From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Svyatoslav Ryhel <clamor95@gmail.com>
Cc: Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH v1 1/5] media: lm3560: Add HWEN pin support
Date: Fri, 17 Apr 2026 15:15:45 +0300 [thread overview]
Message-ID: <aeIkceWY7SrulUPf@kekkonen.localdomain> (raw)
In-Reply-To: <20260417114226.100033-2-clamor95@gmail.com>
Hi Svyatoslav,
On Fri, Apr 17, 2026 at 02:42:22PM +0300, Svyatoslav Ryhel wrote:
> Add HWEN - logic high hardware enable input found in LM3560 to ensure its
> proper operation.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> drivers/media/i2c/lm3560.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
> index f4cc844f4e3c..e6af61415821 100644
> --- a/drivers/media/i2c/lm3560.c
> +++ b/drivers/media/i2c/lm3560.c
> @@ -11,6 +11,7 @@
>
> #include <linux/delay.h>
> #include <linux/module.h>
> +#include <linux/gpio.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> #include <linux/mutex.h>
> @@ -45,6 +46,7 @@ enum led_enable {
> * @dev: pointer to &struct device
> * @pdata: platform data
> * @regmap: reg. map for i2c
> + * @hwen_gpio: line connected to hwen pin
> * @lock: muxtex for serial access.
> * @led_mode: V4L2 LED mode
> * @ctrls_led: V4L2 controls
> @@ -54,6 +56,7 @@ struct lm3560_flash {
> struct device *dev;
> struct lm3560_platform_data *pdata;
> struct regmap *regmap;
> + struct gpio_desc *hwen_gpio;
> struct mutex lock;
>
> enum v4l2_flash_led_mode led_mode;
> @@ -425,6 +428,12 @@ static int lm3560_probe(struct i2c_client *client)
> flash->dev = &client->dev;
> mutex_init(&flash->lock);
>
> + flash->hwen_gpio = devm_gpiod_get_optional(&client->dev, "enable",
> + GPIOD_OUT_HIGH);
Please add runtime PM support for this so it can be powered on when needed.
> + if (IS_ERR(flash->hwen_gpio))
> + return dev_err_probe(&client->dev, PTR_ERR(flash->hwen_gpio),
> + "failed to get hwen gpio\n");
> +
> rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
> if (rval < 0)
> return rval;
> @@ -452,6 +461,8 @@ static void lm3560_remove(struct i2c_client *client)
> v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
> media_entity_cleanup(&flash->subdev_led[i].entity);
> }
> +
> + gpiod_set_value_cansleep(flash->hwen_gpio, 0);
> }
>
> static const struct i2c_device_id lm3560_id_table[] = {
--
Kind regards,
Sakari Ailus
next prev parent reply other threads:[~2026-04-17 12:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-17 11:42 [PATCH v1 0/5] media: lm3560: convert to use OF bindings Svyatoslav Ryhel
2026-04-17 11:42 ` [PATCH v1 1/5] media: lm3560: Add HWEN pin support Svyatoslav Ryhel
2026-04-17 12:15 ` Sakari Ailus [this message]
2026-04-17 11:42 ` [PATCH v1 2/5] media: lm3560: Add IN supply support Svyatoslav Ryhel
2026-04-17 12:17 ` Sakari Ailus
2026-04-17 12:37 ` Svyatoslav Ryhel
2026-04-17 12:46 ` Sakari Ailus
2026-04-17 11:42 ` [PATCH v1 3/5] media: lm3560: Fix v4l2 subdev registration Svyatoslav Ryhel
2026-04-17 11:42 ` [PATCH v1 4/5] media: lm3560: convert to use OF bindings Svyatoslav Ryhel
2026-04-17 11:42 ` [PATCH v1 5/5] dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver Svyatoslav Ryhel
2026-04-17 12:13 ` Sakari Ailus
2026-04-17 12:30 ` Svyatoslav Ryhel
2026-04-17 12:36 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aeIkceWY7SrulUPf@kekkonen.localdomain \
--to=sakari.ailus@linux.intel.com \
--cc=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox