[PATCH v6 0/3] pmic on imx8mm

[PATCH v6 0/3] pmic on imx8mm

[Johannes Schneider]

current(?) imx8mm EVKs come with a different PMIC: used to be
"rohm,bd71847", which is now replaced by "nxp,pca9450a" on the LPDDR4
variant at least the register settings etc where "backported" from
current u-boot sources for the EVK

Note: not sure if the changes should go in the ddr4-evk.dts or elsewhere;
what about backwards compatibility? = users/holders of the EVKs with the bd71847 IC?

changes with V6:
	move A53 cpu-supply nodes back into imx8mm-evk.dtsi
	rewording of commit messages
	fix syntax error during compile

changes with V5:
	split of bindings into separate commit
	rewording of commit messages

changes with V4:
	deduplicate rohm-pmic into one dtsi 

changes with V3:
	split changes into multiple commits
	removed unused header

changes with V2:
	reshuffle common nodes into the imx8mm-evk.dtsi, and only keeping the pmic related parts separate

Johannes Schneider (1):
  arm64: dts: imx8mm: set PCA9450a as PMIC

 .../boot/dts/freescale/imx8mm-ddr4-evk.dts    | 124 ++++++++++++++++++
 1 file changed, 124 insertions(+)

-- 
2.25.1

[PATCH v6 1/3] arm64: dts: imx8mm-evk: move PMIC configuration

[Johannes Schneider]

Move the PMIC configuration out of imx8mm-evk.dtsi into a separate
file; to accommodate devicetrees for the rev-b EVK, which comes with a
different PMIC.

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
---
 .../boot/dts/freescale/imx8mm-ddr4-evk.dts    |   1 +
 .../dts/freescale/imx8mm-evk-rohm-pmic.dtsi   | 118 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mm-evk.dts  |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 112 -----------------
 4 files changed, 120 insertions(+), 112 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
index 6c079c0a3a48..f39182ce65b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "imx8mm-evk.dtsi"
+#include "imx8mm-evk-rohm-pmic.dtsi"
 
 / {
 	model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
new file mode 100644
index 000000000000..0b056996a27b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk-rohm-pmic.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+&i2c1 {
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index a2b24d4d4e3e..d2b6d7de7e53 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/usb/pd.h>
 #include "imx8mm-evk.dtsi"
+#include "imx8mm-evk-rohm-pmic.dtsi"
 
 / {
 	model = "FSL i.MX8MM EVK board";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 7d6317d95b13..21d0614af44c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -182,118 +182,6 @@ &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
-
-	pmic@4b {
-		compatible = "rohm,bd71847";
-		reg = <0x4b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		rohm,reset-snvs-powered;
-
-		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
-		clock-output-names = "clk-32k-out";
-
-		regulators {
-			buck1_reg: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
-			};
-
-			buck3_reg: BUCK3 {
-				// BUCK5 in datasheet
-				regulator-name = "buck3";
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				// BUCK6 in datasheet
-				regulator-name = "buck4";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				// BUCK7 in datasheet
-				regulator-name = "buck5";
-				regulator-min-microvolt = <1605000>;
-				regulator-max-microvolt = <1995000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				// BUCK8 in datasheet
-				regulator-name = "buck6";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: LDO1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "ldo6";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
 };
 
 &i2c2 {
-- 
2.25.1

[PATCH v6 2/3] arm64: dts: imx8mm-evk: add revision-B EVK

[Johannes Schneider]

Add devicetree for the EVKB, which comes with LPDDR4 and a different
PMIC.

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 116 ++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 000000000000..b2d724ad43b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB"; // with LPDDR4 and PCA9450 PMIC
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <820000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
-- 
2.25.1

Re: [PATCH v6 2/3] arm64: dts: imx8mm-evk: add revision-B EVK

[Ahmad Fatoum]

On 10.01.23 12:40, Johannes Schneider wrote:
> Add devicetree for the EVKB, which comes with LPDDR4 and a different
> PMIC.
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>

As mentioned by Krzysztof, Makefile change is missing.
Also, please give reviewers some extra time to react to new
revisions before resending.

Cheers,
Ahmad

> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> new file mode 100644
> index 000000000000..b2d724ad43b2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019-2020 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-evk.dtsi"
> +
> +/ {
> +	model = "FSL i.MX8MM EVKB"; // with LPDDR4 and PCA9450 PMIC
> +	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
> +};
> +
> +&i2c1 {
> +	pmic: pmic@25 {
> +		compatible = "nxp,pca9450a";
> +		reg = <0x25>;
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		pinctrl-names = "default";
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +		regulators {
> +			buck1_reg: BUCK1 {
> +				regulator-name = "BUCK1";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +				nxp,dvs-run-voltage = <820000>;
> +				nxp,dvs-standby-voltage = <800000>;
> +			};
> +
> +			buck2_reg: BUCK2 {
> +				regulator-name = "BUCK2";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			buck3_reg: BUCK3 {
> +				regulator-name = "BUCK3";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck4_reg: BUCK4 {
> +				regulator-name = "BUCK4";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck5_reg: BUCK5 {
> +				regulator-name = "BUCK5";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck6_reg: BUCK6 {
> +				regulator-name = "BUCK6";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1_reg: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo2_reg: LDO2 {
> +				regulator-name = "LDO2";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1150000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo3_reg: LDO3 {
> +				regulator-name = "LDO3";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo4_reg: LDO4 {
> +				regulator-name = "LDO4";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo5_reg: LDO5 {
> +				regulator-name = "LDO5";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +		};
> +	};
> +};

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH v6 2/3] arm64: dts: imx8mm-evk: add revision-B EVK

[Krzysztof Kozlowski]

On 10/01/2023 12:40, Johannes Schneider wrote:
> Add devicetree for the EVKB, which comes with LPDDR4 and a different
> PMIC.
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 116 ++++++++++++++++++


This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

So for the third time: where is the makefile change? How can you build
it otherwise?


Best regards,
Krzysztof

[PATCH v6 3/3] dt-bindings: arm: fsl: Add i.MX8MM-EVK rev-b

[Johannes Schneider]

Add DT compatible strings for a rev-b imx8mm-EVK which come with a
different PMIC than rev-a.

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index fbfc4f99c01e..9c3a02c19847 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -818,6 +818,7 @@ properties:
               - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVK Board, rev-B
               - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
-- 
2.25.1

Re: [PATCH v6 3/3] dt-bindings: arm: fsl: Add i.MX8MM-EVK rev-b

[Ahmad Fatoum]

Hi,

On 10.01.23 12:40, Johannes Schneider wrote:
> Add DT compatible strings for a rev-b imx8mm-EVK which come with a
> different PMIC than rev-a.
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>

Please manually include Acked-by and Reviewed-by's you get when sending
a new revision. It's not necessary to send a new version when there
are no other changes. In that case the maintainer scripts will usually
pick up the tags and fold it into the patch description, but they
won't usually go looking in old mailing list postings to collect Acks
as that would also involve them judging whether changes in the new
series are extensive enough to invalidate previous reviews/testing.

Cheers,
Ahmad

> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index fbfc4f99c01e..9c3a02c19847 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -818,6 +818,7 @@ properties:
>                - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
>                - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
>                - fsl,imx8mm-evk            # i.MX8MM EVK Board
> +              - fsl,imx8mm-evkb           # i.MX8MM EVK Board, rev-B
>                - gateworks,imx8mm-gw7904
>                - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
>                - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH v6 3/3] dt-bindings: arm: fsl: Add i.MX8MM-EVK rev-b

[Krzysztof Kozlowski]

On 10/01/2023 12:40, Johannes Schneider wrote:
> Add DT compatible strings for a rev-b imx8mm-EVK which come with a
> different PMIC than rev-a.
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>

This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions. However, there's no need to repost patches *only* to add the
tags. The upstream maintainer will do that for acks received on the
version they apply.

https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540

If a tag was not added on purpose, please state why and what changed.

Krzysztof