Devicetree
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Danila Tikhonov <danila@mainlining.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Kate Hsuan <hpa@redhat.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Eugene Lepshy <fekz115@gmail.com>,
	Vasiliy Doylov <neko@altlinux.org>,
	Achill Gilgenast <achill@achill.org>,
	Luca Weiss <luca.weiss@fairphone.com>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht
Subject: Re: [PATCH 1/4] dt-bindings: media: i2c: Add Sony IMX471 CMOS Image Sensor
Date: Thu, 6 Aug 2026 13:33:38 +0300	[thread overview]
Message-ID: <anRjAhAhFBWfgxvV@kekkonen.localdomain> (raw)
In-Reply-To: <20260805-imx471-v1-1-7be79f539ed8@mainlining.org>

Hi Danila,

Thanks for the set.

On Wed, Aug 05, 2026 at 10:54:24PM +0300, Danila Tikhonov wrote:
> Document the Sony IMX471 CMOS Image Sensor.
> 
> Signed-off-by: Danila Tikhonov <danila@mainlining.org>
> ---
>  .../devicetree/bindings/media/i2c/sony,imx471.yaml | 123 +++++++++++++++++++++
>  1 file changed, 123 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml
> new file mode 100644
> index 000000000000..9c6c7c55746f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/sony,imx471.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX471 CMOS Image Sensor
> +
> +maintainers:
> +  - Danila Tikhonov <danila@mainlining.org>
> +
> +description: |-

I believe you can drop ' |-'.

> +  The Sony IMX471 is a diagonal 5.822 mm (Type 1/3.09) 16-megapixel
> +  back-illuminated stacked CMOS active pixel image sensor with a 4656 x 3496
> +  active pixel array and 1.0 um square pixels. It uses a Quad Bayer color filter
> +  array, is programmable through an I2C interface, and outputs image data
> +  through MIPI CSI-2.
> +
> +allOf:
> +  - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> +  compatible:
> +    const: sony,imx471
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: External input clock (19.2 MHz)
> +    maxItems: 1
> +
> +  vana-supply:
> +    description: Analog power supply (2.8 V)
> +
> +  vdig-supply:
> +    description: Digital core power supply (1.05 V)
> +
> +  vif-supply:
> +    description: I/O interface power supply (1.8 V)
> +
> +  reset-gpios:
> +    description: Sensor reset (XCLR) GPIO
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    unevaluatedProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            items:
> +              - const: 1
> +              - const: 2
> +              - const: 3
> +              - const: 4

The sensor also supports two-lane operation.

> +
> +          link-frequencies:
> +            maxItems: 1
> +            items:
> +              const: 200000000

The sensor isn't limited to 200 MHz, is it? I just wouldn't specify it at
all.

> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +    required:
> +      - endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - vana-supply
> +  - vdig-supply
> +  - vif-supply
> +  - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,camcc-sc7280.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        camf_imx471: camera@1a {
> +            compatible = "sony,imx471";
> +            reg = <0x1a>;
> +
> +            vana-supply = <&vreg_camf_vana_2p8>;
> +            vdig-supply = <&vreg_camf_vdig_1p1>;
> +            vif-supply = <&vreg_cam_vio_1p8>;
> +
> +            clocks = <&camcc CAM_CC_MCLK0_CLK>;
> +            assigned-clocks = <&camcc CAM_CC_MCLK0_CLK>;
> +            assigned-clock-rates = <19200000>;
> +
> +            reset-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
> +            pinctrl-0 = <&cam_mclk0_default>;
> +            pinctrl-names = "default";
> +
> +            orientation = <0>;
> +            rotation = <270>;
> +
> +            port {
> +                camera_imx471_ep: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <200000000>;
> +                    remote-endpoint = <&csiphy0_ep>;
> +                };
> +            };
> +        };
> +    };
> +...
> 

-- 
Regards,

Sakari Ailus

  reply	other threads:[~2026-08-06 10:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05 19:54 [PATCH 0/4] Add front-facing camera support for Nothing Phone (1) Danila Tikhonov
2026-08-05 19:54 ` [PATCH 1/4] dt-bindings: media: i2c: Add Sony IMX471 CMOS Image Sensor Danila Tikhonov
2026-08-06 10:33   ` Sakari Ailus [this message]
2026-08-05 19:54 ` [PATCH 2/4] drivers: media: i2c: imx471: Add vdig and vif power supplies Danila Tikhonov
2026-08-05 19:54 ` [PATCH 3/4] drivers: media: i2c: imx471: Add Device Tree matching support Danila Tikhonov
2026-08-05 20:37   ` sashiko-bot
2026-08-05 19:54 ` [PATCH 4/4] arm64: dts: qcom: sm7325-nothing-spacewar: Add front camera support Danila Tikhonov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=anRjAhAhFBWfgxvV@kekkonen.localdomain \
    --to=sakari.ailus@linux.intel.com \
    --cc=achill@achill.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=danila@mainlining.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fekz115@gmail.com \
    --cc=hpa@redhat.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=luca.weiss@fairphone.com \
    --cc=mchehab@kernel.org \
    --cc=neko@altlinux.org \
    --cc=robh@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox