> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: > - [Medium] The 'gpio-controller' and '#gpio-cells' properties were added to the binding to document GPIO provider capabilities, but were not added to the 'required' list. > -- > > commit 167159eda5a6932cbffa6730117f8dd7e23b2970 > Author: Lorenzo Bianconi > > dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller > > This commit documents the embedded GPIO controller within the TC9563 PCIe > switch. It adds gpio-controller and #gpio-cells properties to the device > tree binding, along with the reset-gpios property for the downstream port. > > > diff --git a/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml > > index f084830c6d0cb..c4cd162cb084b 100644 > > --- a/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml > > +++ b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml > > @@ -31,6 +31,11 @@ properties: > > description: > > GPIO controlling the RESX# pin. > > > > + gpio-controller: true > > + > > + '#gpio-cells': > > + const: 2 > > + > > [Severity: Medium] > Should gpio-controller and #gpio-cells be added to the required list? > > Looking at the required list in > Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml around line 108, > these newly added GPIO provider capabilities are missing: > > required: > - resx-gpios > - vdd18-supply > - vdd09-supply > - vddc-supply > > Without being added to the required list, device trees with incomplete > configurations (missing the newly added GPIO controller properties) will > silently pass schema validation when running dt_binding_check or dtbs_check. ack, I will fix it in v4. Regards, Lorenzo > > -- > Sashiko AI review · https://sashiko.dev/#/patchset/20260904-pci-tc9563-aux-v3-0-5b1449d62ba2@oss.qualcomm.com?part=1