Devicetree
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Christian Marangi <ansuelsmth@gmail.com>,
	Benjamin Larsson <benjamin.larsson@genexis.eu>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, Xuegang Lu <xuegang.lu@airoha.com>
Subject: Re: [PATCH net-next v6 02/12] net: airoha: Reserve RX headroom to avoid skb reallocation
Date: Tue, 12 May 2026 22:31:48 +0200	[thread overview]
Message-ID: <agOONOLeIVbErlXD@lore-desk> (raw)
In-Reply-To: <20260511-airoha-eth-multi-serdes-v6-2-c899462c4f75@kernel.org>

[-- Attachment #1: Type: text/plain, Size: 3105 bytes --]

On May 11, Lorenzo Bianconi wrote:
> Reserve NET_SKB_PAD + NET_IP_ALIGN bytes of headroom for received packets
> to avoid skb head reallocation when pushing protocol headers into the skb.
> 
> Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
>  drivers/net/ethernet/airoha/airoha_eth.c | 12 ++++++++----
>  drivers/net/ethernet/airoha/airoha_eth.h |  2 ++
>  2 files changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
> index f71fb18197ec..3fe2561c85f1 100644
> --- a/drivers/net/ethernet/airoha/airoha_eth.c
> +++ b/drivers/net/ethernet/airoha/airoha_eth.c
> @@ -543,9 +543,10 @@ static int airoha_qdma_fill_rx_queue(struct airoha_queue *q)
>  		q->queued++;
>  		nframes++;
>  
> +		offset += AIROHA_RX_HEADROOM;
>  		e->buf = page_address(page) + offset;
>  		e->dma_addr = page_pool_get_dma_addr(page) + offset;
> -		e->dma_len = SKB_WITH_OVERHEAD(q->buf_size);
> +		e->dma_len = SKB_WITH_OVERHEAD(AIROHA_RX_LEN(q->buf_size));
>  
>  		val = FIELD_PREP(QDMA_DESC_LEN_MASK, e->dma_len);
>  		WRITE_ONCE(desc->ctrl, cpu_to_le32(val));
> @@ -616,8 +617,9 @@ static int airoha_qdma_rx_process(struct airoha_queue *q, int budget)
>  
>  		page = virt_to_head_page(e->buf);
>  		len = FIELD_GET(QDMA_DESC_LEN_MASK, desc_ctrl);
> -		data_len = q->skb ? q->buf_size
> -				  : SKB_WITH_OVERHEAD(q->buf_size);
> +		data_len = q->skb
> +			   ? AIROHA_RX_LEN(q->buf_size)
> +			   : SKB_WITH_OVERHEAD(AIROHA_RX_LEN(q->buf_size));
>  		if (!len || data_len < len)
>  			goto free_frag;
>  
> @@ -627,10 +629,12 @@ static int airoha_qdma_rx_process(struct airoha_queue *q, int budget)
>  
>  		port = eth->ports[p];
>  		if (!q->skb) { /* first buffer */
> -			q->skb = napi_build_skb(e->buf, q->buf_size);
> +			q->skb = napi_build_skb(e->buf - AIROHA_RX_HEADROOM,
> +						q->buf_size);
>  			if (!q->skb)
>  				goto free_frag;
>  
> +			skb_reserve(q->skb, AIROHA_RX_HEADROOM);
>  			__skb_put(q->skb, len);
>  			skb_mark_for_recycle(q->skb);
>  			q->skb->dev = port->dev;
> diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
> index 58530d096de7..d3781103abb5 100644
> --- a/drivers/net/ethernet/airoha/airoha_eth.h
> +++ b/drivers/net/ethernet/airoha/airoha_eth.h
> @@ -32,6 +32,8 @@
>  #define AIROHA_FE_MC_MAX_VLAN_TABLE	64
>  #define AIROHA_FE_MC_MAX_VLAN_PORT	16
>  #define AIROHA_NUM_TX_IRQ		2
> +#define AIROHA_RX_HEADROOM		(NET_SKB_PAD + NET_IP_ALIGN)
> +#define AIROHA_RX_LEN(_n)		((_n) - AIROHA_RX_HEADROOM)
>  #define HW_DSCP_NUM			2048
>  #define IRQ_QUEUE_LEN(_n)		((_n) ? 1024 : 2048)
>  #define TX_DSCP_NUM			1024
> 
> -- 
> 2.54.0
> 

commenting on sashiko's report:
https://sashiko.dev/#/patchset/20260511-airoha-eth-multi-serdes-v6-0-c899462c4f75%40kernel.org

- Does the length passed to dma_sync_single_for_cpu() also need to be updated
  to match the new DMA length?
  I will fix it in v7.

Regards,
Lorenzo

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2026-05-12 20:31 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-11 10:49 [PATCH net-next v6 00/12] net: airoha: Support multiple net_devices connected to the same GDM port Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 01/12] dt-bindings: net: airoha: Add EN7581 ethernet-ports properties Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 02/12] net: airoha: Reserve RX headroom to avoid skb reallocation Lorenzo Bianconi
2026-05-12 20:31   ` Lorenzo Bianconi [this message]
2026-05-11 10:49 ` [PATCH net-next v6 03/12] net: airoha: Introduce airoha_gdm_dev struct Lorenzo Bianconi
2026-05-12 20:55   ` Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 04/12] net: airoha: Move airoha_qdma pointer in " Lorenzo Bianconi
2026-05-13  8:45   ` Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 05/12] net: airoha: Rely on airoha_gdm_dev pointer in airhoa_is_lan_gdm_port() Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 06/12] net: airoha: Move qos_sq_bmap in airoha_gdm_dev struct Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 07/12] net: airoha: Move {cpu,fwd}_tx_packets " Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 08/12] net: airoha: Support multiple net_devices for a single FE GDM port Lorenzo Bianconi
2026-05-13  9:26   ` Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 09/12] net: airoha: Do not stop GDM port if it is shared Lorenzo Bianconi
2026-05-12 21:31   ` sashiko-bot
2026-05-13  9:43     ` Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 10/12] net: airoha: Introduce WAN device flag Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 11/12] net: airoha: Support multiple LAN/WAN interfaces for hw MAC address configuration Lorenzo Bianconi
2026-05-12 17:49   ` Benjamin Larsson
2026-05-12 20:58     ` Lorenzo Bianconi
2026-05-12 23:47   ` sashiko-bot
2026-05-13 10:35     ` Lorenzo Bianconi
2026-05-11 10:49 ` [PATCH net-next v6 12/12] net: airoha: Better handle MIB for GDM with multiple port attached Lorenzo Bianconi
2026-05-12 23:32   ` sashiko-bot
2026-05-13 10:46     ` Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=agOONOLeIVbErlXD@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=benjamin.larsson@genexis.eu \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=xuegang.lu@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox