* [PATCH] drm/stm: ltdc: add pinctrl for DPI encoder mode
@ 2019-08-02 14:47 Yannick Fertré
2019-09-02 8:47 ` Philippe CORNU
0 siblings, 1 reply; 3+ messages in thread
From: Yannick Fertré @ 2019-08-02 14:47 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
Fabrice Gasnier
The implementation of functions encoder_enable and encoder_disable
make possible to control the pinctrl according to the encoder type.
The pinctrl must be activated only if the encoder type is DPI.
This helps to move the DPI-related pinctrl configuration from
all the panel or bridge to the LTDC dt node.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 3ab4fbf..1c4fde0 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_graph.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
@@ -1040,6 +1041,36 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
.destroy = drm_encoder_cleanup,
};
+static void ltdc_encoder_disable(struct drm_encoder *encoder)
+{
+ struct drm_device *ddev = encoder->dev;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Set to sleep state the pinctrl whatever type of encoder */
+ pinctrl_pm_select_sleep_state(ddev->dev);
+}
+
+static void ltdc_encoder_enable(struct drm_encoder *encoder)
+{
+ struct drm_device *ddev = encoder->dev;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /*
+ * Set to default state the pinctrl only with DPI type.
+ * Others types like DSI, don't need pinctrl due to
+ * internal bridge (the signals do not come out of the chipset).
+ */
+ if (encoder->encoder_type == DRM_MODE_ENCODER_DPI)
+ pinctrl_pm_select_default_state(ddev->dev);
+}
+
+static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
+ .disable = ltdc_encoder_disable,
+ .enable = ltdc_encoder_enable,
+};
+
static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
{
struct drm_encoder *encoder;
@@ -1055,6 +1086,8 @@ static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
drm_encoder_init(ddev, encoder, <dc_encoder_funcs,
DRM_MODE_ENCODER_DPI, NULL);
+ drm_encoder_helper_add(encoder, <dc_encoder_helper_funcs);
+
ret = drm_bridge_attach(encoder, bridge, NULL);
if (ret) {
drm_encoder_cleanup(encoder);
@@ -1280,6 +1313,8 @@ int ltdc_load(struct drm_device *ddev)
clk_disable_unprepare(ldev->pixel_clk);
+ pinctrl_pm_select_sleep_state(ddev->dev);
+
pm_runtime_enable(ddev->dev);
return 0;
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] drm/stm: ltdc: add pinctrl for DPI encoder mode
2019-08-02 14:47 [PATCH] drm/stm: ltdc: add pinctrl for DPI encoder mode Yannick Fertré
@ 2019-09-02 8:47 ` Philippe CORNU
2019-09-02 9:35 ` Benjamin Gaignard
0 siblings, 1 reply; 3+ messages in thread
From: Philippe CORNU @ 2019-09-02 8:47 UTC (permalink / raw)
To: Yannick FERTRE, Maxime Coquelin, Alexandre TORGUE, Rob Herring,
Mark Rutland, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Benjamin GAIGNARD, Fabrice GASNIER
Hi Yannick,
On 8/2/19 4:47 PM, Yannick Fertré wrote:
> The implementation of functions encoder_enable and encoder_disable
> make possible to control the pinctrl according to the encoder type.
> The pinctrl must be activated only if the encoder type is DPI.
> This helps to move the DPI-related pinctrl configuration from
> all the panel or bridge to the LTDC dt node.
>
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> ---
> drivers/gpu/drm/stm/ltdc.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index 3ab4fbf..1c4fde0 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -15,6 +15,7 @@
> #include <linux/module.h>
> #include <linux/of_address.h>
> #include <linux/of_graph.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/reset.h>
> @@ -1040,6 +1041,36 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
> .destroy = drm_encoder_cleanup,
> };
>
> +static void ltdc_encoder_disable(struct drm_encoder *encoder)
> +{
> + struct drm_device *ddev = encoder->dev;
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + /* Set to sleep state the pinctrl whatever type of encoder */
> + pinctrl_pm_select_sleep_state(ddev->dev);
> +}
> +
> +static void ltdc_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct drm_device *ddev = encoder->dev;
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + /*
> + * Set to default state the pinctrl only with DPI type.
> + * Others types like DSI, don't need pinctrl due to
> + * internal bridge (the signals do not come out of the chipset).
> + */
> + if (encoder->encoder_type == DRM_MODE_ENCODER_DPI)
> + pinctrl_pm_select_default_state(ddev->dev);
> +}
> +
> +static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
> + .disable = ltdc_encoder_disable,
> + .enable = ltdc_encoder_enable,
> +};
> +
> static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
> {
> struct drm_encoder *encoder;
> @@ -1055,6 +1086,8 @@ static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
> drm_encoder_init(ddev, encoder, <dc_encoder_funcs,
> DRM_MODE_ENCODER_DPI, NULL);
>
> + drm_encoder_helper_add(encoder, <dc_encoder_helper_funcs);
> +
> ret = drm_bridge_attach(encoder, bridge, NULL);
> if (ret) {
> drm_encoder_cleanup(encoder);
> @@ -1280,6 +1313,8 @@ int ltdc_load(struct drm_device *ddev)
>
> clk_disable_unprepare(ldev->pixel_clk);
>
> + pinctrl_pm_select_sleep_state(ddev->dev);
> +
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Thanks
Philippe :)
> pm_runtime_enable(ddev->dev);
>
> return 0;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] drm/stm: ltdc: add pinctrl for DPI encoder mode
2019-09-02 8:47 ` Philippe CORNU
@ 2019-09-02 9:35 ` Benjamin Gaignard
0 siblings, 0 replies; 3+ messages in thread
From: Benjamin Gaignard @ 2019-09-02 9:35 UTC (permalink / raw)
To: Philippe CORNU
Cc: Mark Rutland, devicetree@vger.kernel.org, Alexandre TORGUE,
linux-kernel@vger.kernel.org, ML dri-devel, Yannick FERTRE,
Rob Herring, Maxime Coquelin, Fabrice GASNIER,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, Benjamin GAIGNARD
+dri-devel mailing list
Le lun. 2 sept. 2019 à 10:47, Philippe CORNU <philippe.cornu@st.com> a écrit :
>
> Hi Yannick,
>
> On 8/2/19 4:47 PM, Yannick Fertré wrote:
> > The implementation of functions encoder_enable and encoder_disable
> > make possible to control the pinctrl according to the encoder type.
> > The pinctrl must be activated only if the encoder type is DPI.
> > This helps to move the DPI-related pinctrl configuration from
> > all the panel or bridge to the LTDC dt node.
> >
> > Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> > ---
> > drivers/gpu/drm/stm/ltdc.c | 35 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> > index 3ab4fbf..1c4fde0 100644
> > --- a/drivers/gpu/drm/stm/ltdc.c
> > +++ b/drivers/gpu/drm/stm/ltdc.c
> > @@ -15,6 +15,7 @@
> > #include <linux/module.h>
> > #include <linux/of_address.h>
> > #include <linux/of_graph.h>
> > +#include <linux/pinctrl/consumer.h>
> > #include <linux/platform_device.h>
> > #include <linux/pm_runtime.h>
> > #include <linux/reset.h>
> > @@ -1040,6 +1041,36 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
> > .destroy = drm_encoder_cleanup,
> > };
> >
> > +static void ltdc_encoder_disable(struct drm_encoder *encoder)
> > +{
> > + struct drm_device *ddev = encoder->dev;
> > +
> > + DRM_DEBUG_DRIVER("\n");
> > +
> > + /* Set to sleep state the pinctrl whatever type of encoder */
> > + pinctrl_pm_select_sleep_state(ddev->dev);
> > +}
> > +
> > +static void ltdc_encoder_enable(struct drm_encoder *encoder)
> > +{
> > + struct drm_device *ddev = encoder->dev;
> > +
> > + DRM_DEBUG_DRIVER("\n");
> > +
> > + /*
> > + * Set to default state the pinctrl only with DPI type.
> > + * Others types like DSI, don't need pinctrl due to
> > + * internal bridge (the signals do not come out of the chipset).
> > + */
> > + if (encoder->encoder_type == DRM_MODE_ENCODER_DPI)
> > + pinctrl_pm_select_default_state(ddev->dev);
> > +}
> > +
> > +static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
> > + .disable = ltdc_encoder_disable,
> > + .enable = ltdc_encoder_enable,
> > +};
> > +
> > static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
> > {
> > struct drm_encoder *encoder;
> > @@ -1055,6 +1086,8 @@ static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
> > drm_encoder_init(ddev, encoder, <dc_encoder_funcs,
> > DRM_MODE_ENCODER_DPI, NULL);
> >
> > + drm_encoder_helper_add(encoder, <dc_encoder_helper_funcs);
> > +
> > ret = drm_bridge_attach(encoder, bridge, NULL);
> > if (ret) {
> > drm_encoder_cleanup(encoder);
> > @@ -1280,6 +1313,8 @@ int ltdc_load(struct drm_device *ddev)
> >
> > clk_disable_unprepare(ldev->pixel_clk);
> >
> > + pinctrl_pm_select_sleep_state(ddev->dev);
> > +
>
> Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
>
> Thanks
> Philippe :)
>
> > pm_runtime_enable(ddev->dev);
> >
> > return 0;
> >
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-02 9:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-08-02 14:47 [PATCH] drm/stm: ltdc: add pinctrl for DPI encoder mode Yannick Fertré
2019-09-02 8:47 ` Philippe CORNU
2019-09-02 9:35 ` Benjamin Gaignard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).