From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
Peter Rosin <peda@axentia.se>, Linus Walleij <linusw@kernel.org>
Cc: kernel@pengutronix.de, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-gpio@vger.kernel.org, David Jander <david@protonic.nl>
Subject: Re: [PATCH v7 0/6] mfd: Add support for NXP MC33978/MC34978 MSDI
Date: Sun, 29 Mar 2026 07:56:19 +0200 [thread overview]
Message-ID: <aci_A1ye2N3g0IIQ@pengutronix.de> (raw)
In-Reply-To: <20260327163450.3287313-1-o.rempel@pengutronix.de>
Hi all,
There are some valid review points related to the MFD core:
https://sashiko.dev/#/patchset/20260327163450.3287313-1-o.rempel%40pengutronix.de
i'll send a new version.
On Fri, Mar 27, 2026 at 05:34:44PM +0100, Oleksij Rempel wrote:
> changes v7:
> - drop gpiolib irq fix and make pinctrl more robust against NULL point
> dereference.
>
> This series adds support for the NXP MC33978/MC34978 Multiple Switch Detection
> Interface (MSDI) via the MFD framework.
>
> Architecture overview:
> * mfd: Core driver handling 2-frame pipelined SPI, regulator sequencing, and
> linear irq_domain. Harvests status bits from SPI MISO MSB.
> * pinctrl: Exposes 22 physical switch inputs as standard GPIOs. Proxies IRQs to
> the MFD domain.
> * hwmon: Exposes thermal limits, VBATP/VDDQ voltage boundaries, and dynamic
> fault alarms.
> * mux: Controls the 24-to-1 AMUX routing analog signals (switch voltages,
> temperature, VBATP) to an external ADC.
>
> Initial pinctrl implementation by David Jander, reworked into this MFD
> architecture.
>
> Best regards,
> Oleksij
>
> David Jander (1):
> pinctrl: add NXP MC33978/MC34978 pinctrl driver
>
> Oleksij Rempel (5):
> dt-bindings: pinctrl: add NXP MC33978/MC34978 MSDI
> mfd: add NXP MC33978/MC34978 core driver
> pinctrl: core: Make pin group callbacks optional for pin-only drivers
> hwmon: add NXP MC33978/MC34978 driver
> mux: add NXP MC33978/MC34978 AMUX driver
>
> .../bindings/pinctrl/nxp,mc33978.yaml | 153 +++
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/mc33978-hwmon.c | 548 ++++++++++
> drivers/mfd/Kconfig | 15 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/mc33978.c | 933 ++++++++++++++++++
> drivers/mux/Kconfig | 14 +
> drivers/mux/Makefile | 2 +
> drivers/mux/mc33978-mux.c | 136 +++
> drivers/pinctrl/Kconfig | 14 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/core.c | 41 +-
> drivers/pinctrl/pinconf.c | 9 +-
> drivers/pinctrl/pinctrl-mc33978.c | 836 ++++++++++++++++
> include/linux/mfd/mc33978.h | 92 ++
> 16 files changed, 2800 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,mc33978.yaml
> create mode 100644 drivers/hwmon/mc33978-hwmon.c
> create mode 100644 drivers/mfd/mc33978.c
> create mode 100644 drivers/mux/mc33978-mux.c
> create mode 100644 drivers/pinctrl/pinctrl-mc33978.c
> create mode 100644 include/linux/mfd/mc33978.h
>
> --
> 2.47.3
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2026-03-29 5:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-27 16:34 [PATCH v7 0/6] mfd: Add support for NXP MC33978/MC34978 MSDI Oleksij Rempel
2026-03-27 16:34 ` [PATCH v7 1/6] dt-bindings: pinctrl: add " Oleksij Rempel
2026-03-27 17:36 ` Rob Herring (Arm)
2026-03-27 16:34 ` [PATCH v7 2/6] mfd: add NXP MC33978/MC34978 core driver Oleksij Rempel
2026-03-27 16:34 ` [PATCH v7 3/6] pinctrl: core: Make pin group callbacks optional for pin-only drivers Oleksij Rempel
2026-03-27 16:34 ` [PATCH v7 4/6] pinctrl: add NXP MC33978/MC34978 pinctrl driver Oleksij Rempel
2026-03-27 16:34 ` [PATCH v7 5/6] hwmon: add NXP MC33978/MC34978 driver Oleksij Rempel
2026-03-27 16:34 ` [PATCH v7 6/6] mux: add NXP MC33978/MC34978 AMUX driver Oleksij Rempel
2026-03-29 5:56 ` Oleksij Rempel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aci_A1ye2N3g0IIQ@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=conor+dt@kernel.org \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox