From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: Can Guo <cang@codeaurora.org>,
subhashj@codeaurora.org, asutoshd@codeaurora.org,
mgautam@codeaurora.org, kishon@ti.com, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 1/2] phy: Add QMP phy based UFS phy support for sdm845
Date: Mon, 9 Apr 2018 16:58:48 +0530 [thread overview]
Message-ID: <b05ea9ac-302e-9381-94dd-00abd2099b60@codeaurora.org> (raw)
In-Reply-To: <20180327071838.11168-2-cang@codeaurora.org>
Hi Can,
On 3/27/2018 12:48 PM, Can Guo wrote:
> Add UFS PHY support to make SDM845 UFS work with common PHY framework.
>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 130 +++++++++++++++++++++++++++++++++---
> drivers/phy/qualcomm/phy-qcom-qmp.h | 8 +++
> 2 files changed, 127 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 5cf2c3c..0b58030 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -156,6 +156,11 @@ enum qphy_reg_layout {
> [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
> };
>
> +static const unsigned int sdm845_ufsphy_regs_layout[] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> @@ -601,6 +606,73 @@ enum qphy_reg_layout {
> QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
> };
>
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> struct qmp_phy_cfg {
> @@ -652,6 +724,9 @@ struct qmp_phy_cfg {
> /* Register offset of secondary tx/rx lanes for USB DP combo PHY */
> unsigned int tx_b_lane_offset;
> unsigned int rx_b_lane_offset;
> +
> + /* true, if PCS block has no separate SW_RESET register */
> + bool skip_sw_rst;
> };
>
> /**
> @@ -748,6 +823,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> "aux", "cfg_ahb", "ref", "com_aux",
> };
>
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> + "ref",
did you miss adding 'ref_aux' clock here as in the v2 version?
Rest looks good. After this change, you can add my reviewed-by
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Thanks
Vivek
> +};
> +
> /* list of resets */
> static const char * const msm8996_pciephy_reset_l[] = {
> "phy", "common", "cfg",
> @@ -758,7 +837,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> };
>
> /* list of regulators */
> -static const char * const msm8996_phy_vreg_l[] = {
> +static const char * const qmp_phy_vreg_l[] = {
> "vdda-phy", "vdda-pll",
> };
>
> @@ -778,8 +857,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> .reset_list = msm8996_pciephy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
> - .vreg_list = msm8996_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = pciephy_regs_layout,
>
> .start_ctrl = PCS_START | PLL_READY_GATE_EN,
> @@ -809,8 +888,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = msm8996_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = usb3phy_regs_layout,
>
> .start_ctrl = SERDES_START | PCS_START,
> @@ -870,8 +949,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = msm8996_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout,
>
> .start_ctrl = SERDES_START | PCS_START,
> @@ -903,8 +982,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = msm8996_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout,
>
> .start_ctrl = SERDES_START | PCS_START,
> @@ -916,6 +995,30 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
> };
>
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> + .tx_tbl = sdm845_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> + .rx_tbl = sdm845_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> + .clk_list = sdm845_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sdm845_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .mask_pcs_ready = PCS_READY,
> + .skip_sw_rst = true,
> +};
> +
> static void qcom_qmp_phy_configure(void __iomem *base,
> const unsigned int *regs,
> const struct qmp_phy_init_tbl tbl[],
> @@ -1140,7 +1243,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
> usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
>
> /* Pull PHY out of reset state */
> - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + if (!cfg->skip_sw_rst)
> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> if (cfg->has_phy_dp_com_ctrl)
> qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
>
> @@ -1178,7 +1282,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
> clk_disable_unprepare(qphy->pipe_clk);
>
> /* PHY reset */
> - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + if (!cfg->skip_sw_rst)
> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> /* stop SerDes and Phy-Coding-Sublayer */
> qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> @@ -1531,6 +1636,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
> }, {
> .compatible = "qcom,sdm845-qmp-usb3-uni-phy",
> .data = &qmp_v3_usb3_uniphy_cfg,
> + }, {
> + .compatible = "qcom,sdm845-qmp-ufs-phy",
> + .data = &sdm845_ufsphy_cfg,
> },
> { },
> };
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index 5d78d43..3cbcfe1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -184,6 +184,8 @@
> #define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8
> #define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc
> #define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100
> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104
> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108
> #define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c
> #define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120
> #define QSERDES_V3_COM_CLK_SELECT 0x138
> @@ -211,8 +213,13 @@
> /* Only for QMP V3 PHY - RX registers */
> #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
> #define QSERDES_V3_RX_UCDR_SO_GAIN 0x014
> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024
> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028
> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c
> #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030
> #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
> +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
> +#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044
> #define QSERDES_V3_RX_RX_TERM_BW 0x07c
> #define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc
> #define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0
> @@ -275,6 +282,7 @@
> #define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc
> #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0
> #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4
> +#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4
> #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8
> #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
> #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
next prev parent reply other threads:[~2018-04-09 11:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-27 7:18 [PATCH v3 0/2] Support for Qualcomm UFS QMP PHY on SDM845 Can Guo
2018-03-27 7:18 ` [PATCH v3 1/2] phy: Add QMP phy based UFS phy support for sdm845 Can Guo
2018-04-09 11:28 ` Vivek Gautam [this message]
2018-04-12 0:57 ` cang
2018-04-12 5:13 ` Vivek Gautam
2018-04-12 6:22 ` cang
2018-03-27 7:18 ` [PATCH v3 2/2] dt-bindings: phy-qcom-qmp: Add UFS phy compatible string " Can Guo
2018-04-09 11:31 ` Vivek Gautam
2018-04-09 18:39 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b05ea9ac-302e-9381-94dd-00abd2099b60@codeaurora.org \
--to=vivek.gautam@codeaurora.org \
--cc=asutoshd@codeaurora.org \
--cc=cang@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=subhashj@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).