public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Jerome Brunet <jbrunet@baylibre.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	Kevin Hilman <khilman@baylibre.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	Mark Brown <broonie@kernel.org>
Subject: Applied "ASoC: meson: gx: add sound card support" to the asoc tree
Date: Thu, 13 Feb 2020 20:57:55 +0000	[thread overview]
Message-ID: <applied-20200213155159.3235792-10-jbrunet@baylibre.com> (raw)
In-Reply-To: <20200213155159.3235792-10-jbrunet@baylibre.com>

The patch

   ASoC: meson: gx: add sound card support

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From e37a0c313a0f8ba0b8de9c30db98fbc77bd8d446 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Thu, 13 Feb 2020 16:51:59 +0100
Subject: [PATCH] ASoC: meson: gx: add sound card support

Add support for the sound card used on the amlogic GX SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200213155159.3235792-10-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/meson/Kconfig   |   7 ++
 sound/soc/meson/Makefile  |   2 +
 sound/soc/meson/gx-card.c | 141 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 150 insertions(+)
 create mode 100644 sound/soc/meson/gx-card.c

diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index 347fa78e309a..22d2af75b59e 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -101,6 +101,13 @@ config SND_MESON_CARD_UTILS
 config SND_MESON_CODEC_GLUE
 	tristate
 
+config SND_MESON_GX_SOUND_CARD
+	tristate "Amlogic GX Sound Card Support"
+	select SND_MESON_CARD_UTILS
+	imply SND_MESON_AIU
+	help
+	  Select Y or M to add support for the GXBB/GXL SoC sound card
+
 config SND_MESON_G12A_TOHDMITX
 	tristate "Amlogic G12A To HDMI TX Control Support"
 	select REGMAP_MMIO
diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile
index bef2b72fd7a7..f9c90c391498 100644
--- a/sound/soc/meson/Makefile
+++ b/sound/soc/meson/Makefile
@@ -21,6 +21,7 @@ snd-soc-meson-axg-spdifout-objs := axg-spdifout.o
 snd-soc-meson-axg-pdm-objs := axg-pdm.o
 snd-soc-meson-card-utils-objs := meson-card-utils.o
 snd-soc-meson-codec-glue-objs := meson-codec-glue.o
+snd-soc-meson-gx-sound-card-objs := gx-card.o
 snd-soc-meson-g12a-tohdmitx-objs := g12a-tohdmitx.o
 
 obj-$(CONFIG_SND_MESON_AIU) += snd-soc-meson-aiu.o
@@ -37,4 +38,5 @@ obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o
 obj-$(CONFIG_SND_MESON_AXG_PDM) += snd-soc-meson-axg-pdm.o
 obj-$(CONFIG_SND_MESON_CARD_UTILS) += snd-soc-meson-card-utils.o
 obj-$(CONFIG_SND_MESON_CODEC_GLUE) += snd-soc-meson-codec-glue.o
+obj-$(CONFIG_SND_MESON_GX_SOUND_CARD) += snd-soc-meson-gx-sound-card.o
 obj-$(CONFIG_SND_MESON_G12A_TOHDMITX) += snd-soc-meson-g12a-tohdmitx.o
diff --git a/sound/soc/meson/gx-card.c b/sound/soc/meson/gx-card.c
new file mode 100644
index 000000000000..7b01dcb73e5e
--- /dev/null
+++ b/sound/soc/meson/gx-card.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "meson-card.h"
+
+struct gx_dai_link_i2s_data {
+	unsigned int mclk_fs;
+};
+
+/*
+ * Base params for the codec to codec links
+ * Those will be over-written by the CPU side of the link
+ */
+static const struct snd_soc_pcm_stream codec_params = {
+	.formats = SNDRV_PCM_FMTBIT_S24_LE,
+	.rate_min = 5525,
+	.rate_max = 192000,
+	.channels_min = 1,
+	.channels_max = 8,
+};
+
+static int gx_card_i2s_be_hw_params(struct snd_pcm_substream *substream,
+				    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct meson_card *priv = snd_soc_card_get_drvdata(rtd->card);
+	struct gx_dai_link_i2s_data *be =
+		(struct gx_dai_link_i2s_data *)priv->link_data[rtd->num];
+
+	return meson_card_i2s_set_sysclk(substream, params, be->mclk_fs);
+}
+
+static const struct snd_soc_ops gx_card_i2s_be_ops = {
+	.hw_params = gx_card_i2s_be_hw_params,
+};
+
+static int gx_card_parse_i2s(struct snd_soc_card *card,
+			     struct device_node *node,
+			     int *index)
+{
+	struct meson_card *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai_link *link = &card->dai_link[*index];
+	struct gx_dai_link_i2s_data *be;
+
+	/* Allocate i2s link parameters */
+	be = devm_kzalloc(card->dev, sizeof(*be), GFP_KERNEL);
+	if (!be)
+		return -ENOMEM;
+	priv->link_data[*index] = be;
+
+	/* Setup i2s link */
+	link->ops = &gx_card_i2s_be_ops;
+	link->dai_fmt = meson_card_parse_daifmt(node, link->cpus->of_node);
+
+	of_property_read_u32(node, "mclk-fs", &be->mclk_fs);
+
+	return 0;
+}
+
+static int gx_card_cpu_identify(struct snd_soc_dai_link_component *c,
+				char *match)
+{
+	if (of_device_is_compatible(c->of_node, DT_PREFIX "aiu")) {
+		if (strstr(c->dai_name, match))
+			return 1;
+	}
+
+	/* dai not matched */
+	return 0;
+}
+
+static int gx_card_add_link(struct snd_soc_card *card, struct device_node *np,
+			    int *index)
+{
+	struct snd_soc_dai_link *dai_link = &card->dai_link[*index];
+	struct snd_soc_dai_link_component *cpu;
+	int ret;
+
+	cpu = devm_kzalloc(card->dev, sizeof(*cpu), GFP_KERNEL);
+	if (!cpu)
+		return -ENOMEM;
+
+	dai_link->cpus = cpu;
+	dai_link->num_cpus = 1;
+
+	ret = meson_card_parse_dai(card, np, &dai_link->cpus->of_node,
+				   &dai_link->cpus->dai_name);
+	if (ret)
+		return ret;
+
+	if (gx_card_cpu_identify(dai_link->cpus, "FIFO"))
+		ret = meson_card_set_fe_link(card, dai_link, np, true);
+	else
+		ret = meson_card_set_be_link(card, dai_link, np);
+
+	if (ret)
+		return ret;
+
+	/* Check if the cpu is the i2s encoder and parse i2s data */
+	if (gx_card_cpu_identify(dai_link->cpus, "I2S Encoder"))
+		ret = gx_card_parse_i2s(card, np, index);
+
+	/* Or apply codec to codec params if necessary */
+	else if (gx_card_cpu_identify(dai_link->cpus, "CODEC CTRL"))
+		dai_link->params = &codec_params;
+
+	return ret;
+}
+
+static const struct meson_card_match_data gx_card_match_data = {
+	.add_link = gx_card_add_link,
+};
+
+static const struct of_device_id gx_card_of_match[] = {
+	{
+		.compatible = "amlogic,gx-sound-card",
+		.data = &gx_card_match_data,
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, gx_card_of_match);
+
+static struct platform_driver gx_card_pdrv = {
+	.probe = meson_card_probe,
+	.remove = meson_card_remove,
+	.driver = {
+		.name = "gx-sound-card",
+		.of_match_table = gx_card_of_match,
+	},
+};
+module_platform_driver(gx_card_pdrv);
+
+MODULE_DESCRIPTION("Amlogic GX ALSA machine driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1


      reply	other threads:[~2020-02-13 20:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-13 15:51 [PATCH 0/9] ASoC: meson: gx: add audio output support Jerome Brunet
2020-02-13 15:51 ` [PATCH 1/9] ASoC: core: allow a dt node to provide several components Jerome Brunet
2020-02-13 17:18   ` Mark Brown
2020-02-13 17:37     ` Jerome Brunet
2020-02-13 17:40       ` Mark Brown
2020-02-13 20:58   ` Applied "ASoC: core: allow a dt node to provide several components" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 2/9] ASoC: meson: g12a: extract codec-to-codec utils Jerome Brunet
2020-02-13 20:58   ` Applied "ASoC: meson: g12a: extract codec-to-codec utils" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 3/9] ASoC: meson: aiu: add audio output dt-bindings Jerome Brunet
2020-02-13 20:58   ` Applied "ASoC: meson: aiu: add audio output dt-bindings" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 4/9] ASoC: meson: aiu: add i2s and spdif support Jerome Brunet
2020-02-13 20:58   ` Applied "ASoC: meson: aiu: add i2s and spdif support" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 5/9] ASoC: meson: aiu: add hdmi codec control support Jerome Brunet
2020-02-13 18:21   ` Mark Brown
2020-02-14 13:16     ` Jerome Brunet
2020-02-14 13:22       ` Mark Brown
2020-02-13 20:58   ` Applied "ASoC: meson: aiu: add hdmi codec control support" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 6/9] ASoC: meson: aiu: add internal dac codec control support Jerome Brunet
2020-02-13 20:58   ` Applied "ASoC: meson: aiu: add internal dac codec control support" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 7/9] ASoC: meson: axg: extract sound card utils Jerome Brunet
2020-02-13 20:58   ` Applied "ASoC: meson: axg: extract sound card utils" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 8/9] ASoC: meson: gx: add sound card dt-binding documentation Jerome Brunet
2020-02-13 20:58   ` Applied "ASoC: meson: gx: add sound card dt-binding documentation" to the asoc tree Mark Brown
2020-02-13 15:51 ` [PATCH 9/9] ASoC: meson: gx: add sound card support Jerome Brunet
2020-02-13 20:57   ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=applied-20200213155159.3235792-10-jbrunet@baylibre.com \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox