Re: [PATCH v9 0/5] thermal: mediatek: Add support for MT8365 SoC

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 27/01/2023 16:44, Amjad Ouled-Ameur wrote:
> This patchset adds thermal support for MT8365 SoC.
> 
> MT8365 has 4 thermal sensors, one for CPUs and the rest for debug/dev
> purposes. The CPU thermal zone uses passive cooling device with
> CPU{0..3}.
> 
> Changes in v9:
> - Use delay between bank init and the thermal zone device register.
> - Link to v8: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v8-0-23e8fbb08837@baylibre.com
> 
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> ---
> Amjad Ouled-Ameur (2):
>        thermal: mediatek: add callback for raw to mcelsius conversion
>        thermal: mediatek: add delay after thermal banks initialization
> 
> Fabien Parent (2):
>        dt-bindings: thermal: mediatek: add binding documentation for MT8365 SoC
>        thermal: mediatek: add support for MT8365 SoC
> 
> Markus Schneider-Pargmann (1):
>        thermal: mediatek: control buffer enablement tweaks
> 
>   .../bindings/thermal/mediatek-thermal.txt          |   1 +
>   drivers/thermal/mtk_thermal.c                      | 117 +++++++++++++++++----
>   2 files changed, 96 insertions(+), 22 deletions(-)
> ---

Applied, with some changes and the subject fixed:

Subject format for thermal is: thermal/drivers/<thedriver>: [A-Z]*.

Thanks

   -- Daniel

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog