[PATCH v4 0/3] riscv: sophgo: add thermal sensor support for cv180x/sg200x SoCs

[PATCH v4 0/3] riscv: sophgo: add thermal sensor support for cv180x/sg200x SoCs

[Haylen Chu]

This series implements driver for Sophgo cv180x/sg200x on-chip thermal
sensor and adds thermal zones for CV1800B SoCs.

Changed from v3:
1. style improvments
2. drop unnecessary dt parameters for simplicity

Changed from v2:
1. style and code improvements
2. use human-readable value for sensor parameters

Changed from v1:
1. style and code improvements
2. make sample parameters configurable
3. generalize document temperature calculating formula

Haylen Chu (3):
  dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal
  riscv: dts: sophgo: cv18xx: Add sensor device and thermal zone
  thermal: cv180x: Add cv180x thermal driver support

 .../thermal/sophgo,cv1800-thermal.yaml        |  55 ++++
 arch/riscv/boot/dts/sophgo/cv1800b.dtsi       |  30 +++
 arch/riscv/boot/dts/sophgo/cv18xx.dtsi        |   8 +
 drivers/thermal/Kconfig                       |   6 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/cv180x_thermal.c              | 241 ++++++++++++++++++
 6 files changed, 341 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
 create mode 100644 drivers/thermal/cv180x_thermal.c

-- 
2.45.2

[PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Haylen Chu]

Add devicetree binding documentation for thermal sensors integrated in
Sophgo CV180X SoCs.

Signed-off-by: Haylen Chu <heylenay@outlook.com>
---
 .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml

diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
new file mode 100644
index 000000000000..58bd4432cd10
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 on-SoC Thermal Sensor
+
+maintainers:
+  - Haylen Chu <heylenay@outlook.com>
+
+description: Sophgo CV1800 on-SoC thermal sensor
+
+properties:
+  compatible:
+    enum:
+      - sophgo,cv1800-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: The thermal sensor clock
+
+  interrupts:
+    maxItems: 1
+
+  sample-rate-hz:
+    minimum: 1
+    maximum: 1908
+    default: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/sophgo,cv1800.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        thermal-sensor@30e0000 {
+            compatible = "sophgo,cv1800-thermal";
+            reg = <0x30e0000 0x100>;
+            clocks = <&clk CLK_TEMPSEN>;
+            interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+            #thermal-sensor-cells = <0>;
+        };
+...
-- 
2.45.2

[PATCH v4 2/3] riscv: dts: sophgo: cv18xx: Add sensor device and thermal zone

[Haylen Chu]

Add common sensor device Sophgo CV18xx SoCs and thermal zone for
CV1800b SoCs.

Signed-off-by: Haylen Chu <heylenay@outlook.com>
---
 arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 30 +++++++++++++++++++++++++
 arch/riscv/boot/dts/sophgo/cv18xx.dtsi  |  8 +++++++
 2 files changed, 38 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index ec9530972ae2..0b5c7bc94b05 100644
--- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -12,6 +12,34 @@ memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x4000000>;
 	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive   = <1000>;
+			polling-delay           = <1000>;
+			thermal-sensors         = <&soc_temp>;
+
+			trips {
+				soc_passive: soc-passive {
+					temperature     = <75000>;
+					hysteresis      = <5000>;
+					type            = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature     = <85000>;
+					hysteresis      = <5000>;
+					type            = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature     = <100000>;
+					hysteresis      = <0>;
+					type            = "critical";
+				};
+			};
+		};
+	};
 };
 
 &plic {
@@ -25,3 +53,5 @@ &clint {
 &clk {
 	compatible = "sophgo,cv1800-clk";
 };
+
+
diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
index 891932ae470f..76b02cc279aa 100644
--- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -310,5 +310,13 @@ clint: timer@74000000 {
 			reg = <0x74000000 0x10000>;
 			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
 		};
+
+		soc_temp: thermal-sensor@30e0000 {
+			compatible = "sophgo,cv1800-thermal";
+			reg = <0x30e0000 0x100>;
+			clocks = <&clk CLK_TEMPSEN>;
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
-- 
2.45.2

[PATCH v4 3/3] thermal: cv180x: Add cv180x thermal driver support

[Haylen Chu]

Add support for cv180x SoCs integrated thermal sensors.

Signed-off-by: Haylen Chu <heylenay@outlook.com>
---
 drivers/thermal/Kconfig          |   6 +
 drivers/thermal/Makefile         |   1 +
 drivers/thermal/cv180x_thermal.c | 241 +++++++++++++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 drivers/thermal/cv180x_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 204ed89a3ec9..f53c973a361d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -514,4 +514,10 @@ config LOONGSON2_THERMAL
 	  is higher than the high temperature threshold or lower than the low
 	  temperature threshold, the interrupt will occur.
 
+config CV180X_THERMAL
+	tristate "Temperature sensor driver for Sophgo CV180X"
+	help
+	  If you say yes here you get support for thermal sensor integrated in
+	  Sophgo CV180X SoCs.
+
 endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 5cdf7d68687f..5b59bde8a579 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -65,3 +65,4 @@ obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
 obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
 obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
 obj-$(CONFIG_LOONGSON2_THERMAL)	+= loongson2_thermal.o
+obj-$(CONFIG_CV180X_THERMAL)	+= cv180x_thermal.o
diff --git a/drivers/thermal/cv180x_thermal.c b/drivers/thermal/cv180x_thermal.c
new file mode 100644
index 000000000000..8b726c0ad848
--- /dev/null
+++ b/drivers/thermal/cv180x_thermal.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Sophgo Inc.
+ * Copyright (C) 2024 Haylen Chu <heylenay@outlook.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define TEMPSEN_VERSION					0x0
+#define TEMPSEN_CTRL					0x4
+#define  TEMPSEN_CTRL_EN				BIT(0)
+#define  TEMPSEN_CTRL_SEL_MASK				GENMASK(7, 4)
+#define  TEMPSEN_CTRL_SEL_OFFSET			4
+#define TEMPSEN_STATUS					0x8
+#define TEMPSEN_SET					0xc
+#define  TEMPSEN_SET_CHOPSEL_MASK			GENMASK(5, 4)
+#define  TEMPSEN_SET_CHOPSEL_OFFSET			4
+#define  TEMPSEN_SET_CHOPSEL_128T			0
+#define  TEMPSEN_SET_CHOPSEL_256T			1
+#define  TEMPSEN_SET_CHOPSEL_512T			2
+#define  TEMPSEN_SET_CHOPSEL_1024T			3
+#define  TEMPSEN_SET_ACCSEL_MASK			GENMASK(7, 6)
+#define  TEMPSEN_SET_ACCSEL_OFFSET			6
+#define  TEMPSEN_SET_ACCSEL_512T			0
+#define  TEMPSEN_SET_ACCSEL_1024T			1
+#define  TEMPSEN_SET_ACCSEL_2048T			2
+#define  TEMPSEN_SET_ACCSEL_4096T			3
+#define  TEMPSEN_SET_CYC_CLKDIV_MASK			GENMASK(15, 8)
+#define  TEMPSEN_SET_CYC_CLKDIV_OFFSET			8
+#define TEMPSEN_INTR_EN					0x10
+#define TEMPSEN_INTR_CLR				0x14
+#define TEMPSEN_INTR_STA				0x18
+#define TEMPSEN_INTR_RAW				0x1c
+#define TEMPSEN_RESULT(n)				(0x20 + (n) * 4)
+#define  TEMPSEN_RESULT_RESULT_MASK			GENMASK(12, 0)
+#define  TEMPSEN_RESULT_MAX_RESULT_MASK			GENMASK(28, 16)
+#define  TEMPSEN_RESULT_CLR_MAX_RESULT			BIT(31)
+#define TEMPSEN_AUTO_PERIOD				0x64
+#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK		GENMASK(23, 0)
+#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET		0
+
+struct cv180x_thermal_zone {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk_tempsen;
+	u32 sample_cycle;
+};
+
+static void cv180x_thermal_init(struct cv180x_thermal_zone *ctz)
+{
+	void __iomem *base = ctz->base;
+	u32 regval;
+
+	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
+	writel(TEMPSEN_RESULT_CLR_MAX_RESULT, base + TEMPSEN_RESULT(0));
+
+	regval = readl(base + TEMPSEN_SET);
+	regval &= ~TEMPSEN_SET_CHOPSEL_MASK;
+	regval &= ~TEMPSEN_SET_ACCSEL_MASK;
+	regval &= ~TEMPSEN_SET_CYC_CLKDIV_MASK;
+	regval |= TEMPSEN_SET_CHOPSEL_1024T << TEMPSEN_SET_CHOPSEL_OFFSET;
+	regval |= TEMPSEN_SET_ACCSEL_2048T << TEMPSEN_SET_ACCSEL_OFFSET;
+	regval |= 0x31 << TEMPSEN_SET_CYC_CLKDIV_OFFSET;
+	writel(regval, base + TEMPSEN_SET);
+
+	regval = readl(base + TEMPSEN_AUTO_PERIOD);
+	regval &= ~TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK;
+	regval |= ctz->sample_cycle << TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET;
+	writel(regval, base + TEMPSEN_AUTO_PERIOD);
+
+	regval = readl(base + TEMPSEN_CTRL);
+	regval &= ~TEMPSEN_CTRL_SEL_MASK;
+	regval |= 1 << TEMPSEN_CTRL_SEL_OFFSET;
+	regval |= TEMPSEN_CTRL_EN;
+	writel(regval, base + TEMPSEN_CTRL);
+}
+
+static void cv180x_thermal_deinit(struct cv180x_thermal_zone *ct)
+{
+	void __iomem *base = ct->base;
+	u32 regval;
+
+	regval = readl(base + TEMPSEN_CTRL);
+	regval &= ~(TEMPSEN_CTRL_SEL_MASK | TEMPSEN_CTRL_EN);
+	writel(regval, base + TEMPSEN_CTRL);
+
+	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
+}
+
+/*
+ *	Raw register value to temperature (mC) formula:
+ *
+ *		       read_val * 1000 * 716
+ *	Temperature = ----------------------- - 273000
+ *				divider
+ *
+ *	where divider should be ticks number of accumulation period,
+ *	e.g. 2048 for TEMPSEN_CTRL_ACCSEL_2048T
+ */
+static int cv180x_calc_temp(struct cv180x_thermal_zone *ctz, u32 result)
+{
+	return (result * 1000) * 716 / 2048 - 273000;
+}
+
+static int cv180x_get_temp(struct thermal_zone_device *tdev, int *temperature)
+{
+	struct cv180x_thermal_zone *ctz = thermal_zone_device_priv(tdev);
+	void __iomem *base = ctz->base;
+	u32 result;
+
+	result = readl(base + TEMPSEN_RESULT(0)) & TEMPSEN_RESULT_RESULT_MASK;
+	*temperature = cv180x_calc_temp(ctz, result);
+
+	return 0;
+}
+
+static const struct thermal_zone_device_ops cv180x_thermal_ops = {
+	.get_temp = cv180x_get_temp,
+};
+
+static const struct of_device_id cv180x_thermal_of_match[] = {
+	{ .compatible = "sophgo,cv1800-thermal" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cv180x_thermal_of_match);
+
+static int
+cv180x_parse_dt(struct cv180x_thermal_zone *ctz)
+{
+	struct device_node *np = ctz->dev->of_node;
+	u32 tmp;
+
+	if (of_property_read_u32(np, "sample-rate-hz", &tmp)) {
+		ctz->sample_cycle = 1000000;
+	} else {
+		/* sample cycle should be at least 524us */
+		if (tmp > 1000000 / 524) {
+			dev_err(ctz->dev, "invalid sample rate %d\n", tmp);
+			return -EINVAL;
+		}
+
+		ctz->sample_cycle = 1000000 / tmp;
+	}
+
+	return 0;
+}
+
+static int cv180x_thermal_probe(struct platform_device *pdev)
+{
+	struct cv180x_thermal_zone *ctz;
+	struct thermal_zone_device *tz;
+	struct resource *res;
+	int ret;
+
+	ctz = devm_kzalloc(&pdev->dev, sizeof(*ctz), GFP_KERNEL);
+	if (!ctz)
+		return -ENOMEM;
+
+	ctz->dev = &pdev->dev;
+
+	ret = cv180x_parse_dt(ctz);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to parse dt\n");
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ctz->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ctz->base))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->base),
+				     "failed to map tempsen registers\n");
+
+	ctz->clk_tempsen = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(ctz->clk_tempsen))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->clk_tempsen),
+				     "failed to get clk_tempsen\n");
+
+	cv180x_thermal_init(ctz);
+
+	tz = devm_thermal_of_zone_register(&pdev->dev, 0, ctz,
+					   &cv180x_thermal_ops);
+	if (IS_ERR(tz))
+		return dev_err_probe(&pdev->dev, PTR_ERR(tz),
+				     "failed to register thermal zone\n");
+
+	platform_set_drvdata(pdev, ctz);
+
+	return 0;
+}
+
+static int cv180x_thermal_remove(struct platform_device *pdev)
+{
+	struct cv180x_thermal_zone *ctz = platform_get_drvdata(pdev);
+
+	cv180x_thermal_deinit(ctz);
+
+	return 0;
+}
+
+static int __maybe_unused cv180x_thermal_suspend(struct device *dev)
+{
+	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
+
+	cv180x_thermal_deinit(ctz);
+	clk_disable_unprepare(ctz->clk_tempsen);
+
+	return 0;
+}
+
+static int __maybe_unused cv180x_thermal_resume(struct device *dev)
+{
+	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
+
+	clk_prepare_enable(ctz->clk_tempsen);
+	cv180x_thermal_init(ctz);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cv180x_thermal_pm_ops,
+			 cv180x_thermal_suspend, cv180x_thermal_resume);
+
+static struct platform_driver cv180x_thermal_driver = {
+	.probe = cv180x_thermal_probe,
+	.remove = cv180x_thermal_remove,
+	.driver = {
+		.name = "cv180x-thermal",
+		.pm = &cv180x_thermal_pm_ops,
+		.of_match_table = cv180x_thermal_of_match,
+	},
+};
+
+module_platform_driver(cv180x_thermal_driver);
+
+MODULE_DESCRIPTION("Sophgo CV180x thermal driver");
+MODULE_AUTHOR("Haylen Chu <heylenay@outlook.com>");
+MODULE_LICENSE("GPL");
-- 
2.45.2

Re: [PATCH v4 2/3] riscv: dts: sophgo: cv18xx: Add sensor device and thermal zone

[Chen Wang]

On 2024/7/16 17:42, Haylen Chu wrote:
> Add common sensor device Sophgo CV18xx SoCs and thermal zone for
> CV1800b SoCs.
>
> Signed-off-by: Haylen Chu <heylenay@outlook.com>
> ---
>   arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 30 +++++++++++++++++++++++++
>   arch/riscv/boot/dts/sophgo/cv18xx.dtsi  |  8 +++++++
>   2 files changed, 38 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> index ec9530972ae2..0b5c7bc94b05 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -12,6 +12,34 @@ memory@80000000 {
>   		device_type = "memory";
>   		reg = <0x80000000 0x4000000>;
>   	};
> +
> +	thermal-zones {
> +		soc-thermal {
> +			polling-delay-passive   = <1000>;
> +			polling-delay           = <1000>;
> +			thermal-sensors         = <&soc_temp>;
> +
> +			trips {
> +				soc_passive: soc-passive {
> +					temperature     = <75000>;
> +					hysteresis      = <5000>;
> +					type            = "passive";
> +				};
> +
> +				soc_hot: soc-hot {
> +					temperature     = <85000>;
> +					hysteresis      = <5000>;
> +					type            = "hot";
> +				};
> +
> +				soc_critical: soc-critical {
> +					temperature     = <100000>;
> +					hysteresis      = <0>;
> +					type            = "critical";
> +				};
> +			};
> +		};
> +	};
>   };
>   
>   &plic {
> @@ -25,3 +53,5 @@ &clint {
>   &clk {
>   	compatible = "sophgo,cv1800-clk";
>   };
> +
> +
> diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> index 891932ae470f..76b02cc279aa 100644
> --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> @@ -310,5 +310,13 @@ clint: timer@74000000 {
>   			reg = <0x74000000 0x10000>;
>   			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
>   		};
> +
> +		soc_temp: thermal-sensor@30e0000 {

Nodes on any bus, thus using unit addresses for children, shall be 
ordered by unit address in ascending order.

See https://docs.kernel.org/devicetree/bindings/dts-coding-style.html.

> +			compatible = "sophgo,cv1800-thermal";
> +			reg = <0x30e0000 0x100>;
> +			clocks = <&clk CLK_TEMPSEN>;
> +			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
> +			#thermal-sensor-cells = <0>;
> +		};
>   	};
>   };

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Chen Wang]

On 2024/7/16 17:42, Haylen Chu wrote:
> Add devicetree binding documentation for thermal sensors integrated in
> Sophgo CV180X SoCs.
>
> Signed-off-by: Haylen Chu <heylenay@outlook.com>
> ---
>   .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++

I see sometimes you call it cv1800, and in patch 3, the file name is 
cv180x_thermal.c, and for dts changes, you changed cv18xx.dtsi. Please 
unify it.

I think sg200x is new name for cv181x serias, so if you want to cover 
cv180x/sg200x, is cv18xx better?

>   1 file changed, 55 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> new file mode 100644
> index 000000000000..58bd4432cd10
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sophgo CV1800 on-SoC Thermal Sensor
> +
> +maintainers:
> +  - Haylen Chu <heylenay@outlook.com>
> +
> +description: Sophgo CV1800 on-SoC thermal sensor
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sophgo,cv1800-thermal
cv18xx-thermal ?
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: The thermal sensor clock
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  sample-rate-hz:
> +    minimum: 1
> +    maximum: 1908
> +    default: 1
> +
> +  '#thermal-sensor-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/clock/sophgo,cv1800.h>
> +        #include <dt-bindings/interrupt-controller/irq.h>
> +        thermal-sensor@30e0000 {
> +            compatible = "sophgo,cv1800-thermal";
> +            reg = <0x30e0000 0x100>;
> +            clocks = <&clk CLK_TEMPSEN>;
> +            interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
> +            #thermal-sensor-cells = <0>;
> +        };
> +...

Re: [PATCH v4 3/3] thermal: cv180x: Add cv180x thermal driver support

[Chen Wang]

On 2024/7/16 17:42, Haylen Chu wrote:
> Add support for cv180x SoCs integrated thermal sensors.
>
> Signed-off-by: Haylen Chu <heylenay@outlook.com>
> ---
>   drivers/thermal/Kconfig          |   6 +
>   drivers/thermal/Makefile         |   1 +
>   drivers/thermal/cv180x_thermal.c | 241 +++++++++++++++++++++++++++++++
>   3 files changed, 248 insertions(+)
>   create mode 100644 drivers/thermal/cv180x_thermal.c
cv18xx_thermal.c ? See my comments in patch 1. When you deicide it, 
update this for all patches.
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 204ed89a3ec9..f53c973a361d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -514,4 +514,10 @@ config LOONGSON2_THERMAL
>   	  is higher than the high temperature threshold or lower than the low
>   	  temperature threshold, the interrupt will occur.
>   
> +config CV180X_THERMAL
Same question above, CV18XX_THERMAL?
> +	tristate "Temperature sensor driver for Sophgo CV180X"
> +	help
> +	  If you say yes here you get support for thermal sensor integrated in
> +	  Sophgo CV180X SoCs.
> +
>   endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 5cdf7d68687f..5b59bde8a579 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -65,3 +65,4 @@ obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
>   obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
>   obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
>   obj-$(CONFIG_LOONGSON2_THERMAL)	+= loongson2_thermal.o
> +obj-$(CONFIG_CV180X_THERMAL)	+= cv180x_thermal.o
> diff --git a/drivers/thermal/cv180x_thermal.c b/drivers/thermal/cv180x_thermal.c
> new file mode 100644
> index 000000000000..8b726c0ad848
> --- /dev/null
> +++ b/drivers/thermal/cv180x_thermal.c
> @@ -0,0 +1,241 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Sophgo Inc.
> + * Copyright (C) 2024 Haylen Chu <heylenay@outlook.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +#define TEMPSEN_VERSION					0x0
> +#define TEMPSEN_CTRL					0x4
> +#define  TEMPSEN_CTRL_EN				BIT(0)
> +#define  TEMPSEN_CTRL_SEL_MASK				GENMASK(7, 4)
> +#define  TEMPSEN_CTRL_SEL_OFFSET			4
> +#define TEMPSEN_STATUS					0x8
> +#define TEMPSEN_SET					0xc
> +#define  TEMPSEN_SET_CHOPSEL_MASK			GENMASK(5, 4)
> +#define  TEMPSEN_SET_CHOPSEL_OFFSET			4
> +#define  TEMPSEN_SET_CHOPSEL_128T			0
> +#define  TEMPSEN_SET_CHOPSEL_256T			1
> +#define  TEMPSEN_SET_CHOPSEL_512T			2
> +#define  TEMPSEN_SET_CHOPSEL_1024T			3
> +#define  TEMPSEN_SET_ACCSEL_MASK			GENMASK(7, 6)
> +#define  TEMPSEN_SET_ACCSEL_OFFSET			6
> +#define  TEMPSEN_SET_ACCSEL_512T			0
> +#define  TEMPSEN_SET_ACCSEL_1024T			1
> +#define  TEMPSEN_SET_ACCSEL_2048T			2
> +#define  TEMPSEN_SET_ACCSEL_4096T			3
> +#define  TEMPSEN_SET_CYC_CLKDIV_MASK			GENMASK(15, 8)
> +#define  TEMPSEN_SET_CYC_CLKDIV_OFFSET			8
> +#define TEMPSEN_INTR_EN					0x10
> +#define TEMPSEN_INTR_CLR				0x14
> +#define TEMPSEN_INTR_STA				0x18
> +#define TEMPSEN_INTR_RAW				0x1c
> +#define TEMPSEN_RESULT(n)				(0x20 + (n) * 4)
> +#define  TEMPSEN_RESULT_RESULT_MASK			GENMASK(12, 0)
> +#define  TEMPSEN_RESULT_MAX_RESULT_MASK			GENMASK(28, 16)
> +#define  TEMPSEN_RESULT_CLR_MAX_RESULT			BIT(31)
> +#define TEMPSEN_AUTO_PERIOD				0x64
> +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK		GENMASK(23, 0)
> +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET		0
> +
> +struct cv180x_thermal_zone {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct clk *clk_tempsen;
> +	u32 sample_cycle;
> +};
> +
> +static void cv180x_thermal_init(struct cv180x_thermal_zone *ctz)
> +{
> +	void __iomem *base = ctz->base;
> +	u32 regval;
> +
> +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> +	writel(TEMPSEN_RESULT_CLR_MAX_RESULT, base + TEMPSEN_RESULT(0));
> +
> +	regval = readl(base + TEMPSEN_SET);
> +	regval &= ~TEMPSEN_SET_CHOPSEL_MASK;
> +	regval &= ~TEMPSEN_SET_ACCSEL_MASK;
> +	regval &= ~TEMPSEN_SET_CYC_CLKDIV_MASK;
> +	regval |= TEMPSEN_SET_CHOPSEL_1024T << TEMPSEN_SET_CHOPSEL_OFFSET;
> +	regval |= TEMPSEN_SET_ACCSEL_2048T << TEMPSEN_SET_ACCSEL_OFFSET;
> +	regval |= 0x31 << TEMPSEN_SET_CYC_CLKDIV_OFFSET;
> +	writel(regval, base + TEMPSEN_SET);
> +
> +	regval = readl(base + TEMPSEN_AUTO_PERIOD);
> +	regval &= ~TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK;
> +	regval |= ctz->sample_cycle << TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET;
> +	writel(regval, base + TEMPSEN_AUTO_PERIOD);
> +
> +	regval = readl(base + TEMPSEN_CTRL);
> +	regval &= ~TEMPSEN_CTRL_SEL_MASK;
> +	regval |= 1 << TEMPSEN_CTRL_SEL_OFFSET;
> +	regval |= TEMPSEN_CTRL_EN;
> +	writel(regval, base + TEMPSEN_CTRL);
> +}
> +
> +static void cv180x_thermal_deinit(struct cv180x_thermal_zone *ct)
> +{
> +	void __iomem *base = ct->base;
> +	u32 regval;
> +
> +	regval = readl(base + TEMPSEN_CTRL);
> +	regval &= ~(TEMPSEN_CTRL_SEL_MASK | TEMPSEN_CTRL_EN);
> +	writel(regval, base + TEMPSEN_CTRL);
> +
> +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> +}
> +
> +/*
> + *	Raw register value to temperature (mC) formula:
> + *
> + *		       read_val * 1000 * 716
> + *	Temperature = ----------------------- - 273000
> + *				divider
> + *
> + *	where divider should be ticks number of accumulation period,
> + *	e.g. 2048 for TEMPSEN_CTRL_ACCSEL_2048T
> + */
> +static int cv180x_calc_temp(struct cv180x_thermal_zone *ctz, u32 result)
> +{
> +	return (result * 1000) * 716 / 2048 - 273000;
> +}
> +
> +static int cv180x_get_temp(struct thermal_zone_device *tdev, int *temperature)
> +{
> +	struct cv180x_thermal_zone *ctz = thermal_zone_device_priv(tdev);
> +	void __iomem *base = ctz->base;
> +	u32 result;
> +
> +	result = readl(base + TEMPSEN_RESULT(0)) & TEMPSEN_RESULT_RESULT_MASK;
> +	*temperature = cv180x_calc_temp(ctz, result);
> +
> +	return 0;
> +}
> +
> +static const struct thermal_zone_device_ops cv180x_thermal_ops = {
> +	.get_temp = cv180x_get_temp,
> +};
> +
> +static const struct of_device_id cv180x_thermal_of_match[] = {
> +	{ .compatible = "sophgo,cv1800-thermal" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, cv180x_thermal_of_match);
> +
> +static int
> +cv180x_parse_dt(struct cv180x_thermal_zone *ctz)
> +{
> +	struct device_node *np = ctz->dev->of_node;
> +	u32 tmp;
> +
> +	if (of_property_read_u32(np, "sample-rate-hz", &tmp)) {
> +		ctz->sample_cycle = 1000000;
> +	} else {
> +		/* sample cycle should be at least 524us */
> +		if (tmp > 1000000 / 524) {
> +			dev_err(ctz->dev, "invalid sample rate %d\n", tmp);
> +			return -EINVAL;
> +		}
> +
> +		ctz->sample_cycle = 1000000 / tmp;
> +	}
> +
> +	return 0;
> +}
> +
> +static int cv180x_thermal_probe(struct platform_device *pdev)
> +{
> +	struct cv180x_thermal_zone *ctz;
> +	struct thermal_zone_device *tz;
> +	struct resource *res;
> +	int ret;
> +
> +	ctz = devm_kzalloc(&pdev->dev, sizeof(*ctz), GFP_KERNEL);
> +	if (!ctz)
> +		return -ENOMEM;
> +
> +	ctz->dev = &pdev->dev;
> +
> +	ret = cv180x_parse_dt(ctz);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "failed to parse dt\n");
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	ctz->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(ctz->base))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->base),
> +				     "failed to map tempsen registers\n");
> +
> +	ctz->clk_tempsen = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(ctz->clk_tempsen))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->clk_tempsen),
> +				     "failed to get clk_tempsen\n");
> +
> +	cv180x_thermal_init(ctz);
> +
> +	tz = devm_thermal_of_zone_register(&pdev->dev, 0, ctz,
> +					   &cv180x_thermal_ops);
> +	if (IS_ERR(tz))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(tz),
> +				     "failed to register thermal zone\n");
> +
> +	platform_set_drvdata(pdev, ctz);
> +
> +	return 0;
> +}
> +
> +static int cv180x_thermal_remove(struct platform_device *pdev)
> +{
> +	struct cv180x_thermal_zone *ctz = platform_get_drvdata(pdev);
> +
> +	cv180x_thermal_deinit(ctz);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused cv180x_thermal_suspend(struct device *dev)
> +{
> +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> +
> +	cv180x_thermal_deinit(ctz);
> +	clk_disable_unprepare(ctz->clk_tempsen);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused cv180x_thermal_resume(struct device *dev)
> +{
> +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> +
> +	clk_prepare_enable(ctz->clk_tempsen);
> +	cv180x_thermal_init(ctz);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(cv180x_thermal_pm_ops,
> +			 cv180x_thermal_suspend, cv180x_thermal_resume);
> +
> +static struct platform_driver cv180x_thermal_driver = {
> +	.probe = cv180x_thermal_probe,
> +	.remove = cv180x_thermal_remove,
> +	.driver = {
> +		.name = "cv180x-thermal",
> +		.pm = &cv180x_thermal_pm_ops,
> +		.of_match_table = cv180x_thermal_of_match,
> +	},
> +};
> +
> +module_platform_driver(cv180x_thermal_driver);
> +
> +MODULE_DESCRIPTION("Sophgo CV180x thermal driver");
> +MODULE_AUTHOR("Haylen Chu <heylenay@outlook.com>");
> +MODULE_LICENSE("GPL");

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2728 bytes --]

On Tue, Jul 16, 2024 at 08:43:19PM +0800, Chen Wang wrote:
> 
> On 2024/7/16 17:42, Haylen Chu wrote:
> > Add devicetree binding documentation for thermal sensors integrated in
> > Sophgo CV180X SoCs.
> > 
> > Signed-off-by: Haylen Chu <heylenay@outlook.com>
> > ---
> >   .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
> 
> I see sometimes you call it cv1800, and in patch 3, the file name is
> cv180x_thermal.c, and for dts changes, you changed cv18xx.dtsi. Please unify
> it.
> 
> I think sg200x is new name for cv181x serias, so if you want to cover
> cv180x/sg200x, is cv18xx better?
> 
> >   1 file changed, 55 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > new file mode 100644
> > index 000000000000..58bd4432cd10
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > @@ -0,0 +1,55 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sophgo CV1800 on-SoC Thermal Sensor
> > +
> > +maintainers:
> > +  - Haylen Chu <heylenay@outlook.com>
> > +
> > +description: Sophgo CV1800 on-SoC thermal sensor
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sophgo,cv1800-thermal
> cv18xx-thermal ?

Please, no wildcards in compatibles :/

> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    description: The thermal sensor clock
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  sample-rate-hz:
> > +    minimum: 1
> > +    maximum: 1908
> > +    default: 1

I still don't think this belongs in the devicetree, but is actually
software policy.

Cheers,
Conor.

> > +
> > +  '#thermal-sensor-cells':
> > +    const: 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +        #include <dt-bindings/clock/sophgo,cv1800.h>
> > +        #include <dt-bindings/interrupt-controller/irq.h>
> > +        thermal-sensor@30e0000 {
> > +            compatible = "sophgo,cv1800-thermal";
> > +            reg = <0x30e0000 0x100>;
> > +            clocks = <&clk CLK_TEMPSEN>;
> > +            interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
> > +            #thermal-sensor-cells = <0>;
> > +        };
> > +...

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Krzysztof Kozlowski]

On 16/07/2024 11:42, Haylen Chu wrote:
> Add devicetree binding documentation for thermal sensors integrated in
> Sophgo CV180X SoCs.
> 
> Signed-off-by: Haylen Chu <heylenay@outlook.com>
> ---
>  .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> new file mode 100644
> index 000000000000..58bd4432cd10
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sophgo CV1800 on-SoC Thermal Sensor
> +
> +maintainers:
> +  - Haylen Chu <heylenay@outlook.com>
> +
> +description: Sophgo CV1800 on-SoC thermal sensor
> +

Missing $ref to thermal-sensor.yaml


> +properties:
> +  compatible:
> +    enum:
> +      - sophgo,cv1800-thermal
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: The thermal sensor clock

Description is useless. You miss constraints on the other hand, so maxItems.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  sample-rate-hz:
> +    minimum: 1
> +    maximum: 1908
> +    default: 1
> +
> +  '#thermal-sensor-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/clock/sophgo,cv1800.h>
> +        #include <dt-bindings/interrupt-controller/irq.h>

Use 4 spaces for example indentation.



Best regards,
Krzysztof

Re: [PATCH v4 2/3] riscv: dts: sophgo: cv18xx: Add sensor device and thermal zone

[Krzysztof Kozlowski]

On 16/07/2024 11:42, Haylen Chu wrote:
> +				soc_critical: soc-critical {
> +					temperature     = <100000>;
> +					hysteresis      = <0>;
> +					type            = "critical";
> +				};
> +			};
> +		};
> +	};
>  };
>  
>  &plic {
> @@ -25,3 +53,5 @@ &clint {
>  &clk {
>  	compatible = "sophgo,cv1800-clk";
>  };
> +
> +

Why? Drop.

Best regards,
Krzysztof

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Chen Wang]

On 2024/7/16 23:48, Conor Dooley wrote:
> On Tue, Jul 16, 2024 at 08:43:19PM +0800, Chen Wang wrote:
>> On 2024/7/16 17:42, Haylen Chu wrote:
>>> Add devicetree binding documentation for thermal sensors integrated in
>>> Sophgo CV180X SoCs.
>>>
>>> Signed-off-by: Haylen Chu <heylenay@outlook.com>
>>> ---
>>>    .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
>> I see sometimes you call it cv1800, and in patch 3, the file name is
>> cv180x_thermal.c, and for dts changes, you changed cv18xx.dtsi. Please unify
>> it.
>>
>> I think sg200x is new name for cv181x serias, so if you want to cover
>> cv180x/sg200x, is cv18xx better?
>>
>>>    1 file changed, 55 insertions(+)
>>>    create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>>> new file mode 100644
>>> index 000000000000..58bd4432cd10
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>>> @@ -0,0 +1,55 @@
>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Sophgo CV1800 on-SoC Thermal Sensor
>>> +
>>> +maintainers:
>>> +  - Haylen Chu <heylenay@outlook.com>
>>> +
>>> +description: Sophgo CV1800 on-SoC thermal sensor
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - sophgo,cv1800-thermal
>> cv18xx-thermal ?
> Please, no wildcards in compatibles :/

Sorry for my confusion.

Haylen, so you want a compatible that matches an actual SoC and use it 
everywhere?

Or we can add ones for each SoC and have a fallback to cv1800.


[......]

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Inochi Amaoto]

On Wed, Jul 17, 2024 at 08:05:10AM GMT, Chen Wang wrote:
> 
> On 2024/7/16 23:48, Conor Dooley wrote:
> > On Tue, Jul 16, 2024 at 08:43:19PM +0800, Chen Wang wrote:
> > > On 2024/7/16 17:42, Haylen Chu wrote:
> > > > Add devicetree binding documentation for thermal sensors integrated in
> > > > Sophgo CV180X SoCs.
> > > > 
> > > > Signed-off-by: Haylen Chu <heylenay@outlook.com>
> > > > ---
> > > >    .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
> > > I see sometimes you call it cv1800, and in patch 3, the file name is
> > > cv180x_thermal.c, and for dts changes, you changed cv18xx.dtsi. Please unify
> > > it.
> > > 
> > > I think sg200x is new name for cv181x serias, so if you want to cover
> > > cv180x/sg200x, is cv18xx better?
> > > 
> > > >    1 file changed, 55 insertions(+)
> > > >    create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > > > new file mode 100644
> > > > index 000000000000..58bd4432cd10
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > > > @@ -0,0 +1,55 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Sophgo CV1800 on-SoC Thermal Sensor
> > > > +
> > > > +maintainers:
> > > > +  - Haylen Chu <heylenay@outlook.com>
> > > > +
> > > > +description: Sophgo CV1800 on-SoC thermal sensor
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    enum:
> > > > +      - sophgo,cv1800-thermal
> > > cv18xx-thermal ?
> > Please, no wildcards in compatibles :/
> 
> Sorry for my confusion.
> 
> Haylen, so you want a compatible that matches an actual SoC and use it
> everywhere?
> 

This should depend. If this peripheral is SoC specific, it is OK
for using SoC specific compatible. Otherwise, it should be series
specific.

For thermal sensors, I suggest using series-based compatible name
as this peripheral is the same across the whole series IIRC.

> Or we can add ones for each SoC and have a fallback to cv1800.

SoC specific compatible means most of the SoC have different part
for this peripheral. For safety, it may not use the fallback 
generic compatible.

Regards,
Inochi

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Chen Wang]

On 2024/7/17 9:27, Inochi Amaoto wrote:
> On Wed, Jul 17, 2024 at 08:05:10AM GMT, Chen Wang wrote:
>> On 2024/7/16 23:48, Conor Dooley wrote:
>>> On Tue, Jul 16, 2024 at 08:43:19PM +0800, Chen Wang wrote:
>>>> On 2024/7/16 17:42, Haylen Chu wrote:
>>>>> Add devicetree binding documentation for thermal sensors integrated in
>>>>> Sophgo CV180X SoCs.
>>>>>
>>>>> Signed-off-by: Haylen Chu <heylenay@outlook.com>
>>>>> ---
>>>>>     .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
>>>> I see sometimes you call it cv1800, and in patch 3, the file name is
>>>> cv180x_thermal.c, and for dts changes, you changed cv18xx.dtsi. Please unify
>>>> it.
>>>>
>>>> I think sg200x is new name for cv181x serias, so if you want to cover
>>>> cv180x/sg200x, is cv18xx better?
>>>>
>>>>>     1 file changed, 55 insertions(+)
>>>>>     create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>>>>> new file mode 100644
>>>>> index 000000000000..58bd4432cd10
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
>>>>> @@ -0,0 +1,55 @@
>>>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>>>> +%YAML 1.2
>>>>> +---
>>>>> +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>>> +
>>>>> +title: Sophgo CV1800 on-SoC Thermal Sensor
>>>>> +
>>>>> +maintainers:
>>>>> +  - Haylen Chu <heylenay@outlook.com>
>>>>> +
>>>>> +description: Sophgo CV1800 on-SoC thermal sensor
>>>>> +
>>>>> +properties:
>>>>> +  compatible:
>>>>> +    enum:
>>>>> +      - sophgo,cv1800-thermal
>>>> cv18xx-thermal ?
>>> Please, no wildcards in compatibles :/
>> Sorry for my confusion.
>>
>> Haylen, so you want a compatible that matches an actual SoC and use it
>> everywhere?
>>
> This should depend. If this peripheral is SoC specific, it is OK
> for using SoC specific compatible. Otherwise, it should be series
> specific.
>
> For thermal sensors, I suggest using series-based compatible name
> as this peripheral is the same across the whole series IIRC.

What's the  "series-based compatible name" do you mean? Can you give an 
example?

And allow me clarify, what I said "a compatible that matches an actual 
SoC and use it everywhere" means to define "sophgo,cv1800-thermal" just 
as Haylen did and use it for all cv18xx SoC chips.

Anyway, as Conor suggested, we'd better not use wildcards (char 'x') in 
compatibles.

Thanks,

Chen

>> Or we can add ones for each SoC and have a fallback to cv1800.
> SoC specific compatible means most of the SoC have different part
> for this peripheral. For safety, it may not use the fallback
> generic compatible.
>
> Regards,
> Inochi

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Inochi Amaoto]

On Wed, Jul 17, 2024 at 10:14:46AM GMT, Chen Wang wrote:
> 
> On 2024/7/17 9:27, Inochi Amaoto wrote:
> > On Wed, Jul 17, 2024 at 08:05:10AM GMT, Chen Wang wrote:
> > > On 2024/7/16 23:48, Conor Dooley wrote:
> > > > On Tue, Jul 16, 2024 at 08:43:19PM +0800, Chen Wang wrote:
> > > > > On 2024/7/16 17:42, Haylen Chu wrote:
> > > > > > Add devicetree binding documentation for thermal sensors integrated in
> > > > > > Sophgo CV180X SoCs.
> > > > > > 
> > > > > > Signed-off-by: Haylen Chu <heylenay@outlook.com>
> > > > > > ---
> > > > > >     .../thermal/sophgo,cv1800-thermal.yaml        | 55 +++++++++++++++++++
> > > > > I see sometimes you call it cv1800, and in patch 3, the file name is
> > > > > cv180x_thermal.c, and for dts changes, you changed cv18xx.dtsi. Please unify
> > > > > it.
> > > > > 
> > > > > I think sg200x is new name for cv181x serias, so if you want to cover
> > > > > cv180x/sg200x, is cv18xx better?
> > > > > 
> > > > > >     1 file changed, 55 insertions(+)
> > > > > >     create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > > > > > new file mode 100644
> > > > > > index 000000000000..58bd4432cd10
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > > > > > @@ -0,0 +1,55 @@
> > > > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > > > > +%YAML 1.2
> > > > > > +---
> > > > > > +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
> > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > > +
> > > > > > +title: Sophgo CV1800 on-SoC Thermal Sensor
> > > > > > +
> > > > > > +maintainers:
> > > > > > +  - Haylen Chu <heylenay@outlook.com>
> > > > > > +
> > > > > > +description: Sophgo CV1800 on-SoC thermal sensor
> > > > > > +
> > > > > > +properties:
> > > > > > +  compatible:
> > > > > > +    enum:
> > > > > > +      - sophgo,cv1800-thermal
> > > > > cv18xx-thermal ?
> > > > Please, no wildcards in compatibles :/
> > > Sorry for my confusion.
> > > 
> > > Haylen, so you want a compatible that matches an actual SoC and use it
> > > everywhere?
> > > 
> > This should depend. If this peripheral is SoC specific, it is OK
> > for using SoC specific compatible. Otherwise, it should be series
> > specific.
> > 
> > For thermal sensors, I suggest using series-based compatible name
> > as this peripheral is the same across the whole series IIRC.
> 
> What's the  "series-based compatible name" do you mean? Can you give an
> example?
> 

You can take clk as an exmaple. "cv1800-clk", "cv1810-clk" and 
"sg2000-clk". As you already know, sophgo use the same clk tree
for the same series.

> And allow me clarify, what I said "a compatible that matches an actual SoC
> and use it everywhere" means to define "sophgo,cv1800-thermal" just as
> Haylen did and use it for all cv18xx SoC chips.
> 

I know it. But there may be something like the pinctrl. They share the same
logic, but have different data and layout. In fact, I am sure the thermal 
is not suitable for this case.

> Anyway, as Conor suggested, we'd better not use wildcards (char 'x') in
> compatibles.
> 

Yeah, I agree.

> Thanks,
> 
> Chen
> 
> > > Or we can add ones for each SoC and have a fallback to cv1800.
> > SoC specific compatible means most of the SoC have different part
> > for this peripheral. For safety, it may not use the fallback
> > generic compatible.
> > 
> > Regards,
> > Inochi

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Haylen Chu]

On Wed, Jul 17, 2024 at 08:05:10AM +0800, Chen Wang wrote:
> Haylen, so you want a compatible that matches an actual SoC and use it
> everywhere?
> 
> Or we can add ones for each SoC and have a fallback to cv1800.

I would prefer "sophgo,cv1800-thermal" and use it everywhere. I don't
see any difference on thermal sensors between cv18xx-series SoCs.

Best regards,
Haylen

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Haylen Chu]

On Wed, Jul 17, 2024 at 10:27:35AM +0800, Inochi Amaoto wrote:
> > And allow me clarify, what I said "a compatible that matches an actual SoC
> > and use it everywhere" means to define "sophgo,cv1800-thermal" just as
> > Haylen did and use it for all cv18xx SoC chips.
> > 
> 
> I know it. But there may be something like the pinctrl. They share the same
> logic, but have different data and layout. In fact, I am sure the thermal 
> is not suitable for this case.

But for the thermal sensor, they are exactly the same, I don't think
it's worth to add compatible strings for each SoC. Even though later
SoCs do come with a different design, we could add a new one with
little pain.

Best regards,
Haylen

> > Anyway, as Conor suggested, we'd better not use wildcards (char 'x') in
> > compatibles.
> > 
> 
> Yeah, I agree.
> 
> > Thanks,
> > 
> > Chen
> > 
> > > > Or we can add ones for each SoC and have a fallback to cv1800.
> > > SoC specific compatible means most of the SoC have different part
> > > for this peripheral. For safety, it may not use the fallback
> > > generic compatible.
> > > 
> > > Regards,
> > > Inochi

Re: [PATCH v4 3/3] thermal: cv180x: Add cv180x thermal driver support

[Haylen Chu]

On Tue, Jul 16, 2024 at 08:48:13PM +0800, Chen Wang wrote:
> 
> On 2024/7/16 17:42, Haylen Chu wrote:
> > Add support for cv180x SoCs integrated thermal sensors.
> > 
> > Signed-off-by: Haylen Chu <heylenay@outlook.com>
> > ---
> >   drivers/thermal/Kconfig          |   6 +
> >   drivers/thermal/Makefile         |   1 +
> >   drivers/thermal/cv180x_thermal.c | 241 +++++++++++++++++++++++++++++++
> >   3 files changed, 248 insertions(+)
> >   create mode 100644 drivers/thermal/cv180x_thermal.c
> cv18xx_thermal.c ? See my comments in patch 1. When you deicide it, update
> this for all patches.

I would use unified "cv1800" in next revision.

Best regards,
Haylen


> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 204ed89a3ec9..f53c973a361d 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -514,4 +514,10 @@ config LOONGSON2_THERMAL
> >   	  is higher than the high temperature threshold or lower than the low
> >   	  temperature threshold, the interrupt will occur.
> > +config CV180X_THERMAL
> Same question above, CV18XX_THERMAL?
> > +	tristate "Temperature sensor driver for Sophgo CV180X"
> > +	help
> > +	  If you say yes here you get support for thermal sensor integrated in
> > +	  Sophgo CV180X SoCs.
> > +
> >   endif
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index 5cdf7d68687f..5b59bde8a579 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -65,3 +65,4 @@ obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> >   obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
> >   obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
> >   obj-$(CONFIG_LOONGSON2_THERMAL)	+= loongson2_thermal.o
> > +obj-$(CONFIG_CV180X_THERMAL)	+= cv180x_thermal.o
> > diff --git a/drivers/thermal/cv180x_thermal.c b/drivers/thermal/cv180x_thermal.c
> > new file mode 100644
> > index 000000000000..8b726c0ad848
> > --- /dev/null
> > +++ b/drivers/thermal/cv180x_thermal.c
> > @@ -0,0 +1,241 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Sophgo Inc.
> > + * Copyright (C) 2024 Haylen Chu <heylenay@outlook.com>
> > + */
> > +
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/thermal.h>
> > +
> > +#define TEMPSEN_VERSION					0x0
> > +#define TEMPSEN_CTRL					0x4
> > +#define  TEMPSEN_CTRL_EN				BIT(0)
> > +#define  TEMPSEN_CTRL_SEL_MASK				GENMASK(7, 4)
> > +#define  TEMPSEN_CTRL_SEL_OFFSET			4
> > +#define TEMPSEN_STATUS					0x8
> > +#define TEMPSEN_SET					0xc
> > +#define  TEMPSEN_SET_CHOPSEL_MASK			GENMASK(5, 4)
> > +#define  TEMPSEN_SET_CHOPSEL_OFFSET			4
> > +#define  TEMPSEN_SET_CHOPSEL_128T			0
> > +#define  TEMPSEN_SET_CHOPSEL_256T			1
> > +#define  TEMPSEN_SET_CHOPSEL_512T			2
> > +#define  TEMPSEN_SET_CHOPSEL_1024T			3
> > +#define  TEMPSEN_SET_ACCSEL_MASK			GENMASK(7, 6)
> > +#define  TEMPSEN_SET_ACCSEL_OFFSET			6
> > +#define  TEMPSEN_SET_ACCSEL_512T			0
> > +#define  TEMPSEN_SET_ACCSEL_1024T			1
> > +#define  TEMPSEN_SET_ACCSEL_2048T			2
> > +#define  TEMPSEN_SET_ACCSEL_4096T			3
> > +#define  TEMPSEN_SET_CYC_CLKDIV_MASK			GENMASK(15, 8)
> > +#define  TEMPSEN_SET_CYC_CLKDIV_OFFSET			8
> > +#define TEMPSEN_INTR_EN					0x10
> > +#define TEMPSEN_INTR_CLR				0x14
> > +#define TEMPSEN_INTR_STA				0x18
> > +#define TEMPSEN_INTR_RAW				0x1c
> > +#define TEMPSEN_RESULT(n)				(0x20 + (n) * 4)
> > +#define  TEMPSEN_RESULT_RESULT_MASK			GENMASK(12, 0)
> > +#define  TEMPSEN_RESULT_MAX_RESULT_MASK			GENMASK(28, 16)
> > +#define  TEMPSEN_RESULT_CLR_MAX_RESULT			BIT(31)
> > +#define TEMPSEN_AUTO_PERIOD				0x64
> > +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK		GENMASK(23, 0)
> > +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET		0
> > +
> > +struct cv180x_thermal_zone {
> > +	struct device *dev;
> > +	void __iomem *base;
> > +	struct clk *clk_tempsen;
> > +	u32 sample_cycle;
> > +};
> > +
> > +static void cv180x_thermal_init(struct cv180x_thermal_zone *ctz)
> > +{
> > +	void __iomem *base = ctz->base;
> > +	u32 regval;
> > +
> > +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> > +	writel(TEMPSEN_RESULT_CLR_MAX_RESULT, base + TEMPSEN_RESULT(0));
> > +
> > +	regval = readl(base + TEMPSEN_SET);
> > +	regval &= ~TEMPSEN_SET_CHOPSEL_MASK;
> > +	regval &= ~TEMPSEN_SET_ACCSEL_MASK;
> > +	regval &= ~TEMPSEN_SET_CYC_CLKDIV_MASK;
> > +	regval |= TEMPSEN_SET_CHOPSEL_1024T << TEMPSEN_SET_CHOPSEL_OFFSET;
> > +	regval |= TEMPSEN_SET_ACCSEL_2048T << TEMPSEN_SET_ACCSEL_OFFSET;
> > +	regval |= 0x31 << TEMPSEN_SET_CYC_CLKDIV_OFFSET;
> > +	writel(regval, base + TEMPSEN_SET);
> > +
> > +	regval = readl(base + TEMPSEN_AUTO_PERIOD);
> > +	regval &= ~TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK;
> > +	regval |= ctz->sample_cycle << TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET;
> > +	writel(regval, base + TEMPSEN_AUTO_PERIOD);
> > +
> > +	regval = readl(base + TEMPSEN_CTRL);
> > +	regval &= ~TEMPSEN_CTRL_SEL_MASK;
> > +	regval |= 1 << TEMPSEN_CTRL_SEL_OFFSET;
> > +	regval |= TEMPSEN_CTRL_EN;
> > +	writel(regval, base + TEMPSEN_CTRL);
> > +}
> > +
> > +static void cv180x_thermal_deinit(struct cv180x_thermal_zone *ct)
> > +{
> > +	void __iomem *base = ct->base;
> > +	u32 regval;
> > +
> > +	regval = readl(base + TEMPSEN_CTRL);
> > +	regval &= ~(TEMPSEN_CTRL_SEL_MASK | TEMPSEN_CTRL_EN);
> > +	writel(regval, base + TEMPSEN_CTRL);
> > +
> > +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> > +}
> > +
> > +/*
> > + *	Raw register value to temperature (mC) formula:
> > + *
> > + *		       read_val * 1000 * 716
> > + *	Temperature = ----------------------- - 273000
> > + *				divider
> > + *
> > + *	where divider should be ticks number of accumulation period,
> > + *	e.g. 2048 for TEMPSEN_CTRL_ACCSEL_2048T
> > + */
> > +static int cv180x_calc_temp(struct cv180x_thermal_zone *ctz, u32 result)
> > +{
> > +	return (result * 1000) * 716 / 2048 - 273000;
> > +}
> > +
> > +static int cv180x_get_temp(struct thermal_zone_device *tdev, int *temperature)
> > +{
> > +	struct cv180x_thermal_zone *ctz = thermal_zone_device_priv(tdev);
> > +	void __iomem *base = ctz->base;
> > +	u32 result;
> > +
> > +	result = readl(base + TEMPSEN_RESULT(0)) & TEMPSEN_RESULT_RESULT_MASK;
> > +	*temperature = cv180x_calc_temp(ctz, result);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct thermal_zone_device_ops cv180x_thermal_ops = {
> > +	.get_temp = cv180x_get_temp,
> > +};
> > +
> > +static const struct of_device_id cv180x_thermal_of_match[] = {
> > +	{ .compatible = "sophgo,cv1800-thermal" },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, cv180x_thermal_of_match);
> > +
> > +static int
> > +cv180x_parse_dt(struct cv180x_thermal_zone *ctz)
> > +{
> > +	struct device_node *np = ctz->dev->of_node;
> > +	u32 tmp;
> > +
> > +	if (of_property_read_u32(np, "sample-rate-hz", &tmp)) {
> > +		ctz->sample_cycle = 1000000;
> > +	} else {
> > +		/* sample cycle should be at least 524us */
> > +		if (tmp > 1000000 / 524) {
> > +			dev_err(ctz->dev, "invalid sample rate %d\n", tmp);
> > +			return -EINVAL;
> > +		}
> > +
> > +		ctz->sample_cycle = 1000000 / tmp;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int cv180x_thermal_probe(struct platform_device *pdev)
> > +{
> > +	struct cv180x_thermal_zone *ctz;
> > +	struct thermal_zone_device *tz;
> > +	struct resource *res;
> > +	int ret;
> > +
> > +	ctz = devm_kzalloc(&pdev->dev, sizeof(*ctz), GFP_KERNEL);
> > +	if (!ctz)
> > +		return -ENOMEM;
> > +
> > +	ctz->dev = &pdev->dev;
> > +
> > +	ret = cv180x_parse_dt(ctz);
> > +	if (ret)
> > +		return dev_err_probe(&pdev->dev, ret, "failed to parse dt\n");
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	ctz->base = devm_ioremap_resource(&pdev->dev, res);
> > +	if (IS_ERR(ctz->base))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->base),
> > +				     "failed to map tempsen registers\n");
> > +
> > +	ctz->clk_tempsen = devm_clk_get_enabled(&pdev->dev, NULL);
> > +	if (IS_ERR(ctz->clk_tempsen))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->clk_tempsen),
> > +				     "failed to get clk_tempsen\n");
> > +
> > +	cv180x_thermal_init(ctz);
> > +
> > +	tz = devm_thermal_of_zone_register(&pdev->dev, 0, ctz,
> > +					   &cv180x_thermal_ops);
> > +	if (IS_ERR(tz))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(tz),
> > +				     "failed to register thermal zone\n");
> > +
> > +	platform_set_drvdata(pdev, ctz);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cv180x_thermal_remove(struct platform_device *pdev)
> > +{
> > +	struct cv180x_thermal_zone *ctz = platform_get_drvdata(pdev);
> > +
> > +	cv180x_thermal_deinit(ctz);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused cv180x_thermal_suspend(struct device *dev)
> > +{
> > +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> > +
> > +	cv180x_thermal_deinit(ctz);
> > +	clk_disable_unprepare(ctz->clk_tempsen);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused cv180x_thermal_resume(struct device *dev)
> > +{
> > +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> > +
> > +	clk_prepare_enable(ctz->clk_tempsen);
> > +	cv180x_thermal_init(ctz);
> > +
> > +	return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(cv180x_thermal_pm_ops,
> > +			 cv180x_thermal_suspend, cv180x_thermal_resume);
> > +
> > +static struct platform_driver cv180x_thermal_driver = {
> > +	.probe = cv180x_thermal_probe,
> > +	.remove = cv180x_thermal_remove,
> > +	.driver = {
> > +		.name = "cv180x-thermal",
> > +		.pm = &cv180x_thermal_pm_ops,
> > +		.of_match_table = cv180x_thermal_of_match,
> > +	},
> > +};
> > +
> > +module_platform_driver(cv180x_thermal_driver);
> > +
> > +MODULE_DESCRIPTION("Sophgo CV180x thermal driver");
> > +MODULE_AUTHOR("Haylen Chu <heylenay@outlook.com>");
> > +MODULE_LICENSE("GPL");

Re: [PATCH v4 3/3] thermal: cv180x: Add cv180x thermal driver support

[Inochi Amaoto]

On Tue, Jul 16, 2024 at 09:42:35AM GMT, Haylen Chu wrote:
> Add support for cv180x SoCs integrated thermal sensors.
> 
> Signed-off-by: Haylen Chu <heylenay@outlook.com>
> ---
>  drivers/thermal/Kconfig          |   6 +
>  drivers/thermal/Makefile         |   1 +
>  drivers/thermal/cv180x_thermal.c | 241 +++++++++++++++++++++++++++++++
>  3 files changed, 248 insertions(+)
>  create mode 100644 drivers/thermal/cv180x_thermal.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 204ed89a3ec9..f53c973a361d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -514,4 +514,10 @@ config LOONGSON2_THERMAL
>  	  is higher than the high temperature threshold or lower than the low
>  	  temperature threshold, the interrupt will occur.
>  
> +config CV180X_THERMAL
> +	tristate "Temperature sensor driver for Sophgo CV180X"
> +	help
> +	  If you say yes here you get support for thermal sensor integrated in
> +	  Sophgo CV180X SoCs.
> +
>  endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 5cdf7d68687f..5b59bde8a579 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -65,3 +65,4 @@ obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
>  obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
>  obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
>  obj-$(CONFIG_LOONGSON2_THERMAL)	+= loongson2_thermal.o
> +obj-$(CONFIG_CV180X_THERMAL)	+= cv180x_thermal.o
> diff --git a/drivers/thermal/cv180x_thermal.c b/drivers/thermal/cv180x_thermal.c
> new file mode 100644
> index 000000000000..8b726c0ad848
> --- /dev/null
> +++ b/drivers/thermal/cv180x_thermal.c
> @@ -0,0 +1,241 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Sophgo Inc.
> + * Copyright (C) 2024 Haylen Chu <heylenay@outlook.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +#define TEMPSEN_VERSION					0x0
> +#define TEMPSEN_CTRL					0x4
> +#define  TEMPSEN_CTRL_EN				BIT(0)
> +#define  TEMPSEN_CTRL_SEL_MASK				GENMASK(7, 4)
> +#define  TEMPSEN_CTRL_SEL_OFFSET			4
> +#define TEMPSEN_STATUS					0x8
> +#define TEMPSEN_SET					0xc
> +#define  TEMPSEN_SET_CHOPSEL_MASK			GENMASK(5, 4)
> +#define  TEMPSEN_SET_CHOPSEL_OFFSET			4
> +#define  TEMPSEN_SET_CHOPSEL_128T			0
> +#define  TEMPSEN_SET_CHOPSEL_256T			1
> +#define  TEMPSEN_SET_CHOPSEL_512T			2
> +#define  TEMPSEN_SET_CHOPSEL_1024T			3
> +#define  TEMPSEN_SET_ACCSEL_MASK			GENMASK(7, 6)
> +#define  TEMPSEN_SET_ACCSEL_OFFSET			6
> +#define  TEMPSEN_SET_ACCSEL_512T			0
> +#define  TEMPSEN_SET_ACCSEL_1024T			1
> +#define  TEMPSEN_SET_ACCSEL_2048T			2
> +#define  TEMPSEN_SET_ACCSEL_4096T			3
> +#define  TEMPSEN_SET_CYC_CLKDIV_MASK			GENMASK(15, 8)
> +#define  TEMPSEN_SET_CYC_CLKDIV_OFFSET			8
> +#define TEMPSEN_INTR_EN					0x10
> +#define TEMPSEN_INTR_CLR				0x14
> +#define TEMPSEN_INTR_STA				0x18
> +#define TEMPSEN_INTR_RAW				0x1c
> +#define TEMPSEN_RESULT(n)				(0x20 + (n) * 4)
> +#define  TEMPSEN_RESULT_RESULT_MASK			GENMASK(12, 0)
> +#define  TEMPSEN_RESULT_MAX_RESULT_MASK			GENMASK(28, 16)
> +#define  TEMPSEN_RESULT_CLR_MAX_RESULT			BIT(31)
> +#define TEMPSEN_AUTO_PERIOD				0x64
> +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK		GENMASK(23, 0)
> +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET		0
> +
> +struct cv180x_thermal_zone {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct clk *clk_tempsen;
> +	u32 sample_cycle;
> +};
> +
> +static void cv180x_thermal_init(struct cv180x_thermal_zone *ctz)
> +{
> +	void __iomem *base = ctz->base;
> +	u32 regval;
> +
> +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> +	writel(TEMPSEN_RESULT_CLR_MAX_RESULT, base + TEMPSEN_RESULT(0));
> +
> +	regval = readl(base + TEMPSEN_SET);
> +	regval &= ~TEMPSEN_SET_CHOPSEL_MASK;
> +	regval &= ~TEMPSEN_SET_ACCSEL_MASK;
> +	regval &= ~TEMPSEN_SET_CYC_CLKDIV_MASK;
> +	regval |= TEMPSEN_SET_CHOPSEL_1024T << TEMPSEN_SET_CHOPSEL_OFFSET;
> +	regval |= TEMPSEN_SET_ACCSEL_2048T << TEMPSEN_SET_ACCSEL_OFFSET;
> +	regval |= 0x31 << TEMPSEN_SET_CYC_CLKDIV_OFFSET;
> +	writel(regval, base + TEMPSEN_SET);
> +
> +	regval = readl(base + TEMPSEN_AUTO_PERIOD);
> +	regval &= ~TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK;
> +	regval |= ctz->sample_cycle << TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET;
> +	writel(regval, base + TEMPSEN_AUTO_PERIOD);
> +
> +	regval = readl(base + TEMPSEN_CTRL);
> +	regval &= ~TEMPSEN_CTRL_SEL_MASK;
> +	regval |= 1 << TEMPSEN_CTRL_SEL_OFFSET;
> +	regval |= TEMPSEN_CTRL_EN;
> +	writel(regval, base + TEMPSEN_CTRL);
> +}
> +
> +static void cv180x_thermal_deinit(struct cv180x_thermal_zone *ct)
> +{
> +	void __iomem *base = ct->base;
> +	u32 regval;
> +
> +	regval = readl(base + TEMPSEN_CTRL);
> +	regval &= ~(TEMPSEN_CTRL_SEL_MASK | TEMPSEN_CTRL_EN);
> +	writel(regval, base + TEMPSEN_CTRL);
> +
> +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> +}
> +
> +/*
> + *	Raw register value to temperature (mC) formula:
> + *
> + *		       read_val * 1000 * 716
> + *	Temperature = ----------------------- - 273000
> + *				divider
> + *
> + *	where divider should be ticks number of accumulation period,
> + *	e.g. 2048 for TEMPSEN_CTRL_ACCSEL_2048T
> + */
> +static int cv180x_calc_temp(struct cv180x_thermal_zone *ctz, u32 result)
> +{
> +	return (result * 1000) * 716 / 2048 - 273000;
> +}
> +
> +static int cv180x_get_temp(struct thermal_zone_device *tdev, int *temperature)
> +{
> +	struct cv180x_thermal_zone *ctz = thermal_zone_device_priv(tdev);
> +	void __iomem *base = ctz->base;
> +	u32 result;
> +
> +	result = readl(base + TEMPSEN_RESULT(0)) & TEMPSEN_RESULT_RESULT_MASK;
> +	*temperature = cv180x_calc_temp(ctz, result);
> +
> +	return 0;
> +}
> +
> +static const struct thermal_zone_device_ops cv180x_thermal_ops = {
> +	.get_temp = cv180x_get_temp,
> +};
> +
> +static const struct of_device_id cv180x_thermal_of_match[] = {
> +	{ .compatible = "sophgo,cv1800-thermal" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, cv180x_thermal_of_match);
> +
> +static int
> +cv180x_parse_dt(struct cv180x_thermal_zone *ctz)
> +{
> +	struct device_node *np = ctz->dev->of_node;
> +	u32 tmp;
> +
> +	if (of_property_read_u32(np, "sample-rate-hz", &tmp)) {
> +		ctz->sample_cycle = 1000000;
> +	} else {
> +		/* sample cycle should be at least 524us */
> +		if (tmp > 1000000 / 524) {
> +			dev_err(ctz->dev, "invalid sample rate %d\n", tmp);
> +			return -EINVAL;
> +		}
> +
> +		ctz->sample_cycle = 1000000 / tmp;
> +	}
> +
> +	return 0;
> +}
> +
> +static int cv180x_thermal_probe(struct platform_device *pdev)
> +{
> +	struct cv180x_thermal_zone *ctz;
> +	struct thermal_zone_device *tz;
> +	struct resource *res;
> +	int ret;
> +
> +	ctz = devm_kzalloc(&pdev->dev, sizeof(*ctz), GFP_KERNEL);
> +	if (!ctz)
> +		return -ENOMEM;
> +
> +	ctz->dev = &pdev->dev;
> +
> +	ret = cv180x_parse_dt(ctz);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "failed to parse dt\n");
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	ctz->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(ctz->base))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->base),
> +				     "failed to map tempsen registers\n");
> +
> +	ctz->clk_tempsen = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(ctz->clk_tempsen))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->clk_tempsen),
> +				     "failed to get clk_tempsen\n");
> +
> +	cv180x_thermal_init(ctz);
> +
> +	tz = devm_thermal_of_zone_register(&pdev->dev, 0, ctz,
> +					   &cv180x_thermal_ops);
> +	if (IS_ERR(tz))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(tz),
> +				     "failed to register thermal zone\n");
> +
> +	platform_set_drvdata(pdev, ctz);
> +
> +	return 0;
> +}
> +
> +static int cv180x_thermal_remove(struct platform_device *pdev)
> +{
> +	struct cv180x_thermal_zone *ctz = platform_get_drvdata(pdev);
> +
> +	cv180x_thermal_deinit(ctz);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused cv180x_thermal_suspend(struct device *dev)
> +{
> +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> +
> +	cv180x_thermal_deinit(ctz);
> +	clk_disable_unprepare(ctz->clk_tempsen);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused cv180x_thermal_resume(struct device *dev)
> +{
> +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> +
> +	clk_prepare_enable(ctz->clk_tempsen);
> +	cv180x_thermal_init(ctz);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(cv180x_thermal_pm_ops,
> +			 cv180x_thermal_suspend, cv180x_thermal_resume);
> +
> +static struct platform_driver cv180x_thermal_driver = {
> +	.probe = cv180x_thermal_probe,
> +	.remove = cv180x_thermal_remove,
> +	.driver = {
> +		.name = "cv180x-thermal",
> +		.pm = &cv180x_thermal_pm_ops,
> +		.of_match_table = cv180x_thermal_of_match,
> +	},
> +};
> +
> +module_platform_driver(cv180x_thermal_driver);
> +
> +MODULE_DESCRIPTION("Sophgo CV180x thermal driver");
> +MODULE_AUTHOR("Haylen Chu <heylenay@outlook.com>");
> +MODULE_LICENSE("GPL");
> -- 
> 2.45.2
> 

Where is interrupt handler? I see nothing about it.

Regards,
Inochi

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Krzysztof Kozlowski]

On 17/07/2024 07:19, Haylen Chu wrote:
> On Wed, Jul 17, 2024 at 08:05:10AM +0800, Chen Wang wrote:
>> Haylen, so you want a compatible that matches an actual SoC and use it
>> everywhere?
>>
>> Or we can add ones for each SoC and have a fallback to cv1800.
> 
> I would prefer "sophgo,cv1800-thermal" and use it everywhere. I don't
> see any difference on thermal sensors between cv18xx-series SoCs.

Please use proper fallbacks - there is a very specific rule, repeated
many times:

https://elixir.bootlin.com/linux/v6.10-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42

Best regards,
Krzysztof

Re: [PATCH v4 3/3] thermal: cv180x: Add cv180x thermal driver support

[Haylen Chu]

On Wed, Jul 17, 2024 at 02:22:32PM +0800, Inochi Amaoto wrote:
> On Tue, Jul 16, 2024 at 09:42:35AM GMT, Haylen Chu wrote:
> > Add support for cv180x SoCs integrated thermal sensors.
> > 
> > Signed-off-by: Haylen Chu <heylenay@outlook.com>
> > ---
> >  drivers/thermal/Kconfig          |   6 +
> >  drivers/thermal/Makefile         |   1 +
> >  drivers/thermal/cv180x_thermal.c | 241 +++++++++++++++++++++++++++++++
> >  3 files changed, 248 insertions(+)
> >  create mode 100644 drivers/thermal/cv180x_thermal.c
> > 
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 204ed89a3ec9..f53c973a361d 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -514,4 +514,10 @@ config LOONGSON2_THERMAL
> >  	  is higher than the high temperature threshold or lower than the low
> >  	  temperature threshold, the interrupt will occur.
> >  
> > +config CV180X_THERMAL
> > +	tristate "Temperature sensor driver for Sophgo CV180X"
> > +	help
> > +	  If you say yes here you get support for thermal sensor integrated in
> > +	  Sophgo CV180X SoCs.
> > +
> >  endif
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index 5cdf7d68687f..5b59bde8a579 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -65,3 +65,4 @@ obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> >  obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
> >  obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
> >  obj-$(CONFIG_LOONGSON2_THERMAL)	+= loongson2_thermal.o
> > +obj-$(CONFIG_CV180X_THERMAL)	+= cv180x_thermal.o
> > diff --git a/drivers/thermal/cv180x_thermal.c b/drivers/thermal/cv180x_thermal.c
> > new file mode 100644
> > index 000000000000..8b726c0ad848
> > --- /dev/null
> > +++ b/drivers/thermal/cv180x_thermal.c
> > @@ -0,0 +1,241 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Sophgo Inc.
> > + * Copyright (C) 2024 Haylen Chu <heylenay@outlook.com>
> > + */
> > +
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/thermal.h>
> > +
> > +#define TEMPSEN_VERSION					0x0
> > +#define TEMPSEN_CTRL					0x4
> > +#define  TEMPSEN_CTRL_EN				BIT(0)
> > +#define  TEMPSEN_CTRL_SEL_MASK				GENMASK(7, 4)
> > +#define  TEMPSEN_CTRL_SEL_OFFSET			4
> > +#define TEMPSEN_STATUS					0x8
> > +#define TEMPSEN_SET					0xc
> > +#define  TEMPSEN_SET_CHOPSEL_MASK			GENMASK(5, 4)
> > +#define  TEMPSEN_SET_CHOPSEL_OFFSET			4
> > +#define  TEMPSEN_SET_CHOPSEL_128T			0
> > +#define  TEMPSEN_SET_CHOPSEL_256T			1
> > +#define  TEMPSEN_SET_CHOPSEL_512T			2
> > +#define  TEMPSEN_SET_CHOPSEL_1024T			3
> > +#define  TEMPSEN_SET_ACCSEL_MASK			GENMASK(7, 6)
> > +#define  TEMPSEN_SET_ACCSEL_OFFSET			6
> > +#define  TEMPSEN_SET_ACCSEL_512T			0
> > +#define  TEMPSEN_SET_ACCSEL_1024T			1
> > +#define  TEMPSEN_SET_ACCSEL_2048T			2
> > +#define  TEMPSEN_SET_ACCSEL_4096T			3
> > +#define  TEMPSEN_SET_CYC_CLKDIV_MASK			GENMASK(15, 8)
> > +#define  TEMPSEN_SET_CYC_CLKDIV_OFFSET			8
> > +#define TEMPSEN_INTR_EN					0x10
> > +#define TEMPSEN_INTR_CLR				0x14
> > +#define TEMPSEN_INTR_STA				0x18
> > +#define TEMPSEN_INTR_RAW				0x1c
> > +#define TEMPSEN_RESULT(n)				(0x20 + (n) * 4)
> > +#define  TEMPSEN_RESULT_RESULT_MASK			GENMASK(12, 0)
> > +#define  TEMPSEN_RESULT_MAX_RESULT_MASK			GENMASK(28, 16)
> > +#define  TEMPSEN_RESULT_CLR_MAX_RESULT			BIT(31)
> > +#define TEMPSEN_AUTO_PERIOD				0x64
> > +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK		GENMASK(23, 0)
> > +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET		0
> > +
> > +struct cv180x_thermal_zone {
> > +	struct device *dev;
> > +	void __iomem *base;
> > +	struct clk *clk_tempsen;
> > +	u32 sample_cycle;
> > +};
> > +
> > +static void cv180x_thermal_init(struct cv180x_thermal_zone *ctz)
> > +{
> > +	void __iomem *base = ctz->base;
> > +	u32 regval;
> > +
> > +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> > +	writel(TEMPSEN_RESULT_CLR_MAX_RESULT, base + TEMPSEN_RESULT(0));
> > +
> > +	regval = readl(base + TEMPSEN_SET);
> > +	regval &= ~TEMPSEN_SET_CHOPSEL_MASK;
> > +	regval &= ~TEMPSEN_SET_ACCSEL_MASK;
> > +	regval &= ~TEMPSEN_SET_CYC_CLKDIV_MASK;
> > +	regval |= TEMPSEN_SET_CHOPSEL_1024T << TEMPSEN_SET_CHOPSEL_OFFSET;
> > +	regval |= TEMPSEN_SET_ACCSEL_2048T << TEMPSEN_SET_ACCSEL_OFFSET;
> > +	regval |= 0x31 << TEMPSEN_SET_CYC_CLKDIV_OFFSET;
> > +	writel(regval, base + TEMPSEN_SET);
> > +
> > +	regval = readl(base + TEMPSEN_AUTO_PERIOD);
> > +	regval &= ~TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK;
> > +	regval |= ctz->sample_cycle << TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET;
> > +	writel(regval, base + TEMPSEN_AUTO_PERIOD);
> > +
> > +	regval = readl(base + TEMPSEN_CTRL);
> > +	regval &= ~TEMPSEN_CTRL_SEL_MASK;
> > +	regval |= 1 << TEMPSEN_CTRL_SEL_OFFSET;
> > +	regval |= TEMPSEN_CTRL_EN;
> > +	writel(regval, base + TEMPSEN_CTRL);
> > +}
> > +
> > +static void cv180x_thermal_deinit(struct cv180x_thermal_zone *ct)
> > +{
> > +	void __iomem *base = ct->base;
> > +	u32 regval;
> > +
> > +	regval = readl(base + TEMPSEN_CTRL);
> > +	regval &= ~(TEMPSEN_CTRL_SEL_MASK | TEMPSEN_CTRL_EN);
> > +	writel(regval, base + TEMPSEN_CTRL);
> > +
> > +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> > +}
> > +
> > +/*
> > + *	Raw register value to temperature (mC) formula:
> > + *
> > + *		       read_val * 1000 * 716
> > + *	Temperature = ----------------------- - 273000
> > + *				divider
> > + *
> > + *	where divider should be ticks number of accumulation period,
> > + *	e.g. 2048 for TEMPSEN_CTRL_ACCSEL_2048T
> > + */
> > +static int cv180x_calc_temp(struct cv180x_thermal_zone *ctz, u32 result)
> > +{
> > +	return (result * 1000) * 716 / 2048 - 273000;
> > +}
> > +
> > +static int cv180x_get_temp(struct thermal_zone_device *tdev, int *temperature)
> > +{
> > +	struct cv180x_thermal_zone *ctz = thermal_zone_device_priv(tdev);
> > +	void __iomem *base = ctz->base;
> > +	u32 result;
> > +
> > +	result = readl(base + TEMPSEN_RESULT(0)) & TEMPSEN_RESULT_RESULT_MASK;
> > +	*temperature = cv180x_calc_temp(ctz, result);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct thermal_zone_device_ops cv180x_thermal_ops = {
> > +	.get_temp = cv180x_get_temp,
> > +};
> > +
> > +static const struct of_device_id cv180x_thermal_of_match[] = {
> > +	{ .compatible = "sophgo,cv1800-thermal" },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, cv180x_thermal_of_match);
> > +
> > +static int
> > +cv180x_parse_dt(struct cv180x_thermal_zone *ctz)
> > +{
> > +	struct device_node *np = ctz->dev->of_node;
> > +	u32 tmp;
> > +
> > +	if (of_property_read_u32(np, "sample-rate-hz", &tmp)) {
> > +		ctz->sample_cycle = 1000000;
> > +	} else {
> > +		/* sample cycle should be at least 524us */
> > +		if (tmp > 1000000 / 524) {
> > +			dev_err(ctz->dev, "invalid sample rate %d\n", tmp);
> > +			return -EINVAL;
> > +		}
> > +
> > +		ctz->sample_cycle = 1000000 / tmp;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int cv180x_thermal_probe(struct platform_device *pdev)
> > +{
> > +	struct cv180x_thermal_zone *ctz;
> > +	struct thermal_zone_device *tz;
> > +	struct resource *res;
> > +	int ret;
> > +
> > +	ctz = devm_kzalloc(&pdev->dev, sizeof(*ctz), GFP_KERNEL);
> > +	if (!ctz)
> > +		return -ENOMEM;
> > +
> > +	ctz->dev = &pdev->dev;
> > +
> > +	ret = cv180x_parse_dt(ctz);
> > +	if (ret)
> > +		return dev_err_probe(&pdev->dev, ret, "failed to parse dt\n");
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	ctz->base = devm_ioremap_resource(&pdev->dev, res);
> > +	if (IS_ERR(ctz->base))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->base),
> > +				     "failed to map tempsen registers\n");
> > +
> > +	ctz->clk_tempsen = devm_clk_get_enabled(&pdev->dev, NULL);
> > +	if (IS_ERR(ctz->clk_tempsen))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->clk_tempsen),
> > +				     "failed to get clk_tempsen\n");
> > +
> > +	cv180x_thermal_init(ctz);
> > +
> > +	tz = devm_thermal_of_zone_register(&pdev->dev, 0, ctz,
> > +					   &cv180x_thermal_ops);
> > +	if (IS_ERR(tz))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(tz),
> > +				     "failed to register thermal zone\n");
> > +
> > +	platform_set_drvdata(pdev, ctz);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cv180x_thermal_remove(struct platform_device *pdev)
> > +{
> > +	struct cv180x_thermal_zone *ctz = platform_get_drvdata(pdev);
> > +
> > +	cv180x_thermal_deinit(ctz);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused cv180x_thermal_suspend(struct device *dev)
> > +{
> > +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> > +
> > +	cv180x_thermal_deinit(ctz);
> > +	clk_disable_unprepare(ctz->clk_tempsen);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused cv180x_thermal_resume(struct device *dev)
> > +{
> > +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> > +
> > +	clk_prepare_enable(ctz->clk_tempsen);
> > +	cv180x_thermal_init(ctz);
> > +
> > +	return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(cv180x_thermal_pm_ops,
> > +			 cv180x_thermal_suspend, cv180x_thermal_resume);
> > +
> > +static struct platform_driver cv180x_thermal_driver = {
> > +	.probe = cv180x_thermal_probe,
> > +	.remove = cv180x_thermal_remove,
> > +	.driver = {
> > +		.name = "cv180x-thermal",
> > +		.pm = &cv180x_thermal_pm_ops,
> > +		.of_match_table = cv180x_thermal_of_match,
> > +	},
> > +};
> > +
> > +module_platform_driver(cv180x_thermal_driver);
> > +
> > +MODULE_DESCRIPTION("Sophgo CV180x thermal driver");
> > +MODULE_AUTHOR("Haylen Chu <heylenay@outlook.com>");
> > +MODULE_LICENSE("GPL");
> > -- 
> > 2.45.2
> > 
> 
> Where is interrupt handler? I see nothing about it.
> 
> Regards,
> Inochi

Interrupts are not used. This driver implements only polling the
temperature.

Best regards,
Haylen Chu

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Haylen Chu]

On Wed, Jul 17, 2024 at 11:12:52AM +0200, Krzysztof Kozlowski wrote:
> On 17/07/2024 07:19, Haylen Chu wrote:
> > On Wed, Jul 17, 2024 at 08:05:10AM +0800, Chen Wang wrote:
> >> Haylen, so you want a compatible that matches an actual SoC and use it
> >> everywhere?
> >>
> >> Or we can add ones for each SoC and have a fallback to cv1800.
> > 
> > I would prefer "sophgo,cv1800-thermal" and use it everywhere. I don't
> > see any difference on thermal sensors between cv18xx-series SoCs.
> 
> Please use proper fallbacks - there is a very specific rule, repeated
> many times:
> 
> https://elixir.bootlin.com/linux/v6.10-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42

Just in case I misunderstood,

You would prefer different SoC-specific compatible strings like
"sophgo,cv1800-thermal" "sophgo,sg2002-thermal" added to the driver,
and each thermal-sensor node contains two compatible strings, one
matches the SoC exactly and one is "sophgo,cv1800-thermal" just as a
fallback, right?

Best regards,
Haylen Chu

Re: [PATCH v4 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Krzysztof Kozlowski]

On 18/07/2024 09:04, Haylen Chu wrote:
> On Wed, Jul 17, 2024 at 11:12:52AM +0200, Krzysztof Kozlowski wrote:
>> On 17/07/2024 07:19, Haylen Chu wrote:
>>> On Wed, Jul 17, 2024 at 08:05:10AM +0800, Chen Wang wrote:
>>>> Haylen, so you want a compatible that matches an actual SoC and use it
>>>> everywhere?
>>>>
>>>> Or we can add ones for each SoC and have a fallback to cv1800.
>>>
>>> I would prefer "sophgo,cv1800-thermal" and use it everywhere. I don't
>>> see any difference on thermal sensors between cv18xx-series SoCs.
>>
>> Please use proper fallbacks - there is a very specific rule, repeated
>> many times:
>>
>> https://elixir.bootlin.com/linux/v6.10-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42
> 
> Just in case I misunderstood,
> 
> You would prefer different SoC-specific compatible strings like
> "sophgo,cv1800-thermal" "sophgo,sg2002-thermal" added to the driver,

There is nothing in above - comment or guideline - mentioning drivers.

> and each thermal-sensor node contains two compatible strings, one
> matches the SoC exactly and one is "sophgo,cv1800-thermal" just as a
> fallback, right?



Best regards,
Krzysztof

Re: [PATCH v4 3/3] thermal: cv180x: Add cv180x thermal driver support

[Inochi Amaoto]

On Thu, Jul 18, 2024 at 06:49:05AM GMT, Haylen Chu wrote:
> On Wed, Jul 17, 2024 at 02:22:32PM +0800, Inochi Amaoto wrote:
> > On Tue, Jul 16, 2024 at 09:42:35AM GMT, Haylen Chu wrote:
> > > Add support for cv180x SoCs integrated thermal sensors.
> > > 
> > > Signed-off-by: Haylen Chu <heylenay@outlook.com>
> > > ---
> > >  drivers/thermal/Kconfig          |   6 +
> > >  drivers/thermal/Makefile         |   1 +
> > >  drivers/thermal/cv180x_thermal.c | 241 +++++++++++++++++++++++++++++++
> > >  3 files changed, 248 insertions(+)
> > >  create mode 100644 drivers/thermal/cv180x_thermal.c
> > > 
> > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > > index 204ed89a3ec9..f53c973a361d 100644
> > > --- a/drivers/thermal/Kconfig
> > > +++ b/drivers/thermal/Kconfig
> > > @@ -514,4 +514,10 @@ config LOONGSON2_THERMAL
> > >  	  is higher than the high temperature threshold or lower than the low
> > >  	  temperature threshold, the interrupt will occur.
> > >  
> > > +config CV180X_THERMAL
> > > +	tristate "Temperature sensor driver for Sophgo CV180X"
> > > +	help
> > > +	  If you say yes here you get support for thermal sensor integrated in
> > > +	  Sophgo CV180X SoCs.
> > > +
> > >  endif
> > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > > index 5cdf7d68687f..5b59bde8a579 100644
> > > --- a/drivers/thermal/Makefile
> > > +++ b/drivers/thermal/Makefile
> > > @@ -65,3 +65,4 @@ obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> > >  obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
> > >  obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
> > >  obj-$(CONFIG_LOONGSON2_THERMAL)	+= loongson2_thermal.o
> > > +obj-$(CONFIG_CV180X_THERMAL)	+= cv180x_thermal.o
> > > diff --git a/drivers/thermal/cv180x_thermal.c b/drivers/thermal/cv180x_thermal.c
> > > new file mode 100644
> > > index 000000000000..8b726c0ad848
> > > --- /dev/null
> > > +++ b/drivers/thermal/cv180x_thermal.c
> > > @@ -0,0 +1,241 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (C) 2021 Sophgo Inc.
> > > + * Copyright (C) 2024 Haylen Chu <heylenay@outlook.com>
> > > + */
> > > +
> > > +#include <linux/bits.h>
> > > +#include <linux/clk.h>
> > > +#include <linux/io.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/thermal.h>
> > > +
> > > +#define TEMPSEN_VERSION					0x0
> > > +#define TEMPSEN_CTRL					0x4
> > > +#define  TEMPSEN_CTRL_EN				BIT(0)
> > > +#define  TEMPSEN_CTRL_SEL_MASK				GENMASK(7, 4)
> > > +#define  TEMPSEN_CTRL_SEL_OFFSET			4
> > > +#define TEMPSEN_STATUS					0x8
> > > +#define TEMPSEN_SET					0xc
> > > +#define  TEMPSEN_SET_CHOPSEL_MASK			GENMASK(5, 4)
> > > +#define  TEMPSEN_SET_CHOPSEL_OFFSET			4
> > > +#define  TEMPSEN_SET_CHOPSEL_128T			0
> > > +#define  TEMPSEN_SET_CHOPSEL_256T			1
> > > +#define  TEMPSEN_SET_CHOPSEL_512T			2
> > > +#define  TEMPSEN_SET_CHOPSEL_1024T			3
> > > +#define  TEMPSEN_SET_ACCSEL_MASK			GENMASK(7, 6)
> > > +#define  TEMPSEN_SET_ACCSEL_OFFSET			6
> > > +#define  TEMPSEN_SET_ACCSEL_512T			0
> > > +#define  TEMPSEN_SET_ACCSEL_1024T			1
> > > +#define  TEMPSEN_SET_ACCSEL_2048T			2
> > > +#define  TEMPSEN_SET_ACCSEL_4096T			3
> > > +#define  TEMPSEN_SET_CYC_CLKDIV_MASK			GENMASK(15, 8)
> > > +#define  TEMPSEN_SET_CYC_CLKDIV_OFFSET			8
> > > +#define TEMPSEN_INTR_EN					0x10
> > > +#define TEMPSEN_INTR_CLR				0x14
> > > +#define TEMPSEN_INTR_STA				0x18
> > > +#define TEMPSEN_INTR_RAW				0x1c
> > > +#define TEMPSEN_RESULT(n)				(0x20 + (n) * 4)
> > > +#define  TEMPSEN_RESULT_RESULT_MASK			GENMASK(12, 0)
> > > +#define  TEMPSEN_RESULT_MAX_RESULT_MASK			GENMASK(28, 16)
> > > +#define  TEMPSEN_RESULT_CLR_MAX_RESULT			BIT(31)
> > > +#define TEMPSEN_AUTO_PERIOD				0x64
> > > +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK		GENMASK(23, 0)
> > > +#define  TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET		0
> > > +
> > > +struct cv180x_thermal_zone {
> > > +	struct device *dev;
> > > +	void __iomem *base;
> > > +	struct clk *clk_tempsen;
> > > +	u32 sample_cycle;
> > > +};
> > > +
> > > +static void cv180x_thermal_init(struct cv180x_thermal_zone *ctz)
> > > +{
> > > +	void __iomem *base = ctz->base;
> > > +	u32 regval;
> > > +
> > > +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> > > +	writel(TEMPSEN_RESULT_CLR_MAX_RESULT, base + TEMPSEN_RESULT(0));
> > > +
> > > +	regval = readl(base + TEMPSEN_SET);
> > > +	regval &= ~TEMPSEN_SET_CHOPSEL_MASK;
> > > +	regval &= ~TEMPSEN_SET_ACCSEL_MASK;
> > > +	regval &= ~TEMPSEN_SET_CYC_CLKDIV_MASK;
> > > +	regval |= TEMPSEN_SET_CHOPSEL_1024T << TEMPSEN_SET_CHOPSEL_OFFSET;
> > > +	regval |= TEMPSEN_SET_ACCSEL_2048T << TEMPSEN_SET_ACCSEL_OFFSET;
> > > +	regval |= 0x31 << TEMPSEN_SET_CYC_CLKDIV_OFFSET;
> > > +	writel(regval, base + TEMPSEN_SET);
> > > +
> > > +	regval = readl(base + TEMPSEN_AUTO_PERIOD);
> > > +	regval &= ~TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_MASK;
> > > +	regval |= ctz->sample_cycle << TEMPSEN_AUTO_PERIOD_AUTO_CYCLE_OFFSET;
> > > +	writel(regval, base + TEMPSEN_AUTO_PERIOD);
> > > +
> > > +	regval = readl(base + TEMPSEN_CTRL);
> > > +	regval &= ~TEMPSEN_CTRL_SEL_MASK;
> > > +	regval |= 1 << TEMPSEN_CTRL_SEL_OFFSET;
> > > +	regval |= TEMPSEN_CTRL_EN;
> > > +	writel(regval, base + TEMPSEN_CTRL);
> > > +}
> > > +
> > > +static void cv180x_thermal_deinit(struct cv180x_thermal_zone *ct)
> > > +{
> > > +	void __iomem *base = ct->base;
> > > +	u32 regval;
> > > +
> > > +	regval = readl(base + TEMPSEN_CTRL);
> > > +	regval &= ~(TEMPSEN_CTRL_SEL_MASK | TEMPSEN_CTRL_EN);
> > > +	writel(regval, base + TEMPSEN_CTRL);
> > > +
> > > +	writel(readl(base + TEMPSEN_INTR_RAW), base + TEMPSEN_INTR_CLR);
> > > +}
> > > +
> > > +/*
> > > + *	Raw register value to temperature (mC) formula:
> > > + *
> > > + *		       read_val * 1000 * 716
> > > + *	Temperature = ----------------------- - 273000
> > > + *				divider
> > > + *
> > > + *	where divider should be ticks number of accumulation period,
> > > + *	e.g. 2048 for TEMPSEN_CTRL_ACCSEL_2048T
> > > + */
> > > +static int cv180x_calc_temp(struct cv180x_thermal_zone *ctz, u32 result)
> > > +{
> > > +	return (result * 1000) * 716 / 2048 - 273000;
> > > +}
> > > +
> > > +static int cv180x_get_temp(struct thermal_zone_device *tdev, int *temperature)
> > > +{
> > > +	struct cv180x_thermal_zone *ctz = thermal_zone_device_priv(tdev);
> > > +	void __iomem *base = ctz->base;
> > > +	u32 result;
> > > +
> > > +	result = readl(base + TEMPSEN_RESULT(0)) & TEMPSEN_RESULT_RESULT_MASK;
> > > +	*temperature = cv180x_calc_temp(ctz, result);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct thermal_zone_device_ops cv180x_thermal_ops = {
> > > +	.get_temp = cv180x_get_temp,
> > > +};
> > > +
> > > +static const struct of_device_id cv180x_thermal_of_match[] = {
> > > +	{ .compatible = "sophgo,cv1800-thermal" },
> > > +	{},
> > > +};
> > > +MODULE_DEVICE_TABLE(of, cv180x_thermal_of_match);
> > > +
> > > +static int
> > > +cv180x_parse_dt(struct cv180x_thermal_zone *ctz)
> > > +{
> > > +	struct device_node *np = ctz->dev->of_node;
> > > +	u32 tmp;
> > > +
> > > +	if (of_property_read_u32(np, "sample-rate-hz", &tmp)) {
> > > +		ctz->sample_cycle = 1000000;
> > > +	} else {
> > > +		/* sample cycle should be at least 524us */
> > > +		if (tmp > 1000000 / 524) {
> > > +			dev_err(ctz->dev, "invalid sample rate %d\n", tmp);
> > > +			return -EINVAL;
> > > +		}
> > > +
> > > +		ctz->sample_cycle = 1000000 / tmp;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int cv180x_thermal_probe(struct platform_device *pdev)
> > > +{
> > > +	struct cv180x_thermal_zone *ctz;
> > > +	struct thermal_zone_device *tz;
> > > +	struct resource *res;
> > > +	int ret;
> > > +
> > > +	ctz = devm_kzalloc(&pdev->dev, sizeof(*ctz), GFP_KERNEL);
> > > +	if (!ctz)
> > > +		return -ENOMEM;
> > > +
> > > +	ctz->dev = &pdev->dev;
> > > +
> > > +	ret = cv180x_parse_dt(ctz);
> > > +	if (ret)
> > > +		return dev_err_probe(&pdev->dev, ret, "failed to parse dt\n");
> > > +
> > > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > +	ctz->base = devm_ioremap_resource(&pdev->dev, res);
> > > +	if (IS_ERR(ctz->base))
> > > +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->base),
> > > +				     "failed to map tempsen registers\n");
> > > +
> > > +	ctz->clk_tempsen = devm_clk_get_enabled(&pdev->dev, NULL);
> > > +	if (IS_ERR(ctz->clk_tempsen))
> > > +		return dev_err_probe(&pdev->dev, PTR_ERR(ctz->clk_tempsen),
> > > +				     "failed to get clk_tempsen\n");
> > > +
> > > +	cv180x_thermal_init(ctz);
> > > +
> > > +	tz = devm_thermal_of_zone_register(&pdev->dev, 0, ctz,
> > > +					   &cv180x_thermal_ops);
> > > +	if (IS_ERR(tz))
> > > +		return dev_err_probe(&pdev->dev, PTR_ERR(tz),
> > > +				     "failed to register thermal zone\n");
> > > +
> > > +	platform_set_drvdata(pdev, ctz);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int cv180x_thermal_remove(struct platform_device *pdev)
> > > +{
> > > +	struct cv180x_thermal_zone *ctz = platform_get_drvdata(pdev);
> > > +
> > > +	cv180x_thermal_deinit(ctz);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int __maybe_unused cv180x_thermal_suspend(struct device *dev)
> > > +{
> > > +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> > > +
> > > +	cv180x_thermal_deinit(ctz);
> > > +	clk_disable_unprepare(ctz->clk_tempsen);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int __maybe_unused cv180x_thermal_resume(struct device *dev)
> > > +{
> > > +	struct cv180x_thermal_zone *ctz = dev_get_drvdata(dev);
> > > +
> > > +	clk_prepare_enable(ctz->clk_tempsen);
> > > +	cv180x_thermal_init(ctz);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static SIMPLE_DEV_PM_OPS(cv180x_thermal_pm_ops,
> > > +			 cv180x_thermal_suspend, cv180x_thermal_resume);
> > > +
> > > +static struct platform_driver cv180x_thermal_driver = {
> > > +	.probe = cv180x_thermal_probe,
> > > +	.remove = cv180x_thermal_remove,
> > > +	.driver = {
> > > +		.name = "cv180x-thermal",
> > > +		.pm = &cv180x_thermal_pm_ops,
> > > +		.of_match_table = cv180x_thermal_of_match,
> > > +	},
> > > +};
> > > +
> > > +module_platform_driver(cv180x_thermal_driver);
> > > +
> > > +MODULE_DESCRIPTION("Sophgo CV180x thermal driver");
> > > +MODULE_AUTHOR("Haylen Chu <heylenay@outlook.com>");
> > > +MODULE_LICENSE("GPL");
> > > -- 
> > > 2.45.2
> > > 
> > 
> > Where is interrupt handler? I see nothing about it.
> > 
> > Regards,
> > Inochi
> 
> Interrupts are not used. This driver implements only polling the
> temperature.
> 
> Best regards,
> Haylen Chu

"xxx is not used" is not the reason for you to not implement it.
In addition, interrupt-driven is not just for reading sensors. I
have seen something important like critical alert. Drop interrupt
support may miss these alert.
If you do not want to implement this, move your driver to staging 
as it is not complete.

Regard,
Inochi