Re: [PATCH RFC 6/9] arm64: dts: qcom: shikra: Add ethernet nodes

[Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>]

On Fri, Jun 12, 2026 at 12:07:02AM +0530, Mohd Ayaan Anwar wrote:
> +			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
> +				 <&gcc GCC_EMAC0_AHB_CLK>,
> +				 <&gcc GCC_EMAC0_PTP_CLK>,
> +				 <&gcc GCC_EMAC0_RGMII_CLK>,
> +				 <&gcc GCC_EMAC0_AXI_CLK>,
> +				 <&gcc GCC_EMAC0_AXI_SYS_NOC_CLK>,
> +				 <&gcc GCC_PCIE_TILE_AXI_SYS_NOC_CLK>;
> +			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii",
> +				      "axi", "axi-noc", "pcie-tile-axi-noc";
> +

I now realize that having GCC_EMAC0_AXI_CLK for both "stmmaceth" and
"axi" clocks is probably wrong. I will remove "axi" and have the glue
driver enable and set rates for "stmmaceth", "axi-noc" and
"pcie-tile-axi-noc" to ungate DDR access.

	Ayaan