Re: [PATCH v2 2/2] Input: goodix - Allow DT specification of missing reset pull-up

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 29-Apr-25 11:56 AM, Esben Haabendal wrote:
> In commit a2fd46cd3dbb ("Input: goodix - try not to touch the reset-pin on x86/ACPI devices")
> a fix for problems on various x86/ACPI devices where external
> pull-up is missing were added. The same type of problem can exist on
> device-tree platforms, and the fix can be activated by adding the
> no-reset-pull-up device-tree property.
> 
> Signed-off-by: Esben Haabendal <esben@geanix.com>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Thanks the new version looks good to me.

Regards,

Hans



> ---
>  drivers/input/touchscreen/goodix.c | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> index a3e8a51c91449533b4d5185746df6b98676053dd..ce4622bbcc89434a4d89c49bb97f084fb61aa448 100644
> --- a/drivers/input/touchscreen/goodix.c
> +++ b/drivers/input/touchscreen/goodix.c
> @@ -772,10 +772,12 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
>  
>  	/*
>  	 * Put the reset pin back in to input / high-impedance mode to save
> -	 * power. Only do this in the non ACPI case since some ACPI boards
> -	 * don't have a pull-up, so there the reset pin must stay active-high.
> +	 * power.
> +	 * Avoid doing this on boards that are known to not have external
> +	 * pull-up, and all ACPI boards since some ACPI boards don't have a
> +	 * pull-up. These boards need the reset pin to stay active-high.
>  	 */
> -	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
> +	if (ts->gpiod_rst_flags == GPIOD_IN) {
>  		error = gpiod_direction_input(ts->gpiod_rst);
>  		if (error)
>  			goto error;
> @@ -969,6 +971,13 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
>  	 */
>  	ts->gpiod_rst_flags = GPIOD_IN;
>  
> +	/*
> +	 * Devices that does not have pull-up on reset signal should not be
> +	 * changed to input
> +	 */
> +	if (device_property_read_bool(dev, "goodix,no-reset-pull-up"))
> +		ts->gpiod_rst_flags = GPIOD_ASIS;
> +
>  	ts->avdd28 = devm_regulator_get(dev, "AVDD28");
>  	if (IS_ERR(ts->avdd28))
>  		return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n");
>