Re: [PATCH v2 2/3] dt-bindings: hwmon: Add binding for max6639

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 11/10/2022 06:47, Naresh Solanki wrote:
> From: Marcello Sylvester Bauer <sylv@sylv.io>
> 
> Add Devicetree binding documentation for Maxim MAX6639 temperature
> monitor with PWM fan-speed controller.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
>  .../bindings/hwmon/maxim,max6639.yaml         | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml
> new file mode 100644
> index 000000000000..bbefb0a57ab3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim max6639
> +
> +maintainers:
> +  - Roland Stigge <stigge@antcom.de>
> +
> +description: |
> +  The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM
> +  fan-speed controller.  It monitors its own temperature and one external
> +  diode-connected transistor or the temperatures of two external diode-connected
> +  transistors, typically available in CPUs, FPGAs, or GPUs.
> +
> +  Datasheets:
> +    https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - maxim,max6639
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +
> +patternProperties:
> +  "^ot[0-1]_indication$":

No underscores in names.

> +    type: boolean
> +    default: false
> +    description:
> +      If true then enable OT pin indication.

Description copies the name of property. Not really useful. Describe
that it does.

Why this has 0 and 1 numbers? Isn't it connected with fan?

> +
> +  "^therm[0-1]_indication$":
> +    type: boolean
> +    default: false
> +    description:
> +      If true then enable THERM pin indication.

Ditto

> +
> +  "^fan@[0-1]$":

[01]
The same in other cases.

> +    type: object
> +    description: |
> +      Represents the two fans and their specific configuration.
> +
> +    $ref: fan-common.yaml#
> +
> +    properties:
> +      reg:
> +        description: |
> +          The fan number.
> +        items:
> +          minimum: 0
> +          maximum: 1
> +
> +      maxim,fan-spin-up:
> +        type: boolean
> +        description:
> +          If true then whnever the fan starts up from zero drive, it

whenever
run spell-check

> +          is driven with 100% duty cycle for 2s to ensure that it
> +          starts.
> +
> +      maxim,full-speed-on-therm:
> +        type: boolean
> +        description:
> +          If true then force fan to full speed if THERM pin goes low.
> +
> +      maxim,fanfail_indication:

No underscores

> +        type: boolean
> +        description:
> +          If true then enable fanfail pin indication.

Missing blank line

> +    required:
> +      - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      max6639@10 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +        compatible = "maxim,max6639";
> +        reg = <0x10>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        fan@0 {
> +          reg = <0x0>;
> +          pulses-per-revolution = <2>;
> +          max-rpm = <4000>;
> +          pwm-frequency = <25000>;
> +        };
> +
> +        fan@1 {
> +          reg = <0x1>;
> +          pulses-per-revolution = <2>;
> +          max-rpm = <32000>;
> +          pwm-frequency = <25000>;
> +        };
> +      };
> +    };
> +...

Best regards,
Krzysztof