Re: [PATCH v7 4/4] thermal: mediatek: add another get_temp ops for thermal sensors

[Daniel Lezcano <daniel.lezcano@linaro.org>]

Hi Amjad,


On 05/12/2022 11:41, Amjad Ouled-Ameur wrote:

[ ... ]

>>> @@ -1161,11 +1197,24 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>>>    
>>>    	platform_set_drvdata(pdev, mt);
>>>    
>>> -	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
>>> -					      &mtk_thermal_ops);
>>> -	if (IS_ERR(tzdev)) {
>>> -		ret = PTR_ERR(tzdev);
>>> -		goto err_disable_clk_peri_therm;
>>> +	for (i = 0; i < mt->conf->num_sensors + 1; i++) {
>>> +		tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
>>> +		if (!tz)
>>> +			return -ENOMEM;
>>> +
>>> +		tz->mt = mt;
>>> +		tz->id = i;
>>> +
>>> +		tzdev = devm_thermal_of_zone_register(&pdev->dev, i, tz, (i == 0) ?
>>> +							     &mtk_thermal_ops :
>>> +							     &mtk_thermal_sensor_ops);
>>
>> Here you use again the aggregation
> I addressed this concern in V6, could you please take a look and let me
> know what you think [0].
> 
> [0]: https://lore.kernel.org/all/5eb0cdc2-e9f9-dd42-bf80-b7dcd8bcc196@baylibre.com/

May I misunderstanding but AFAICS, this patch is setting the 
mtk_thermal_ops if the sensor id is zero. The get_temp is computing the 
max temperature in this ops which is what we don't want to do.


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog