Re: [PATCH v2 2/2] iio: dac: dac8163: Add driver for DAC8163

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Wed, Jul 08, 2026 at 11:52:44AM +0200, Lukas Metz wrote:
> The DAC756x, DAC816x, and DAC856x devices are low-power, voltage-output,
> dual-channel, 12-, 14-, and 16-bit digital-to-analog converters (DACs),
> respectively. These devices include a 2.5-V, 4-ppm/°C internal
> reference, giving a full-scale output voltage range of 2.5 V or 5 V.

At the first glance it seems I already commented on the issues in this driver.
Yes, I see that I commented

  "Leave trailing commas in the non-terminator entries here and there."

and in several places in this version it has not been addressed.
Taking into account this I don't want to go through and check what
else is missing, so please go again to v1 and carefully read *all*
the comments and either address them, or explain why it's not done.

...

> +#include <linux/array_size.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/err.h>

> +#include <linux/errno.h>

Not needed, err.h provides for standard error codes.

> +#include <linux/gpio/consumer.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +#include <linux/stddef.h>
> +#include <linux/types.h>
> +#include <linux/units.h>

-- 
With Best Regards,
Andy Shevchenko