devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dinh Nguyen <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
To: tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org
Cc: bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org,
	dougthompson-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org,
	m.chehab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-edac-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCH 4/5] ARM: socfpga: Enable Arria10 L2 cache ECC on startup
Date: Sat, 5 Mar 2016 00:36:16 -0600	[thread overview]
Message-ID: <alpine.DEB.2.02.1603050030190.9477@linux-builds1> (raw)
In-Reply-To: <1456850301-22066-4-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

On Tue, 1 Mar 2016, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:

> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> 
> Enable ECC for Arria10 L2 cache on machine startup. The ECC has to be
> enabled before data is stored in memory otherwise the ECC will fail
> on reads.
> 
> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> ---
>  arch/arm/mach-socfpga/l2_cache.c |   42 ++++++++++++++++++++++++++++++++++----
>  1 file changed, 38 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
> index e3907ab..b197218 100644
> --- a/arch/arm/mach-socfpga/l2_cache.c
> +++ b/arch/arm/mach-socfpga/l2_cache.c
> @@ -17,14 +17,31 @@
>  #include <linux/of_platform.h>
>  #include <linux/of_address.h>
>  
> +#include "core.h"
> +
> +/* A10 System Manager ECC interrupt mask control registers */
> +#define A10_L2_ECC_CTRL_OFST            0x0
> +
> +#define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98
> +#define A10_L2_ECC_INT_CLR_OFST         0xA8
> +
> +#define A10_MPU_CTRL_L2_ECC_EN          BIT(0)
> +#define A10_ECC_INTMASK_CLR_EN          BIT(0)
> +#define A10_ECC_INT_CLR                 (BIT(31) | BIT(15))
> +
>  void socfpga_init_l2_ecc(void)
>  {
>  	struct device_node *np;
>  	void __iomem *mapped_l2_edac_addr;
> +	const char *compat = "altr,socfpga-l2-ecc";
>  
> -	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc");
> +	if (of_machine_is_compatible("altr,socfpga-arria10"))
> +		compat = "altr,socfpga-a10-l2-ecc";

The ARM maintainers have made comment to me about about trying to not sprinkle
these of_machine_is_compatible() all over the place. You should make the
decision during the initial probe of the machine. Please look at how the
.restart is differentiate between the 2 platforms.


> +
> +	/* Find the L2 EDAC device tree node */
> +	np = of_find_compatible_node(NULL, NULL, compat);
>  	if (!np) {
> -		pr_err("Unable to find socfpga-l2-ecc in dtb\n");
> +		pr_err("Unable to find %s in dtb\n", compat);
>  		return;
>  	}
>  
> @@ -35,7 +52,24 @@ void socfpga_init_l2_ecc(void)
>  		return;
>  	}
>  
> -	/* Enable ECC */
> -	writel(0x01, mapped_l2_edac_addr);
> +	if (of_machine_is_compatible("altr,socfpga-arria10")) {

Same comment as above here.

BR,
Dinh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-03-05  6:36 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-01 16:38 [PATCH 1/5] EDAC: Altera L2 Kconfig change from select to depends upon tthayer
2016-03-01 16:38 ` [PATCH 2/5] Documentation: dt: socfpga: Add Altera Arri10 L2 cache binding tthayer
2016-03-05  4:26   ` Rob Herring
2016-03-01 16:38 ` [PATCH 3/5] EDAC, altera: Addition of Arria10 L2 Cache ECC tthayer
2016-03-04 10:38   ` Borislav Petkov
2016-03-04 15:42     ` Thor Thayer
2016-03-01 16:38 ` [PATCH 4/5] ARM: socfpga: Enable Arria10 L2 cache ECC on startup tthayer
     [not found]   ` <1456850301-22066-4-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2016-03-05  6:36     ` Dinh Nguyen [this message]
2016-03-01 16:38 ` [PATCH 5/5] ARM: dts: Add Altera Arria10 L2 Cache EDAC devicetree entry tthayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.02.1603050030190.9477@linux-builds1 \
    --to=dinguyen-yzvpicuk2abmcg4ihk0kfoh6mc4mb0vx@public.gmane.org \
    --cc=bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dougthompson-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-edac-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=m.chehab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
    --cc=tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).