From: atull <atull@opensource.altera.com>
To: Weike Chen <alvin.chen@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Boon Leong Ong <boon.leong.ong@intel.com>,
Andriy Shevchenko <andriy.shevchenko@intel.com>,
Mika Westerberg <mika.westerberg@intel.com>,
Hock Leong Kweh <hock.leong.kweh@intel.com>,
Darren Hart <dvhart@linux.intel.com>
Subject: Re: [PATCH 2/3] GPIO: gpio-dwapb: Support Debounce
Date: Thu, 28 Aug 2014 10:11:56 -0500 [thread overview]
Message-ID: <alpine.DEB.2.02.1408281007290.26299@atx-linux-37> (raw)
In-Reply-To: <1409161588-19417-3-git-send-email-alvin.chen@intel.com>
On Wed, 27 Aug 2014, Weike Chen wrote:
> This patch enables 'debounce' for the designware GPIO, and
> it is based on Josef Ahmad's previous work.
>
> Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
> Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>
> Signed-off-by: Weike Chen <alvin.chen@intel.com>
> ---
> drivers/gpio/gpio-dwapb.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> index 155a64b..e0ab988 100644
> --- a/drivers/gpio/gpio-dwapb.c
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -36,6 +36,7 @@
> #define GPIO_INTTYPE_LEVEL 0x38
> #define GPIO_INT_POLARITY 0x3c
> #define GPIO_INTSTATUS 0x40
> +#define GPIO_PORTA_DEBOUNCE 0x48
> #define GPIO_PORTA_EOI 0x4c
> #define GPIO_EXT_PORTA 0x50
> #define GPIO_EXT_PORTB 0x54
> @@ -64,6 +65,23 @@ struct dwapb_gpio {
> const struct dwapb_gpio_platform_data *pdata;
> };
>
> +static inline u32 dwapb_read(struct dwapb_gpio *gpio, unsigned int offset)
> +{
> + struct bgpio_chip *bgc = &gpio->ports[0].bgc;
> + void __iomem *reg_base = gpio->regs;
> +
> + return bgc->read_reg(reg_base + offset);
> +}
> +
> +static inline void dwapb_write(struct dwapb_gpio *gpio, unsigned int offset,
> + u32 val)
> +{
> + struct bgpio_chip *bgc = &gpio->ports[0].bgc;
> + void __iomem *reg_base = gpio->regs;
> +
> + bgc->write_reg(reg_base + offset, val);
> +}
> +
Hello,
I don't understand the reason for adding dwapb_read and dwapb_write here.
The rest of the driver is using readl and writel. I'd rather not see two
different methods being used in the same driver for register access.
Maybe I'm missing something, but if we need to add dwapb_read/write, then
it should be used for all register access.
Alan
> static int dwapb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
> {
> struct bgpio_chip *bgc = to_bgpio_chip(gc);
> @@ -209,6 +227,29 @@ static int dwapb_irq_set_type(struct irq_data *d, u32 type)
> return 0;
> }
>
> +static int dwapb_gpio_set_debounce(struct gpio_chip *gc,
> + unsigned offset, unsigned debounce)
> +{
> + struct bgpio_chip *bgc = to_bgpio_chip(gc);
> + struct dwapb_gpio_port *port =
> + container_of(bgc, struct dwapb_gpio_port, bgc);
> + struct dwapb_gpio *gpio = port->gpio;
> + unsigned long flags, val_deb;
> + unsigned long mask = bgc->pin2mask(bgc, offset);
> +
> + spin_lock_irqsave(&bgc->lock, flags);
> +
> + val_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
> + if (debounce)
> + dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, mask | val_deb);
> + else
> + dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, ~mask & val_deb);
> +
> + spin_unlock_irqrestore(&bgc->lock, flags);
> +
> + return 0;
> +}
> +
> static irqreturn_t dwapb_irq_handler_mfd(int irq, void *dev_id)
> {
> struct irq_desc *desc = irq_to_desc(irq);
> @@ -342,6 +383,7 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
>
> port->bgc.gc.ngpio = pp->ngpio;
> port->bgc.gc.base = pp->gpio_base;
> + port->bgc.gc.set_debounce = dwapb_gpio_set_debounce;
>
> /*
> * Only port A can provide interrupts in all configurations of the IP.
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-08-28 15:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-27 17:46 [PATCH 0/3] The Designware GPIO Supporting Weike Chen
2014-08-27 17:46 ` [PATCH 1/3] GPIO: gpio-dwapb: Enable platform driver binding to MFD driver Weike Chen
[not found] ` <1409161588-19417-2-git-send-email-alvin.chen-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-09-03 6:57 ` Linus Walleij
2014-09-03 20:03 ` Sebastian Andrzej Siewior
2014-09-04 2:00 ` Chen, Alvin
2014-09-04 7:30 ` Sebastian Andrzej Siewior
2014-09-04 10:38 ` Chen, Alvin
2014-09-04 12:01 ` Shevchenko, Andriy
2014-08-27 17:46 ` [PATCH 2/3] GPIO: gpio-dwapb: Support Debounce Weike Chen
2014-08-28 15:11 ` atull [this message]
2014-08-29 7:38 ` Shevchenko, Andriy
2014-09-01 3:03 ` Chen, Alvin
2014-08-27 17:46 ` [PATCH 3/3] GPIO: gpio-dwapb: Suspend & Resume PM enabling Weike Chen
2014-08-27 16:15 ` atull
2014-08-28 1:09 ` Chen, Alvin
2014-08-28 15:01 ` atull
2014-09-01 3:20 ` Chen, Alvin
[not found] ` <1409161588-19417-4-git-send-email-alvin.chen-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-09-04 16:45 ` Linus Walleij
2014-09-05 2:09 ` Chen, Alvin
2014-09-05 8:00 ` Linus Walleij
2014-09-05 8:20 ` Chen, Alvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1408281007290.26299@atx-linux-37 \
--to=atull@opensource.altera.com \
--cc=alvin.chen@intel.com \
--cc=andriy.shevchenko@intel.com \
--cc=boon.leong.ong@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dvhart@linux.intel.com \
--cc=gnurou@gmail.com \
--cc=grant.likely@linaro.org \
--cc=hock.leong.kweh@intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@intel.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox