[PATCH v3 0/2] Add support for MediaTek AHCI SATA

[PATCH v3 0/2] Add support for MediaTek AHCI SATA

[Ryder Lee]

Hi,

This patch series add support for AHCI compatible SATA controller, and it is
compliant with the ahci 1.3 and sata 3.0 specification. This driver is slightly
different than ahci_platform.c (e.g., reset control, subsystem setting).

changes since v3:
- update binding text: fix a typo and modify compatible strings.

changes since v2:
- according to Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines").
  replace devm_reset_control_get_optional() by devm_reset_control_get_optional_exclusive().

changes since v1:
- update binding text: add missing "specifier pairs" descriptions.
- fix kbuild test warning: fix the error handling.

Ryder Lee (2):
  ata: mediatek: add support for MediaTek SATA controller
  dt-bindings: ata: add DT bindings for MediaTek SATA controller

 Documentation/devicetree/bindings/ata/ahci-mtk.txt |  51 ++++++
 drivers/ata/Kconfig                                |  10 ++
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci_mtk.c                             | 196 +++++++++++++++++++++
 4 files changed, 258 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
 create mode 100644 drivers/ata/ahci_mtk.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/2] ata: mediatek: add support for MediaTek SATA controller

[Ryder Lee]

This adds support the AHCI-compliant Serial ATA controller present
on MediaTek SoCs.

Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/ata/Kconfig    |  10 +++
 drivers/ata/Makefile   |   1 +
 drivers/ata/ahci_mtk.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 207 insertions(+)
 create mode 100644 drivers/ata/ahci_mtk.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 363fc53..488c937 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -153,6 +153,16 @@ config AHCI_CEVA
 
 	  If unsure, say N.
 
+config AHCI_MTK
+	tristate "MediaTek AHCI SATA support"
+	depends on ARCH_MEDIATEK
+	select MFD_SYSCON
+	help
+	  This option enables support for the MediaTek SoC's
+	  onboard AHCI SATA controller.
+
+	  If unsure, say N.
+
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a26ef5a..ff9cd2e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_CEVA)		+= ahci_ceva.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DM816)	+= ahci_dm816.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_MTK)		+= ahci_mtk.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_MVEBU)	+= ahci_mvebu.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_OCTEON)	+= ahci_octeon.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c
new file mode 100644
index 0000000..80854f7
--- /dev/null
+++ b/drivers/ata/ahci_mtk.c
@@ -0,0 +1,196 @@
+/*
+ * MeidaTek AHCI SATA driver
+ *
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "ahci.h"
+
+#define DRV_NAME		"ahci"
+
+#define SYS_CFG			0x14
+#define SYS_CFG_SATA_MSK	GENMASK(31, 30)
+#define SYS_CFG_SATA_EN		BIT(31)
+
+struct mtk_ahci_plat {
+	struct regmap *mode;
+	struct reset_control *axi_rst;
+	struct reset_control *sw_rst;
+	struct reset_control *reg_rst;
+};
+
+static const struct ata_port_info ahci_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_platform_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT(DRV_NAME),
+};
+
+static int mtk_ahci_platform_resets(struct ahci_host_priv *hpriv,
+				    struct device *dev)
+{
+	struct mtk_ahci_plat *plat = hpriv->plat_data;
+	int err;
+
+	/* reset AXI bus and PHY part */
+	plat->axi_rst = devm_reset_control_get_optional_exclusive(dev, "axi");
+	if (PTR_ERR(plat->axi_rst) == -EPROBE_DEFER)
+		return PTR_ERR(plat->axi_rst);
+
+	plat->sw_rst = devm_reset_control_get_optional_exclusive(dev, "sw");
+	if (PTR_ERR(plat->sw_rst) == -EPROBE_DEFER)
+		return PTR_ERR(plat->sw_rst);
+
+	plat->reg_rst = devm_reset_control_get_optional_exclusive(dev, "reg");
+	if (PTR_ERR(plat->reg_rst) == -EPROBE_DEFER)
+		return PTR_ERR(plat->reg_rst);
+
+	err = reset_control_assert(plat->axi_rst);
+	if (err) {
+		dev_err(dev, "failed to assert AXI bus\n");
+		return err;
+	}
+
+	err = reset_control_assert(plat->sw_rst);
+	if (err) {
+		dev_err(dev, "failed to assert PHY digital part\n");
+		return err;
+	}
+
+	err = reset_control_assert(plat->reg_rst);
+	if (err) {
+		dev_err(dev, "failed to assert PHY register part\n");
+		return err;
+	}
+
+	err = reset_control_deassert(plat->reg_rst);
+	if (err) {
+		dev_err(dev, "failed to deassert PHY register part\n");
+		return err;
+	}
+
+	err = reset_control_deassert(plat->sw_rst);
+	if (err) {
+		dev_err(dev, "failed to deassert PHY digital part\n");
+		return err;
+	}
+
+	err = reset_control_deassert(plat->axi_rst);
+	if (err) {
+		dev_err(dev, "failed to deassert AXI bus\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int mtk_ahci_parse_property(struct ahci_host_priv *hpriv,
+				   struct device *dev)
+{
+	struct mtk_ahci_plat *plat = hpriv->plat_data;
+	struct device_node *np = dev->of_node;
+
+	/* enable SATA function if needed */
+	if (of_find_property(np, "mediatek,phy-mode", NULL)) {
+		plat->mode = syscon_regmap_lookup_by_phandle(
+					np, "mediatek,phy-mode");
+		if (IS_ERR(plat->mode)) {
+			dev_err(dev, "missing phy-mode phandle\n");
+			return PTR_ERR(plat->mode);
+		}
+
+		regmap_update_bits(plat->mode, SYS_CFG, SYS_CFG_SATA_MSK,
+				   SYS_CFG_SATA_EN);
+	}
+
+	of_property_read_u32(np, "ports-implemented", &hpriv->force_port_map);
+
+	return 0;
+}
+
+static int mtk_ahci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_ahci_plat *plat;
+	struct ahci_host_priv *hpriv;
+	int err;
+
+	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return -ENOMEM;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	hpriv->plat_data = plat;
+
+	err = mtk_ahci_parse_property(hpriv, dev);
+	if (err)
+		return err;
+
+	err = mtk_ahci_platform_resets(hpriv, dev);
+	if (err)
+		return err;
+
+	err = ahci_platform_enable_resources(hpriv);
+	if (err)
+		return err;
+
+	err = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+				      &ahci_platform_sht);
+	if (err)
+		goto disable_resources;
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+	return err;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+			 ahci_platform_resume);
+
+static const struct of_device_id ahci_of_match[] = {
+	{ .compatible = "mediatek,mtk-ahci", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static struct platform_driver mtk_ahci_driver = {
+	.probe = mtk_ahci_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = ahci_of_match,
+		.pm = &ahci_pm_ops,
+	},
+};
+module_platform_driver(mtk_ahci_driver);
+
+MODULE_DESCRIPTION("MeidaTek SATA AHCI Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 1/2] ata: mediatek: add support for MediaTek SATA controller

[Tejun Heo]

On Sat, Aug 12, 2017 at 09:31:03AM +0800, Ryder Lee wrote:
> This adds support the AHCI-compliant Serial ATA controller present
> on MediaTek SoCs.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

Looks good to me.

 Acked-by: Tejun Heo <tj@kernel.org>

If others are okay with it, please let me know how the patches should
be routed.  I can push both through libata, both can be routed through
dt tree, or we can handle them separately.

Thanks.

-- 
tejun

Re: [PATCH v3 1/2] ata: mediatek: add support for MediaTek SATA controller

[Matthias Brugger]

On 08/13/2017 08:38 PM, Tejun Heo wrote:
> On Sat, Aug 12, 2017 at 09:31:03AM +0800, Ryder Lee wrote:
>> This adds support the AHCI-compliant Serial ATA controller present
>> on MediaTek SoCs.
>>
>> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> 
> Looks good to me.
> 
>   Acked-by: Tejun Heo <tj@kernel.org>
> 
> If others are okay with it, please let me know how the patches should
> be routed.  I can push both through libata, both can be routed through
> dt tree, or we can handle them separately.
> 

Please take the device tree bindings through your tree as well.
You might want to wait for a Ack from a device tree maintainer though.

Thanks,
Matthias

[PATCH v3 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller

[Ryder Lee]

Add DT bindings for the onboard SATA controller present on the MediaTek
SoCs.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 Documentation/devicetree/bindings/ata/ahci-mtk.txt | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt

diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
new file mode 100644
index 0000000..96c8d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
@@ -0,0 +1,51 @@
+MediaTek Serial ATA controller
+
+Required properties:
+ - compatible	   : Must be "mediatek,soc-model-ahci", "mediatek,mtk-ahci".
+		     When using "mediatek,mtk-ahci" compatible strings, you
+		     need SoC specific ones in addition, one of:
+		     - "mediatek,mt7622-ahci"
+ - reg		   : Physical base addresses and length of register sets.
+ - interrupts	   : Interrupt associated with the SATA device.
+ - interrupt-names : Associated name must be: "hostc".
+ - clocks	   : A list of phandle and clock specifier pairs, one for each
+		     entry in clock-names.
+ - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
+ - phys		   : A phandle and PHY specifier pair for the PHY port.
+ - phy-names	   : Associated name must be: "sata-phy".
+ - ports-implemented : See ./ahci-platform.txt for details.
+
+Optional properties:
+ - power-domains   : A phandle and power domain specifier pair to the power
+		     domain which is responsible for collapsing and restoring
+		     power to the peripheral.
+ - resets	   : Must contain an entry for each entry in reset-names.
+		     See ../reset/reset.txt for details.
+ - reset-names	   : Associated names must be: "axi", "sw", "reg".
+ - mediatek,phy-mode : A phandle to the system controller, used to enable
+		       SATA function.
+
+Example:
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,mt7622-ahci",
+			     "mediatek,mtk-ahci";
+		reg = <0 0x1a200000 0 0x1100>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		clocks = <&pciesys CLK_SATA_AHB_EN>,
+			 <&pciesys CLK_SATA_AXI_EN>,
+			 <&pciesys CLK_SATA_ASIC_EN>,
+			 <&pciesys CLK_SATA_RBC_EN>,
+			 <&pciesys CLK_SATA_PM_EN>;
+		clock-names = "ahb", "axi", "asic", "rbc", "pm";
+		phys = <&u3port1 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			 <&pciesys MT7622_SATA_PHY_SW_RST>,
+			 <&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi", "sw", "reg";
+		mediatek,phy-mode = <&pciesys>;
+	};
-- 
1.9.1

Re: [PATCH v3 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller

[Rob Herring]

On Sat, Aug 12, 2017 at 09:31:04AM +0800, Ryder Lee wrote:
> Add DT bindings for the onboard SATA controller present on the MediaTek
> SoCs.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
>  Documentation/devicetree/bindings/ata/ahci-mtk.txt | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
> new file mode 100644
> index 0000000..96c8d22
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
> @@ -0,0 +1,51 @@
> +MediaTek Serial ATA controller
> +
> +Required properties:
> + - compatible	   : Must be "mediatek,soc-model-ahci", "mediatek,mtk-ahci".

Instead of "soc-model", pick something checkpatch.pl understands. IIRC, 
"<chip>" is one.

With that,

Acked-by: Rob Herring <robh@kernel.org>