Re: [PATCH v3 5/5] arch: arm64: dts: qcom: Add support for PCIe3a

[Qiang Yu <qiang.yu@oss.qualcomm.com>]

On Wed, Apr 15, 2026 at 09:44:15AM +0200, Krzysztof Kozlowski wrote:
> On Sun, Apr 12, 2026 at 11:26:00PM -0700, Qiang Yu wrote:
> > Describe PCIe3a controller and PHY. Also add required system resources
> > like regulators, clocks, interrupts and registers configuration for PCIe3a.
> > 
> > Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
> 
> subject: drop arch.
> 
> Please use subject prefixes matching the subsystem. You can get them for
> example with 'git log --oneline -- DIRECTORY_OR_FILE' on the directory
> your patch is touching. For bindings, the preferred subjects are
> explained here:
> https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters
>

Thanks for pointing me the link. I’ll drop arch: in next version.

> > ---
> >  arch/arm64/boot/dts/qcom/glymur.dtsi | 316 ++++++++++++++++++++++++++++++++++-
> >  1 file changed, 315 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
> > index f23cf81ddb77a4138deeb4e00dd8b316930a2feb..c15f87c37ecbad72076a6c731f4959a1a8bd8425 100644
> > --- a/arch/arm64/boot/dts/qcom/glymur.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
> > @@ -736,7 +736,7 @@ gcc: clock-controller@100000 {
> >  				 <0>,				/* USB 2 Phy PCIE PIPEGMUX */
> >  				 <0>,				/* USB 2 Phy PIPEGMUX */
> >  				 <0>,				/* USB 2 Phy SYS PCIE PIPEGMUX */
> > -				 <0>,				/* PCIe 3a */
> > +				 <&pcie3a_phy>,			/* PCIe 3a */
> >  				 <&pcie3b_phy>,			/* PCIe 3b */
> >  				 <&pcie4_phy>,			/* PCIe 4 */
> >  				 <&pcie5_phy>,			/* PCIe 5 */
> > @@ -3640,6 +3640,320 @@ pcie3b_port0: pcie@0 {
> >  			};
> 
> ...
> 
> > > +		pcie3a_phy: phy@f00000 {
> 
> Same comment as before.
>

The existing PCIe/PHY nodes are not strictly ordered by address. Current
order is:

- pcie4: pci@1bf0000
- pcie4_phy: phy@1bf6000
- pcie5: pci@1b40000
- pcie5_phy: phy@1b50000
- pcie6: pci@1c00000
- pcie6_phy: phy@1c06000
- pcie3b: pci@1b80000
- pcie3a: pci@1c10000 (added in this patch)
- pcie3a_phy: phy@f00000 (added in this patch)
- pcie3b_phy: phy@f10000

Do you want me to reorder these nodes to follow strict address order?

- Qiang Yu

> Best regards,
> Krzysztof
>