Hi all,

running dtb_checks with current Linux git and dt-schema git, I get this
warning:

  DTC [C] arch/arm/boot/dts/renesas/r8a7790-lager.dtb
arch/arm/boot/dts/renesas/r8a7790-lager.dtb: i2c-mux1 (i2c-demux-pinctrl): i2c-parent:0: [99, 100] is too long
	from schema $id: http://devicetree.org/schemas/i2c/i2c-demux-pinctrl.yaml
arch/arm/boot/dts/renesas/r8a7790-lager.dtb: i2c-mux1 (i2c-demux-pinctrl): i2c-parent: [[99, 100]] is too short
	from schema $id: http://devicetree.org/schemas/i2c/i2c-demux-pinctrl.yaml

(and a couple of more like this in i2c-demux nodes)

This is how "i2c-parent" is described in the YAML file:

  i2c-parent:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    minItems: 2
    items:
      maxItems: 1
    description:
      List of phandles of I2C masters available for selection.  The first one
      will be used as default.

where Rob added the constraints for the phandle-array with:

37534121c4e4 ("dt-bindings: Fix phandle-array constraints, again")
91f9a47ddb9d ("dt-bindings: i2c: mux: i2c-demux-pinctrl: Define "i2c-parent" constraints")

I think the DT describes it correctly:

        i2cexio0: i2c-mux1 {
                compatible = "i2c-demux-pinctrl";
                i2c-parent = <&iic0>, <&i2c0>;
                i2c-bus-name = "i2c-exio0";
                #address-cells = <1>;
                #size-cells = <0>;
        };

Is this a false positive because the checker cannot distinguish between
two values with one cell and one value with two cells? I think a
potential fix belongs to the checker ideally, but maybe I am wrong and
need to annotate the DT?

Thank you for your help,

   Wolfram