Devicetree
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Yuanshen Cao <alex.caoys@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>,
	dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 5/5] dmaengine: sun6i-dma: Implement support for Allwinner A733 DMA controller
Date: Sun, 21 Jun 2026 17:22:54 -0500	[thread overview]
Message-ID: <ajhkPus-ZV9prECQ@SMW015318> (raw)
In-Reply-To: <20260621-sun60i-a733-dma-v2-5-340f205891cc@gmail.com>

On Sun, Jun 21, 2026 at 09:40:58PM +0000, Yuanshen Cao wrote:
> This patch implements the actual support for the Allwinner A733 DMA

Avoid use words "this patch/commit",

Support Allwinner A733 DMA ...


Frank
> controller. It defines the new register offsets and bitfield mappings
> required for the A733, which slightly differs from the older `sun6i`
> series.
>
> Changes:
> - New register macros for A733 interrupt enable `DMA_IRQ_EN_A733` and
>   status `DMA_IRQ_STAT_A733`.
> - New `SRC_HIGH_ADDR_32G` and `DST_HIGH_ADDR_32G` macro to handle the
>   32G high-address field in the LLI.
> - Implemented `sun6i_dma_set_addr_a733` and A733-specific interrupt
>   register accessors.
> - Added `sun60i_a733_dma_config`, which ties all the refactored
>   functionality together for this specific hardware.
>
> Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
> ---
>  drivers/dma/sun6i-dma.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
>
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index 196a0d73b221..4808015934cc 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -52,6 +52,15 @@
>  #define SUNXI_H3_SECURE_REG		0x20
>  #define SUNXI_H3_DMA_GATE		0x28
>  #define SUNXI_H3_DMA_GATE_ENABLE	0x4
> +
> +/*
> + * sun60i specific registers
> + */
> +#define DMA_IRQ_EN_A733(x)		((x) * 0x40 + 0x134)
> +#define DMA_IRQ_STAT_A733(x)		((x) * 0x40 + 0x138)
> +
> +#define DMA_IRQ_CHAN_NR_A733		1
> +
>  /*
>   * Channels specific registers
>   */
> @@ -100,6 +109,8 @@
>   */
>  #define SRC_HIGH_ADDR(x)		(((x) & 0x3U) << 16)
>  #define DST_HIGH_ADDR(x)		(((x) & 0x3U) << 18)
> +#define SRC_HIGH_ADDR_32G(x)	(((x) & 0x7U) << 11)
> +#define DST_HIGH_ADDR_32G(x)	(((x) & 0x7U) << 15)
>
>  /*
>   * Various hardware related defines
> @@ -257,6 +268,23 @@ static inline void sun6i_dma_dump_com_regs(struct sun6i_dma_dev *sdev)
>  		DMA_STAT, readl(sdev->base + DMA_STAT));
>  }
>
> +static inline void sun6i_dma_dump_com_regs_a733(struct sun6i_dma_dev *sdev)
> +{
> +	int i;
> +
> +	for (i = 0; i < sdev->num_pchans / sdev->cfg->num_channels_per_reg; i++) {
> +		dev_dbg(sdev->slave.dev, "Common register:\n"
> +			"chan num %d\n"
> +			"\tmask(%04x): 0x%08x\n"
> +			"\tpend(%04x): 0x%08x\n"
> +			"\tstats(%04x): 0x%08x\n",
> +			i,
> +			DMA_IRQ_EN_A733(i), readl(sdev->base + DMA_IRQ_EN_A733(i)),
> +			DMA_IRQ_STAT_A733(i), readl(sdev->base + DMA_IRQ_STAT_A733(i)),
> +			DMA_STAT, readl(sdev->base + DMA_STAT));
> +	}
> +}
> +
>  static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
>  					    struct sun6i_pchan *pchan)
>  {
> @@ -360,21 +388,41 @@ static u32 sun6i_read_irq_en(struct sun6i_dma_dev *sdev, u32 irq_reg)
>  	return readl(sdev->base + DMA_IRQ_EN(irq_reg));
>  }
>
> +static u32 sun6i_read_irq_en_a733(struct sun6i_dma_dev *sdev, u32 irq_reg)
> +{
> +	return readl(sdev->base + DMA_IRQ_EN_A733(irq_reg));
> +}
> +
>  static void sun6i_write_irq_en(struct sun6i_dma_dev *sdev, u32 irq_reg, u32 irq_val)
>  {
>  	writel(irq_val, sdev->base + DMA_IRQ_EN(irq_reg));
>  }
>
> +static void sun6i_write_irq_en_a733(struct sun6i_dma_dev *sdev, u32 irq_reg, u32 irq_val)
> +{
> +	writel(irq_val, sdev->base + DMA_IRQ_EN_A733(irq_reg));
> +}
> +
>  static u32 sun6i_read_irq_stat(struct sun6i_dma_dev *sdev, u32 irq_reg)
>  {
>  	return readl(sdev->base + DMA_IRQ_STAT(irq_reg));
>  }
>
> +static u32 sun6i_read_irq_stat_a733(struct sun6i_dma_dev *sdev, u32 irq_reg)
> +{
> +	return readl(sdev->base + DMA_IRQ_STAT_A733(irq_reg));
> +}
> +
>  static void sun6i_write_irq_stat(struct sun6i_dma_dev *sdev, u32 irq_reg, u32 status)
>  {
>  	writel(status, sdev->base + DMA_IRQ_STAT(irq_reg));
>  }
>
> +static void sun6i_write_irq_stat_a733(struct sun6i_dma_dev *sdev, u32 irq_reg, u32 status)
> +{
> +	writel(status, sdev->base + DMA_IRQ_STAT_A733(irq_reg));
> +}
> +
>  static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
>  {
>  	struct sun6i_desc *txd = pchan->desc;
> @@ -695,6 +743,17 @@ static void sun6i_dma_set_addr_a100(struct sun6i_dma_dev *sdev,
>  				DST_HIGH_ADDR(upper_32_bits(dst));
>  }
>
> +static void sun6i_dma_set_addr_a733(struct sun6i_dma_dev *sdev,
> +				      struct sun6i_dma_lli *v_lli,
> +				      dma_addr_t src, dma_addr_t dst)
> +{
> +	v_lli->src = lower_32_bits(src);
> +	v_lli->dst = lower_32_bits(dst);
> +
> +	v_lli->para |= SRC_HIGH_ADDR_32G(upper_32_bits(src)) |
> +				DST_HIGH_ADDR_32G(upper_32_bits(dst));
> +}
> +
>  static inline void sun6i_dma_set_addr(struct sun6i_dma_dev *sdev,
>  				      struct sun6i_dma_lli *v_lli,
>  				      dma_addr_t src, dma_addr_t dst)
> @@ -1339,6 +1398,33 @@ static struct sun6i_dma_config sun50i_h6_dma_cfg = {
>  	SUN6I_DMA_IRQ_A31_COMMON_OPS
>  };
>
> +/*
> + * The A733 binding uses the number of dma channels from the
> + * device tree node.
> + */
> +static struct sun6i_dma_config sun60i_a733_dma_cfg = {
> +	.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
> +	.set_burst_length = sun6i_set_burst_length_h3,
> +	.set_drq          = sun6i_set_drq_h6,
> +	.set_mode         = sun6i_set_mode_h6,
> +	.set_addr         = sun6i_dma_set_addr_a733,
> +	.dump_com_regs    = sun6i_dma_dump_com_regs_a733,
> +	.read_irq_en      = sun6i_read_irq_en_a733,
> +	.write_irq_en     = sun6i_write_irq_en_a733,
> +	.read_irq_stat    = sun6i_read_irq_stat_a733,
> +	.write_irq_stat   = sun6i_write_irq_stat_a733,
> +	.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
> +	.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
> +	.src_addr_widths   = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> +			     BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> +			     BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
> +	.dst_addr_widths   = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> +			     BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> +			     BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
> +	.num_channels_per_reg = DMA_IRQ_CHAN_NR_A733,
> +	.has_mbus_clk = true,
> +};
> +
>  /*
>   * The V3s have only 8 physical channels, a maximum DRQ port id of 23,
>   * and a total of 24 usable source and destination endpoints.
> @@ -1375,6 +1461,7 @@ static const struct of_device_id sun6i_dma_match[] = {
>  	{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
>  	{ .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
>  	{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
> +	{ .compatible = "allwinner,sun60i-a733-dma", .data = &sun60i_a733_dma_cfg },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sun6i_dma_match);
>
> --
> 2.54.0
>

      parent reply	other threads:[~2026-06-21 22:23 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-21 21:40 [PATCH v2 0/5] dmaengine: sun6i-dma: Add support for Allwinner A733 DMA controller Yuanshen Cao
2026-06-21 21:40 ` [PATCH v2 1/5] dmaengine: sun6i-dma: Refactor to support A733 interrupt and register handling Yuanshen Cao
2026-06-21 21:57   ` sashiko-bot
2026-06-21 22:14   ` Frank Li
2026-06-21 21:40 ` [PATCH v2 2/5] dmaengine: sun6i-dma: Add set_addr function pointer for variable address widths Yuanshen Cao
2026-06-21 21:51   ` sashiko-bot
2026-06-21 22:16   ` Frank Li
2026-06-21 21:40 ` [PATCH v2 3/5] dmaengine: sun6i-dma: Add num_channels_per_reg for flexible interrupt mapping Yuanshen Cao
2026-06-21 21:55   ` sashiko-bot
2026-06-21 22:18   ` Frank Li
2026-06-21 21:40 ` [PATCH v2 4/5] dt-bindings: dma: sun50i-a64-dma: Add allwinner,sun60i-a733-dma compatible string Yuanshen Cao
2026-06-21 21:52   ` sashiko-bot
2026-06-21 22:19   ` Frank Li
2026-06-21 21:40 ` [PATCH v2 5/5] dmaengine: sun6i-dma: Implement support for Allwinner A733 DMA controller Yuanshen Cao
2026-06-21 21:53   ` sashiko-bot
2026-06-21 22:22   ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ajhkPus-ZV9prECQ@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=alex.caoys@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=vkoul@kernel.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox