Re: [PATCH v9 4/7] mfd: p3h2x4x: Add driver for NXP P3H2x4x i3c hub and on-die regulator

[Frank Li <Frank.li@nxp.com>]

On Mon, Apr 20, 2026 at 04:22:19PM +0530, Lakshay Piplani wrote:
> From: Aman Kumar Pandey <aman.kumarpandey@nxp.com>
>
> Add core MFD support for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841)
> family of multiport I3C hub devices. These devices connect to a host via
> I3C/I2C/SMBus and expose multiple downstream target ports.
>
> Signed-off-by: Aman Kumar Pandey <aman.kumarpandey@nxp.com>
> Signed-off-by: Vikash Bansal <vikash.bansal@nxp.com>
> Signed-off-by: Lakshay Piplani <lakshay.piplani@nxp.com>
>
> ---
...
> +static int p3h2x4x_device_probe_i3c(struct i3c_device *i3cdev)
> +{
> +	struct p3h2x4x_dev *p3h2x4x;
> +	int ret;
> +
> +	p3h2x4x = devm_kzalloc(&i3cdev->dev, sizeof(*p3h2x4x), GFP_KERNEL);
> +	if (!p3h2x4x)
> +		return -ENOMEM;
> +
> +	i3cdev_set_drvdata(i3cdev, p3h2x4x);
> +
> +	p3h2x4x->regmap = devm_regmap_init_i3c(i3cdev, &p3h2x4x_regmap_config);
> +	if (IS_ERR(p3h2x4x->regmap))
> +		return dev_err_probe(&i3cdev->dev, PTR_ERR(p3h2x4x->regmap),
> +				     "Failed to register HUB regmap\n");
> +
> +	p3h2x4x->is_p3h2x4x_in_i3c = true;

Needn't this one, you can check p3h2x4x->i3cdev to know if it is i3c dev.

Frank