Re: [PATCH v2 0/3] Add CCI and CAMSS support for SM8750

[Bjorn Andersson <andersson@kernel.org>]

On Thu, Jun 18, 2026 at 05:03:49AM -0700, Hangxiang Ma wrote:
> This series adds CCI and CAMSS support for Qualcomm SM8750 SoC.
> 
> This series has been tested using the following commands with a downstream
> driver for S5KJN5 sensor.
> - media-ctl --reset
> - media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
> - media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
> - media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
> - media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
> - media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> - yavta  --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F  /dev/video0
> 
> Driver and dt-binding are waiting to be merged:
> https://lore.kernel.org/all/20260601-add-support-for-camss-on-sm8750-v5-0-dac36a190de8@oss.qualcomm.com/
> 

I don't see any progress on that dependency, so I'm rejecting this
series due to inactivity. Please send v3 once all dependencies has been
accepted and this has been validated on top.

Thanks,
Bjorn

> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
> ---
> Changes in v2:
> - Fix typo for mclk2 and mclk4 tlmm function
> - Link to v1: https://lore.kernel.org/r/20260519-pakala-camera-v1-0-b6d897864916@oss.qualcomm.com
> 
> ---
> Hangxiang Ma (3):
>       arm64: dts: qcom: sm8750: Add camss node
>       arm64: dts: qcom: sm8750: Add CCI definitions
>       arm64: dts: qcom: sm8750: Add camera MCLK pinctrl
> 
>  arch/arm64/boot/dts/qcom/sm8750.dtsi | 541 +++++++++++++++++++++++++++++++++++
>  1 file changed, 541 insertions(+)
> ---
> base-commit: fb80987f81756cb697a01362654a8e55fb505600
> change-id: 20260518-pakala-camera-bf03e3df1db8
> 
> Best regards,
> -- 
> Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
>