From: Frank Li <Frank.li@oss.nxp.com>
To: Chancel Liu <chancel.liu@oss.nxp.com>
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/3] arm64: dts: imx91-9x9-qsb: Add PDM microphone sound card support
Date: Fri, 10 Jul 2026 10:50:19 -0500 [thread overview]
Message-ID: <alEUu_Vj7ZAkWikC@SMW015318> (raw)
In-Reply-To: <20260710024204.3462444-4-chancel.liu@oss.nxp.com>
On Fri, Jul 10, 2026 at 11:42:04AM +0900, Chancel Liu wrote:
> From: Chancel Liu <chancel.liu@nxp.com>
>
> Add PDM microphone sound card support, configure the pinmux.
>
> This sound card supports recording sound from PDM microphone and
> convert the PDM format data to PCM data.
>
> Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
> ---
> .../boot/dts/freescale/imx91-9x9-qsb.dts | 44 +++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts
> index e5983bb083ea..2f663b1f7c56 100644
> --- a/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts
> +++ b/arch/arm64/boot/dts/freescale/imx91-9x9-qsb.dts
> @@ -79,6 +79,18 @@ sai1_fun: sai1-grp {
> };
> };
>
> + dmic: dmic {
Is it order? look like it is after pinctrl-gpiomux, can you try best to
keep nodename orderred.
Frank
> + compatible = "dmic-codec";
> + #sound-dai-cells = <0>;
> + num-channels = <4>;
> +
> + port {
> + dmic_ep: endpoint {
> + remote-endpoint = <&micfil_ep>;
> + };
> + };
> + };
> +
> reg_vref_1v8: regulator-adc-vref {
> compatible = "regulator-fixed";
> regulator-name = "vref_1v8";
> @@ -111,6 +123,12 @@ linux,cma {
> };
> };
>
> + sound-micfil {
> + compatible = "audio-graph-card2";
> + label = "micfil-audio";
> + links = <&micfil_port>;
> + };
> +
> sound-wm8524 {
> compatible = "audio-graph-card2";
> label = "wm8524-audio";
> @@ -202,6 +220,14 @@ MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
> >;
> };
>
> + pinctrl_pdm: pdmgrp {
> + fsl,pins = <
> + MX91_PAD_PDM_CLK__PDM_CLK 0x31e
> + MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x31e
> + MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x31e
> + >;
> + };
> +
> pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> fsl,pins = <
> MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e
> @@ -464,6 +490,24 @@ &lpuart1 {
> status = "okay";
> };
>
> +&micfil {
> + #sound-dai-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pdm>, <&pdm_fun>;
> + assigned-clocks = <&clk IMX93_CLK_PDM>;
> + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> + assigned-clock-rates = <49152000>;
> + status = "okay";
> +
> + micfil_port: port {
> + capture-only;
> +
> + micfil_ep: endpoint {
> + remote-endpoint = <&dmic_ep>;
> + };
> + };
> +};
> +
> &sai1 {
> #sound-dai-cells = <0>;
> pinctrl-names = "default";
> --
> 2.50.1
>
>
prev parent reply other threads:[~2026-07-10 15:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-10 2:42 [PATCH v2 0/3] Add audio support on i.MX91 9x9 QSB Chancel Liu
2026-07-10 2:42 ` [PATCH v2 1/3] arm64: dts: imx91-9x9-qsb: Add audio-related board muxes Chancel Liu
2026-07-10 2:42 ` [PATCH v2 2/3] arm64: dts: imx91-9x9-qsb: Add WM8524 sound card support Chancel Liu
2026-07-10 2:42 ` [PATCH v2 3/3] arm64: dts: imx91-9x9-qsb: Add PDM microphone " Chancel Liu
2026-07-10 15:50 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alEUu_Vj7ZAkWikC@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=chancel.liu@oss.nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox