On Thu, Oct 29, 2026 at 12:32:07PM +0900, Mikko Perttunen wrote: > While the integrated GB10B GPU on Tegra264 is on the PCI bus, it > requires a BPMP power domain to be enabled or it won't enumerate on the > bus. Therefore, describe it and the power domain in the device tree to > allow the power domain to be enabled prior to enumeration. > > Signed-off-by: Mikko Perttunen > --- > arch/arm64/boot/dts/nvidia/tegra264.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi > index 5ab34cd09a3d..4c8b320ecc40 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi > @@ -3597,6 +3597,12 @@ pcie@0 { > #address-cells = <3>; > #size-cells = <2>; > ranges; > + > + gpu@0 { > + compatible = "pci10de,2b00"; > + reg = <0x00010000 0x0 0x0 0x0 0x0>; > + power-domains = <&bpmp TEGRA264_POWER_DOMAIN_GPU>; > + }; My understanding is that the GPU is the only device on this PCI bus, so wouldn't it be simpler to add the power-domains property to the bus' DT node? I guess that's just another interpretation of how this hardware works, and I like how this power control for PCI devices allows individual devices to be turned on before the bus probes (there's a case like this on Jetson Nano where Ethernet needs a GPIO pin to be pulled up in order to start enumerating on the PCI bus, though I don't remember how we ended up solving that, sources don't have any indication of that GPIO being permanently set high or something). Thierry