From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Cc: Sylvain Petinot <sylvain.petinot@foss.st.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH 3/5] media: i2c: vd55g1: Fix manual digital gain on color variant
Date: Mon, 22 Jun 2026 12:09:57 +0200 [thread overview]
Message-ID: <ajkJ3u4VdXHWEePt@zed> (raw)
In-Reply-To: <20260428-vd55g4_and_fixes-v1-3-4f745a83b87e@foss.st.com>
Hi Benjamin
On Tue, Apr 28, 2026 at 10:40:57AM +0200, Benjamin Mugnier wrote:
> Apply digital gain to all channels, each channel representing a color.
>
> Fixes: e138e7f00042 ("media: i2c: vd55g1: Add support for vd65g4 RGB variant")
Also cc stable here
>
> Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Thanks
j
> ---
> drivers/media/i2c/vd55g1.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/i2c/vd55g1.c b/drivers/media/i2c/vd55g1.c
> index e44174056ace..2c962fcb41d2 100644
> --- a/drivers/media/i2c/vd55g1.c
> +++ b/drivers/media/i2c/vd55g1.c
> @@ -60,7 +60,10 @@
> #define VD55G1_PATGEN_ENABLE BIT(0)
> #define VD55G1_REG_MANUAL_ANALOG_GAIN CCI_REG8(0x0501)
> #define VD55G1_REG_MANUAL_COARSE_EXPOSURE CCI_REG16_LE(0x0502)
> -#define VD55G1_REG_MANUAL_DIGITAL_GAIN CCI_REG16_LE(0x0504)
> +#define VD55G1_REG_MANUAL_DIGITAL_GAIN_CH0 CCI_REG16_LE(0x0504)
> +#define VD55G1_REG_MANUAL_DIGITAL_GAIN_CH1 CCI_REG16_LE(0x0506)
> +#define VD55G1_REG_MANUAL_DIGITAL_GAIN_CH2 CCI_REG16_LE(0x0508)
> +#define VD55G1_REG_MANUAL_DIGITAL_GAIN_CH3 CCI_REG16_LE(0x050a)
> #define VD55G1_REG_APPLIED_COARSE_EXPOSURE CCI_REG16_LE(0x00e8)
> #define VD55G1_REG_APPLIED_ANALOG_GAIN CCI_REG16_LE(0x00ea)
> #define VD55G1_REG_APPLIED_DIGITAL_GAIN CCI_REG16_LE(0x00ec)
> @@ -850,9 +853,16 @@ static int vd55g1_update_expo_cluster(struct vd55g1 *sensor, bool is_auto)
> vd55g1_write(sensor, VD55G1_REG_MANUAL_ANALOG_GAIN,
> sensor->again_ctrl->val, &ret);
>
> - if (!is_auto && sensor->dgain_ctrl->is_new)
> - vd55g1_write(sensor, VD55G1_REG_MANUAL_DIGITAL_GAIN,
> + if (!is_auto && sensor->dgain_ctrl->is_new) {
> + vd55g1_write(sensor, VD55G1_REG_MANUAL_DIGITAL_GAIN_CH0,
> sensor->dgain_ctrl->val, &ret);
> + vd55g1_write(sensor, VD55G1_REG_MANUAL_DIGITAL_GAIN_CH1,
> + sensor->dgain_ctrl->val, &ret);
> + vd55g1_write(sensor, VD55G1_REG_MANUAL_DIGITAL_GAIN_CH2,
> + sensor->dgain_ctrl->val, &ret);
> + vd55g1_write(sensor, VD55G1_REG_MANUAL_DIGITAL_GAIN_CH3,
> + sensor->dgain_ctrl->val, &ret);
> + }
>
> return ret;
> }
>
> --
> 2.43.0
>
>
next prev parent reply other threads:[~2026-06-22 10:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 8:40 [PATCH 0/5] media: i2c: vd55g1: Add vd55g4 support and various fixes Benjamin Mugnier
2026-04-28 8:40 ` [PATCH 1/5] media: i2c: vd55g1: Fix media bus code initialization Benjamin Mugnier
2026-06-22 9:28 ` Jacopo Mondi
2026-04-28 8:40 ` [PATCH 2/5] media: i2c: vd55g1: Remove spurious pad format update on init_state() Benjamin Mugnier
2026-06-22 9:30 ` Jacopo Mondi
2026-04-28 8:40 ` [PATCH 3/5] media: i2c: vd55g1: Fix manual digital gain on color variant Benjamin Mugnier
2026-06-22 10:09 ` Jacopo Mondi [this message]
2026-04-28 8:40 ` [PATCH 4/5] media: i2c: vd55g1: Add support for vd55g4 Benjamin Mugnier
2026-06-22 10:16 ` Jacopo Mondi
2026-04-28 8:40 ` [PATCH 5/5] media: dt-bindings: vd55g1: Add vd55g4 compatible Benjamin Mugnier
2026-04-30 9:37 ` Krzysztof Kozlowski
2026-05-04 15:02 ` Benjamin Mugnier
2026-06-19 14:20 ` [PATCH 0/5] media: i2c: vd55g1: Add vd55g4 support and various fixes Benjamin Mugnier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ajkJ3u4VdXHWEePt@zed \
--to=jacopo.mondi@ideasonboard.com \
--cc=benjamin.mugnier@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil+cisco@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=sylvain.petinot@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox