approach to specify
the MBA/MPSS "memory-region" (the other one is marked as deprecated).

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
"dt-bindings: remoteproc: qcom,smd-edge: Add APR/FastRPC" [1] should be
applied additionally to avoid a dtbs_check warning related to fastrpc in
msm8916.dtsi.

Changes in v4: Add "unevaluatedProperties: false" to smd-edge
Changes in v3: None
Changes in v2:
  - Add blank lines between top-level properties
  - Drop "deprecated" in "oneOf" list, it is not clear if this is valid
    and it should be redundant since the properties itself are already
    marked as "deprecated"

[1]: https://lore.kernel.org/linux-arm-msm/20220908181432.458900-1-stephan.gerhold@kernkonzept.com/
---
 .../remoteproc/qcom,msm8916-mss-pil.yaml      | 247 ++++++++++++++++++
 .../bindings/remoteproc/qcom,q6v5.txt         |  19 --
 2 files changed, 247 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
new file mode 100644
index 000000000000..ce95e025b54a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,msm8916-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 MSS Peripheral Image Loader (and similar)
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  This document describes the hardware for a component that loads and boots
+  firmware on the Qualcomm MSM8916 Modem Hexagon Core (and similar).
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8916-mss-pil
+
+      - const: qcom,q6v5-pil
+        description: Deprecated, prefer using qcom,msm8916-mss-pil
+        deprecated: true
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: Configuration interface (AXI) clock
+      - description: Configuration bus (AHB) clock
+      - description: Boot ROM (AHB) clock
+      - description: XO proxy clock (control handed over after startup)
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: mem
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX proxy power domain (control handed over after startup)
+      - description: MX proxy power domain (control handed over after startup)
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+
+  pll-supply:
+    description: PLL proxy supply (control handed over after startup)
+
+  resets:
+    items:
+      - description: MSS restart control
+
+  reset-names:
+    items:
+      - const: mss_restart
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop modem
+
+  qcom,smem-state-names:
+    description: Names of the states used by the AP to signal the Hexagon core
+    items:
+      - const: stop
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: MPSS reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  bam-dmux:
+    $ref: /schemas/net/qcom,bam-dmux.yaml#
+    description:
+      Qualcomm BAM Data Multiplexer (provides network interface to the modem)
+
+  smd-edge:
+    $ref: qcom,smd-edge.yaml#
+    description:
+      Qualcomm SMD subnode which represents communication edge, channels
+      and devices related to the DSP.
+    properties:
+      label:
+        enum:
+          - modem
+          - hexagon
+    unevaluatedProperties: false
+
+  # Deprecated properties
+  cx-supply:
+    description: CX power domain regulator supply (prefer using power-domains)
+    deprecated: true
+
+  mx-supply:
+    description: MX power domain regulator supply (prefer using power-domains)
+    deprecated: true
+
+  mba:
+    type: object
+    description:
+      MBA reserved region (prefer using memory-region with two items)
+    properties:
+      memory-region: true
+    required:
+      - memory-region
+    deprecated: true
+
+  mpss:
+    type: object
+    description:
+      MPSS reserved region (prefer using memory-region with two items)
+    properties:
+      memory-region: true
+    required:
+      - memory-region
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - pll-supply
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - smd-edge
+
+allOf:
+  # Fallbacks for deprecated properties
+  - oneOf:
+      - required:
+          - memory-region
+      - required:
+          - mba
+          - mpss
+  - oneOf:
+      - required:
+          - power-domains
+          - power-domain-names
+      - required:
+          - cx-supply
+          - mx-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,msm8916-mss-pil";
+        reg = <0x04080000 0x100>, <0x04020000 0x40>;
+        reg-names = "qdsp6", "rmb";
+
+        interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+        qcom,smem-states = <&hexagon_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+        qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+                 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+                 <&xo_board>;
+        clock-names = "iface", "bus", "mem", "xo";
+
+        power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>;
+        power-domain-names = "cx", "mx";
+        pll-supply = <&pm8916_l7>;
+
+        resets = <&scm 0>;
+        reset-names = "mss_restart";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        smd-edge {
+            interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,smd-edge = <0>;
+            qcom,ipc = <&apcs 8 12>;
+            qcom,remote-pid = <1>;
+
+            label = "hexagon";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index d0ebd16ee0e1..11862b6c2339 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -7,10 +7,8 @@ on the Qualcomm Hexagon core.
 	Usage: required
 	Value type: <string>
 	Definition: must be one of:
-		    "qcom,q6v5-pil",
 		    "qcom,ipq8074-wcss-pil"
 		    "qcom,qcs404-wcss-pil"
-		    "qcom,msm8916-mss-pil",
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
@@ -37,10 +35,8 @@ on the Qualcomm Hexagon core.
 	Value type: <stringlist>
 	Definition: The interrupts needed depends on the compatible
 		    string:
-	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
 	qcom,qcs404-wcss-pil:
-	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
@@ -72,8 +68,6 @@ on the Qualcomm Hexagon core.
 		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
 		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
 		    "lcc_axim_cbc", "lcc_bcr_sleep"
-	qcom,q6v5-pil:
-	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 		    must be "iface", "bus", "mem", "xo"
 	qcom,msm8996-mss-pil:
@@ -112,17 +106,6 @@ should be referenced as follows:
 	Definition: reference to the reserved-memory for the mba region followed
 		    by the mpss region
 
-For the compatible strings below the following supplies are required:
-  "qcom,q6v5-pil"
-  "qcom,msm8916-mss-pil",
-- cx-supply: (deprecated, use power domain instead)
-- mx-supply: (deprecated, use power domain instead)
-- pll-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the regulators to be held on behalf of the
-		    booting of the Hexagon core
-
 For the compatible string below the following supplies are required:
   "qcom,msm8974-mss-pil"
 - cx-supply: (deprecated, use power domain instead)
@@ -161,8 +144,6 @@ For the compatible string below the following supplies are required:
 	Definition: The power-domains needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
 		    no power-domain names required
-	qcom,q6v5-pil:
-	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
-- 
2.30.2

[PATCH v4 3/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8974

[Stephan Gerhold]

The "qcom,msm8974-mss-pil" binding is still similar enough to MSM8916
to be covered by the same DT schema. The only difference is the
additional "mss-supply", which can be easily handled using a single
if statement.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v4: Drop obvious comment, add Krzysztof's Reviewed-by
Changes in v3: None
Changes in v2:
  - Add if to the "allOf" list (suggested by Krzysztof)
---
 .../remoteproc/qcom,msm8916-mss-pil.yaml         | 15 +++++++++++++++
 .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 16 ----------------
 2 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
index ce95e025b54a..d7d05f9ec8ae 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
@@ -18,6 +18,7 @@ properties:
     oneOf:
       - enum:
           - qcom,msm8916-mss-pil
+          - qcom,msm8974-mss-pil
 
       - const: qcom,q6v5-pil
         description: Deprecated, prefer using qcom,msm8916-mss-pil
@@ -76,6 +77,9 @@ properties:
   pll-supply:
     description: PLL proxy supply (control handed over after startup)
 
+  mss-supply:
+    description: MSS power domain supply (only valid for qcom,msm8974-mss-pil)
+
   resets:
     items:
       - description: MSS restart control
@@ -181,6 +185,17 @@ required:
   - smd-edge
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8974-mss-pil
+    then:
+      required:
+        - mss-supply
+    else:
+      properties:
+        mss-supply: false
+
   # Fallbacks for deprecated properties
   - oneOf:
       - required:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 11862b6c2339..5923c0447e2d 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -9,7 +9,6 @@ on the Qualcomm Hexagon core.
 	Definition: must be one of:
 		    "qcom,ipq8074-wcss-pil"
 		    "qcom,qcs404-wcss-pil"
-		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
 		    "qcom,sdm845-mss-pil"
@@ -37,7 +36,6 @@ on the Qualcomm Hexagon core.
 		    string:
 	qcom,ipq8074-wcss-pil:
 	qcom,qcs404-wcss-pil:
-	qcom,msm8974-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
@@ -68,8 +66,6 @@ on the Qualcomm Hexagon core.
 		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
 		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
 		    "lcc_axim_cbc", "lcc_bcr_sleep"
-	qcom,msm8974-mss-pil:
-		    must be "iface", "bus", "mem", "xo"
 	qcom,msm8996-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "pnoc", "qdss"
@@ -106,17 +102,6 @@ should be referenced as follows:
 	Definition: reference to the reserved-memory for the mba region followed
 		    by the mpss region
 
-For the compatible string below the following supplies are required:
-  "qcom,msm8974-mss-pil"
-- cx-supply: (deprecated, use power domain instead)
-- mss-supply:
-- mx-supply: (deprecated, use power domain instead)
-- pll-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the regulators to be held on behalf of the
-		    booting of the Hexagon core
-
 For the compatible string below the following supplies are required:
   "qcom,qcs404-wcss-pil"
 - cx-supply:
@@ -144,7 +129,6 @@ For the compatible string below the following supplies are required:
 	Definition: The power-domains needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
 		    no power-domain names required
-	qcom,msm8974-mss-pil:
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
-- 
2.30.2

[PATCH v4 4/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8909

[Stephan Gerhold]

Document the "qcom,msm8909-mss-pil" compatible for the modem remote
processor on MSM8909. It is used pretty much exactly like the existing
one for MSM8916.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
  - Fix typo in commit subject (qcom,q6v5-pil -> qcom,msm8916-mss-pil)
  - Add Krzysztof's Acked-by
---
 .../devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
index d7d05f9ec8ae..250bf4afab10 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - qcom,msm8909-mss-pil
           - qcom,msm8916-mss-pil
           - qcom,msm8974-mss-pil
 
-- 
2.30.2

[PATCH v4 5/7] remoteproc: qcom: q6v5-mss: Add support for MSM8909

[Stephan Gerhold]

Port the initialization sequence necessary for booting the modem remote
processor on the MSM8909 SoC from Qualcomm's msm-3.10 release [1].
The sequence is actually similar to the existing one for MSM8996 and
MSM8998 except that there is no separate QDSP6SS_MEM_PWR_CTL register
and most of the "memories" are enabled at once instead of sequentially.

To reuse the existing code just insert some if statements where needed
and add a configuration similar to the one from MSM8916.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/commit/56dcedc8dac8abff6b007f76a29430b2d0a44704

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
Changes in v4: Make subject consistent with PATCH 7/7
Changes in v3: None
Changes in v2: None
---
 drivers/remoteproc/qcom_q6v5_mss.c | 123 +++++++++++++++++++++--------
 1 file changed, 90 insertions(+), 33 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index fddb63cffee0..2555f06dfc74 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -111,6 +111,9 @@
 #define QDSS_BHS_ON			BIT(21)
 #define QDSS_LDO_BYP			BIT(22)
 
+/* QDSP6v55 parameters */
+#define QDSP6V55_MEM_BITS		GENMASK(16, 8)
+
 /* QDSP6v56 parameters */
 #define QDSP6v56_LDO_BYP		BIT(25)
 #define QDSP6v56_BHS_ON		BIT(24)
@@ -234,6 +237,7 @@ struct q6v5 {
 };
 
 enum {
+	MSS_MSM8909,
 	MSS_MSM8916,
 	MSS_MSM8974,
 	MSS_MSM8996,
@@ -687,13 +691,14 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 			return ret;
 		}
 		goto pbl_wait;
-	} else if (qproc->version == MSS_MSM8996 ||
+	} else if (qproc->version == MSS_MSM8909 ||
+		   qproc->version == MSS_MSM8996 ||
 		   qproc->version == MSS_MSM8998) {
-		int mem_pwr_ctl;
 
-		/* Override the ACC value if required */
-		writel(QDSP6SS_ACC_OVERRIDE_VAL,
-		       qproc->reg_base + QDSP6SS_STRAP_ACC);
+		if (qproc->version != MSS_MSM8909)
+			/* Override the ACC value if required */
+			writel(QDSP6SS_ACC_OVERRIDE_VAL,
+			       qproc->reg_base + QDSP6SS_STRAP_ACC);
 
 		/* Assert resets, stop core */
 		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
@@ -725,36 +730,53 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		val |= QDSP6v56_LDO_BYP;
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 
-		/* Deassert QDSP6 compiler memory clamp */
-		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-		val &= ~QDSP6v56_CLAMP_QMC_MEM;
-		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-
-		/* Deassert memory peripheral sleep and L2 memory standby */
-		val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
-		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-
-		/* Turn on L1, L2, ETB and JU memories 1 at a time */
-		if (qproc->version == MSS_MSM8996) {
-			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
-			i = 19;
+		if (qproc->version != MSS_MSM8909) {
+			int mem_pwr_ctl;
+
+			/* Deassert QDSP6 compiler memory clamp */
+			val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+			val &= ~QDSP6v56_CLAMP_QMC_MEM;
+			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+			/* Deassert memory peripheral sleep and L2 memory standby */
+			val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
+			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+			/* Turn on L1, L2, ETB and JU memories 1 at a time */
+			if (qproc->version == MSS_MSM8996) {
+				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
+				i = 19;
+			} else {
+				/* MSS_MSM8998 */
+				mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
+				i = 28;
+			}
+			val = readl(qproc->reg_base + mem_pwr_ctl);
+			for (; i >= 0; i--) {
+				val |= BIT(i);
+				writel(val, qproc->reg_base + mem_pwr_ctl);
+				/*
+				 * Read back value to ensure the write is done then
+				 * wait for 1us for both memory peripheral and data
+				 * array to turn on.
+				 */
+				val |= readl(qproc->reg_base + mem_pwr_ctl);
+				udelay(1);
+			}
 		} else {
-			/* MSS_MSM8998 */
-			mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
-			i = 28;
-		}
-		val = readl(qproc->reg_base + mem_pwr_ctl);
-		for (; i >= 0; i--) {
-			val |= BIT(i);
-			writel(val, qproc->reg_base + mem_pwr_ctl);
-			/*
-			 * Read back value to ensure the write is done then
-			 * wait for 1us for both memory peripheral and data
-			 * array to turn on.
-			 */
-			val |= readl(qproc->reg_base + mem_pwr_ctl);
-			udelay(1);
+			/* Turn on memories */
+			val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+			val |= Q6SS_SLP_RET_N | Q6SS_L2DATA_STBY_N |
+			       Q6SS_ETB_SLP_NRET_N | QDSP6V55_MEM_BITS;
+			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+			/* Turn on L2 banks 1 at a time */
+			for (i = 0; i <= 7; i++) {
+				val |= BIT(i);
+				writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+			}
 		}
+
 		/* Remove word line clamp */
 		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 		val &= ~QDSP6v56_CLAMP_WL;
@@ -2240,6 +2262,40 @@ static const struct rproc_hexagon_res msm8996_mss = {
 	.version = MSS_MSM8996,
 };
 
+static const struct rproc_hexagon_res msm8909_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_clk_names = (char*[]){
+		"xo",
+		NULL
+	},
+	.active_clk_names = (char*[]){
+		"iface",
+		"bus",
+		"mem",
+		NULL
+	},
+	.proxy_pd_names = (char*[]){
+		"mx",
+		"cx",
+		NULL
+	},
+	.need_mem_protection = false,
+	.has_alt_reset = false,
+	.has_mba_logs = false,
+	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
+	.version = MSS_MSM8909,
+};
+
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -2340,6 +2396,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
 
 static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
+	{ .compatible = "qcom,msm8909-mss-pil", .data = &msm8909_mss},
 	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
 	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
-- 
2.30.2

[PATCH v4 6/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8953

[Stephan Gerhold]

Add the compatible for MSS as found on the MSM8953 platform.

The situation is similar to the existing bindings for MSM8974: there is
an additional "mss" power domain that must be voted for while starting
up the remote processor. The difference is that on MSM8974 the power
domain is represented as a regulator (firmware expects specific voltage)
while on MSM8953 it is represented as power domain (firmware expects
performance state instead of voltage).

Handle this difference by adding the "mss" power domain as optional
third item, and then restrict it (and make it required) only when using
the MSM8953 compatible.

Co-developed-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v4: Drop obvious comment, add Krzysztof's Reviewed-by
Changes in v3: Combine series with Sireesh's patches for MSM8953
---
 .../remoteproc/qcom,msm8916-mss-pil.yaml      | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
index 250bf4afab10..6e6e69ad9cd7 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,msm8909-mss-pil
           - qcom,msm8916-mss-pil
+          - qcom,msm8953-mss-pil
           - qcom,msm8974-mss-pil
 
       - const: qcom,q6v5-pil
@@ -69,11 +70,16 @@ properties:
     items:
       - description: CX proxy power domain (control handed over after startup)
       - description: MX proxy power domain (control handed over after startup)
+      - description: MSS proxy power domain (control handed over after startup)
+                     (only valid for qcom,msm8953-mss-pil)
+    minItems: 2
 
   power-domain-names:
     items:
       - const: cx
       - const: mx
+      - const: mss # only valid for qcom,msm8953-mss-pil
+    minItems: 2
 
   pll-supply:
     description: PLL proxy supply (control handed over after startup)
@@ -186,6 +192,26 @@ required:
   - smd-edge
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8953-mss-pil
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+      required:
+        - power-domains
+        - power-domain-names
+    else:
+      properties:
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+
   - if:
       properties:
         compatible:
-- 
2.30.2

[PATCH v4 7/7] remoteproc: qcom: q6v5-mss: Add modem support on MSM8953

[Stephan Gerhold]

From: Sireesh Kodali <sireeshkodali1@gmail.com>

The modem on the MSM8953 platform is similar to the modem on the MSM8996
platform in terms of set up. It differs primarily in that TZ needs to be
informed of the modem start address and pas_id.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
Changes in v4: None
Changes in v3: Combine series with Sireesh's patches for MSM8953
---
 drivers/remoteproc/qcom_q6v5_mss.c | 55 ++++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 2555f06dfc74..2f4027664a0e 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -40,6 +40,8 @@
 
 #define MBA_LOG_SIZE			SZ_4K
 
+#define MPSS_PAS_ID			5
+
 /* RMB Status Register Values */
 #define RMB_PBL_SUCCESS			0x1
 
@@ -239,6 +241,7 @@ struct q6v5 {
 enum {
 	MSS_MSM8909,
 	MSS_MSM8916,
+	MSS_MSM8953,
 	MSS_MSM8974,
 	MSS_MSM8996,
 	MSS_MSM8998,
@@ -692,10 +695,12 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		}
 		goto pbl_wait;
 	} else if (qproc->version == MSS_MSM8909 ||
+		   qproc->version == MSS_MSM8953 ||
 		   qproc->version == MSS_MSM8996 ||
 		   qproc->version == MSS_MSM8998) {
 
-		if (qproc->version != MSS_MSM8909)
+		if (qproc->version != MSS_MSM8909 &&
+		    qproc->version != MSS_MSM8953)
 			/* Override the ACC value if required */
 			writel(QDSP6SS_ACC_OVERRIDE_VAL,
 			       qproc->reg_base + QDSP6SS_STRAP_ACC);
@@ -743,7 +748,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 			writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 
 			/* Turn on L1, L2, ETB and JU memories 1 at a time */
-			if (qproc->version == MSS_MSM8996) {
+			if (qproc->version == MSS_MSM8953 ||
+			    qproc->version == MSS_MSM8996) {
 				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
 				i = 19;
 			} else {
@@ -1365,6 +1371,15 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
 	}
 
+	if (qproc->version == MSS_MSM8953) {
+		ret = qcom_scm_pas_mem_setup(MPSS_PAS_ID, qproc->mpss_phys, qproc->mpss_size);
+		if (ret) {
+			dev_err(qproc->dev,
+				"setting up mpss memory failed: %d\n", ret);
+			goto release_firmware;
+		}
+	}
+
 	/*
 	 * In case of a modem subsystem restart on secure devices, the modem
 	 * memory can be reclaimed only after MBA is loaded.
@@ -2341,6 +2356,41 @@ static const struct rproc_hexagon_res msm8916_mss = {
 	.version = MSS_MSM8916,
 };
 
+static const struct rproc_hexagon_res msm8953_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_clk_names = (char*[]){
+		"xo",
+		NULL
+	},
+	.active_clk_names = (char*[]){
+		"iface",
+		"bus",
+		"mem",
+		NULL
+	},
+	.proxy_pd_names = (char*[]) {
+		"cx",
+		"mx",
+		"mss",
+		NULL
+	},
+	.need_mem_protection = false,
+	.has_alt_reset = false,
+	.has_mba_logs = false,
+	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
+	.version = MSS_MSM8953,
+};
+
 static const struct rproc_hexagon_res msm8974_mss = {
 	.hexagon_mba_image = "mba.b00",
 	.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -2398,6 +2448,7 @@ static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8909-mss-pil", .data = &msm8909_mss},
 	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
+	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
 	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
 	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
-- 
2.30.2

Re: [PATCH v4 2/7] dt-bindings: remoteproc: qcom,q6v5: Move MSM8916 to schema

[Krzysztof Kozlowski]

On 08/09/2022 20:24, Stephan Gerhold wrote:
> qcom,q6v5.txt covers multiple SoCs with quite different binding
> requirements. Converting this into one DT schema would require
> several if statements, making the DT schema overall harder to
> read and understand.
> 
> To avoid this, follow the example of SC7180/SC7280 and split
> "qcom,msm8916-mss-pil" (and the equivalent deprecated "qcom,q6v5-pil"
> compatible) into a separate DT schema. The schema is somewhat based
> on the one for SC7180/SC7280 but adjusted for the old platforms.
> 
> Compared to the old plain text bindings, add missing documentation for
> the "bam-dmux" subnode and recommend one particular approach to specify
> the MBA/MPSS "memory-region" (the other one is marked as deprecated).
> 
> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
> ---
> "dt-bindings: remoteproc: qcom,smd-edge: Add APR/FastRPC" [1] should be
> applied additionally to avoid a dtbs_check warning related to fastrpc in
> msm8916.dtsi.
> 
> Changes in v4: Add "unevaluatedProperties: false" to smd-edge
> Changes in v3: None
> Changes in v2:
>   - Add blank lines between top-level properties
>   - Drop "deprecated" in "oneOf" list, it is not clear if this is valid
>     and it should be redundant since the properties itself are already
>     marked as "deprecated"
> 
> [1]: https://lore.kernel.org/linux-arm-msm/20220908181432.458900-1-stephan.gerhold@kernkonzept.com/


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: (subset) [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953

[Bjorn Andersson]

On Thu, 8 Sep 2022 20:24:26 +0200, Stephan Gerhold wrote:
> Convert parts of the qcom,q6v5.txt binding documentation to a DT schema
> (together with some DT fixes) in preparation of adding new compatibles
> for MSM8909 and MSM8953. The schema can be easily shared between
> MSM8916, MSM8974, MSM8909 and MSM8953 because they have almost the same
> requirements. The other SoCs are quite different and are likely more
> clearly described in separate DT schema(s) to avoid a lot of complicated
> if statements.
> 
> [...]

Applied, thanks!

[1/7] arm64: dts: qcom: msm8916: Drop MSS fallback compatible
      commit: ff02ac621634e82c0c34d02a79d402ae700cdfd0

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953

[Bjorn Andersson]

On Thu, 8 Sep 2022 20:24:26 +0200, Stephan Gerhold wrote:
> Convert parts of the qcom,q6v5.txt binding documentation to a DT schema
> (together with some DT fixes) in preparation of adding new compatibles
> for MSM8909 and MSM8953. The schema can be easily shared between
> MSM8916, MSM8974, MSM8909 and MSM8953 because they have almost the same
> requirements. The other SoCs are quite different and are likely more
> clearly described in separate DT schema(s) to avoid a lot of complicated
> if statements.
> 
> [...]

Applied, thanks!

[2/7] dt-bindings: remoteproc: qcom,q6v5: Move MSM8916 to schema
      commit: b9880532d0cdf54dc6cc0e028afe47d829873b20
[3/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8974
      commit: ac686cbc6f8bb7810058955e3bb5b5635ca9331a
[4/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8909
      commit: f8fb0b3d453e8a0a3b94c18001ce8f1e86d95036
[5/7] remoteproc: qcom: q6v5-mss: Add support for MSM8909
      commit: ed71c47f0000ec17b4ce167bce0d44dff8e144e1
[6/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8953
      commit: 43baa1a2215998ecb2ba64bb6d435d07541c7184
[7/7] remoteproc: qcom: q6v5-mss: Add modem support on MSM8953
      commit: 0201f759594b1248635185a92a5e39f47441ad6a

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>