Re: [PATCH v3 3/4] iio: accel: mma8452: Only apply trigger type when not set by firmware

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Wed, Aug 05, 2026 at 09:21:37AM +0200, Esben Haabendal wrote:
> Instead of unconditionally overriding the trigger type, it is better to
> only apply a default when no trigger type is set by firmware. This should
> be reasonably backward compatible, and should only potentially cause
> problems if systems exist where firmware specifies an incorrect trigger
> type. With a bit of luck, there are no such systems.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

...

>  	if (client->irq) {
> +		unsigned long irq_flags;
> +
> +		irq_flags = irq_get_trigger_type(client->irq);
> +		if (irq_flags == IRQ_TYPE_NONE)
> +			irq_flags = IRQF_TRIGGER_LOW;

I would even add info message or so that FW lacks of the proper IRQ type.
But it's up to you, most of the code that I saw and does something similar
does not print anything in this case.

> +		irq_flags |= IRQF_ONESHOT;
>  		ret = request_threaded_irq(client->irq, NULL, mma8452_interrupt,
> -					   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> -					   client->name, indio_dev);
> +					   irq_flags, client->name, indio_dev);

-- 
With Best Regards,
Andy Shevchenko