From: Bjorn Andersson <andersson@kernel.org>
To: Le Qi <le.qi@oss.qualcomm.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel@oss.qualcomm.com,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: Re: [PATCH v4 1/2] arm64: dts: qcom: talos: Add GPR node, audio services, and MI2S1 TLMM pins
Date: Mon, 30 Mar 2026 08:57:02 -0500 [thread overview]
Message-ID: <acqAf9fCi8GPxjkM@baldur> (raw)
In-Reply-To: <20260324060405.3098891-2-le.qi@oss.qualcomm.com>
On Tue, Mar 24, 2026 at 02:04:04PM +0800, Le Qi wrote:
> This patch adds the Generic Pack Router (GPR) node together with
Please avoid phrases such as "This patch". Start your commit message
with a description of the problem or purpose of the patch.
> Audio Process Manager (APM) and Proxy Resource Manager (PRM)
> audio service nodes to the Talos device tree description.
>
> It also introduces MI2S1 pinctrl states for data0, data1, sck,
> and ws lines, grouped into a single entry at the SoC-level DTSI
> for better reuse and clarity.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/talos.dtsi | 54 +++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
> index f69a40fb8e28..cd451a112573 100644
> --- a/arch/arm64/boot/dts/qcom/talos.dtsi
> +++ b/arch/arm64/boot/dts/qcom/talos.dtsi
> @@ -19,6 +19,7 @@
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/power/qcom,rpmhpd.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/soc/qcom,gpr.h>
Keep includes sorted alphabetically.
Regards,
Bjorn
>
> / {
> interrupt-parent = <&intc>;
> @@ -1553,6 +1554,20 @@ tlmm: pinctrl@3100000 {
> #interrupt-cells = <2>;
> wakeup-parent = <&pdc>;
>
> + mi2s1_pins: mi2s1-state {
> + pins = "gpio108", "gpio109", "gpio110", "gpio111";
> + function = "mi2s_1";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> + mi2s_mclk: mi2s-mclk-state {
> + pins = "gpio122";
> + function = "mclk2";
> + drive-strength = <8>;
> + bias-disable;
> + };
> +
> qup_i2c1_data_clk: qup-i2c1-data-clk-state {
> pins = "gpio4", "gpio5";
> function = "qup0";
> @@ -4696,6 +4711,45 @@ compute-cb@6 {
> dma-coherent;
> };
> };
> +
> + gpr: gpr {
> + compatible = "qcom,gpr";
> + qcom,glink-channels = "adsp_apps";
> + qcom,domain = <GPR_DOMAIN_ID_ADSP>;
> + qcom,intents = <512 20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + q6apm: service@1 {
> + compatible = "qcom,q6apm";
> + reg = <GPR_APM_MODULE_IID>;
> + #sound-dai-cells = <0>;
> + qcom,protection-domain = "avs/audio",
> + "msm/adsp/audio_pd";
> +
> + q6apmbedai: bedais {
> + compatible = "qcom,q6apm-lpass-dais";
> + #sound-dai-cells = <1>;
> + };
> +
> + q6apmdai: dais {
> + compatible = "qcom,q6apm-dais";
> + iommus = <&apps_smmu 0x1721 0x0>;
> + };
> + };
> +
> + q6prm: service@2 {
> + compatible = "qcom,q6prm";
> + reg = <GPR_PRM_MODULE_IID>;
> + qcom,protection-domain = "avs/audio",
> + "msm/adsp/audio_pd";
> +
> + q6prmcc: clock-controller {
> + compatible = "qcom,q6prm-lpass-clocks";
> + #clock-cells = <2>;
> + };
> + };
> + };
> };
> };
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2026-03-30 13:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 6:04 [PATCH v4 0/2] arm64: dts: qcom: QCS615 Talos EVK audio support Le Qi
2026-03-24 6:04 ` [PATCH v4 1/2] arm64: dts: qcom: talos: Add GPR node, audio services, and MI2S1 TLMM pins Le Qi
2026-03-30 13:57 ` Bjorn Andersson [this message]
2026-03-24 6:04 ` [PATCH v4 2/2] arm64: dts: qcom: talos-evk: Add sound card support with DA7212 codec Le Qi
2026-03-30 13:53 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=acqAf9fCi8GPxjkM@baldur \
--to=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=le.qi@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox