From: Stanimir Varbanov <svarbanov@mm-sol.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Jingoo Han <jingoohan1@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v7 0/7] PCI: qcom: Fix higher MSI vectors handling
Date: Thu, 5 May 2022 18:37:48 +0300 [thread overview]
Message-ID: <ace7dd07-cf2f-fa74-866f-50f7da0b89bb@mm-sol.com> (raw)
In-Reply-To: <20220505135407.1352382-1-dmitry.baryshkov@linaro.org>
Thanks Dmitry!
On 5/5/22 16:54, Dmitry Baryshkov wrote:
> I have replied with my Tested-by to the patch at [2], which has landed
> in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom:
> Add support for handling MSIs from 8 endpoints"). However lately I
> noticed that during the tests I still had 'pcie_pme=nomsi', so the
> device was not forced to use higher MSI vectors.
>
> After removing this option I noticed that hight MSI vectors are not
> delivered on tested platforms. After additional research I stumbled upon
> a patch in msm-4.14 ([1]), which describes that each group of MSI
> vectors is mapped to the separate interrupt. Implement corresponding
> mapping.
>
> Since we can not expect that other platforms will use multi-IRQ scheme
> for MSI mapping (e.g. iMX and Tegra map all 256 MSI interrupts to single
> IRQ), it's support is implemented directly in pcie-qcom rather than in
> the core driver.
>
> The first patch in the series is a revert of [2] (landed in pci-next).
> Either both patches should be applied or both should be dropped.
>
> Patchseries dependecies: [3] (for the schema change).
>
> Changes since v6:
> - Fix indentation of the arguments as requested by Stanimir
<cut>
>
> Dmitry Baryshkov (7):
> PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8
> endpoints"
> PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
> PCI: dwc: Add msi_host_deinit callback
> PCI: dwc: Export several functions useful for MSI implentations
> PCI: qcom: Handle MSIs routed to multiple GIC interrupts
> dt-bindings: PCI: qcom: Support additional MSI interrupts
> arm64: dts: qcom: sm8250: provide additional MSI interrupts
For PCI qcom driver:
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
>
> .../devicetree/bindings/pci/qcom,pcie.yaml | 45 +++++-
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 +-
> .../pci/controller/dwc/pcie-designware-host.c | 72 +++++----
> drivers/pci/controller/dwc/pcie-designware.h | 12 ++
> drivers/pci/controller/dwc/pcie-qcom.c | 138 +++++++++++++++++-
> 5 files changed, 246 insertions(+), 32 deletions(-)
>
--
regards,
Stan
prev parent reply other threads:[~2022-05-05 15:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-05 13:54 [PATCH v7 0/7] PCI: qcom: Fix higher MSI vectors handling Dmitry Baryshkov
2022-05-05 13:54 ` [PATCH v7 1/7] PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8 endpoints" Dmitry Baryshkov
2022-05-05 20:12 ` Rob Herring
2022-05-05 13:54 ` [PATCH v7 2/7] PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi() Dmitry Baryshkov
2022-05-05 20:11 ` Rob Herring
2022-05-05 13:54 ` [PATCH v7 3/7] PCI: dwc: Add msi_host_deinit callback Dmitry Baryshkov
2022-05-05 13:54 ` [PATCH v7 4/7] PCI: dwc: Export several functions useful for MSI implentations Dmitry Baryshkov
2022-05-05 13:54 ` [PATCH v7 5/7] PCI: qcom: Handle MSIs routed to multiple GIC interrupts Dmitry Baryshkov
2022-05-05 21:26 ` Rob Herring
2022-05-06 7:40 ` Dmitry Baryshkov
2022-05-09 21:00 ` Rob Herring
2022-05-05 13:54 ` [PATCH v7 6/7] dt-bindings: PCI: qcom: Support additional MSI interrupts Dmitry Baryshkov
2022-05-05 21:30 ` Rob Herring
2022-05-11 14:50 ` Dmitry Baryshkov
2022-05-05 13:54 ` [PATCH v7 7/7] arm64: dts: qcom: sm8250: provide " Dmitry Baryshkov
2022-05-05 15:37 ` Stanimir Varbanov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ace7dd07-cf2f-fa74-866f-50f7da0b89bb@mm-sol.com \
--to=svarbanov@mm-sol.com \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).