devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Liu Ying <victor.liu@nxp.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: kishon@ti.com, vkoul@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com
Subject: Re: [PATCH 1/2] dt-bindings: phy: Add Freescale i.MX8qm Mixel LVDS PHY binding
Date: Mon, 20 Jun 2022 20:08:30 +0800	[thread overview]
Message-ID: <b067735796b36730e3ca4e63aa1be8cd899b9cac.camel@nxp.com> (raw)
In-Reply-To: <7c47bab1-cd64-cde1-a4cd-cca6514bc57f@linaro.org>

On Mon, 2022-06-20 at 12:38 +0200, Krzysztof Kozlowski wrote:
> On 20/06/2022 09:56, Liu Ying wrote:
> > On Mon, 2022-06-20 at 09:35 +0200, Krzysztof Kozlowski wrote:
> > > On 20/06/2022 05:06, Liu Ying wrote:
> > > > On Sun, 2022-06-19 at 14:11 +0200, Krzysztof Kozlowski wrote:
> > > > > On 18/06/2022 11:22, Liu Ying wrote:
> > > > > > This patch adds bindings for Mixel LVDS PHY found on
> > > > > > Freescale i.MX8qm SoC.
> > > > > > 
> > > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > > > > > ---
> > > > > >  .../bindings/phy/mixel,lvds-phy.yaml          | 64
> > > > > > +++++++++++++++++++
> > > > > >  1 file changed, 64 insertions(+)
> > > > > >  create mode 100644
> > > > > > Documentation/devicetree/bindings/phy/mixel,lvds-phy.yaml
> > > > > > diff --git
> > > > > > a/Documentation/devicetree/bindings/phy/mixel,lvds-
> > > > > > phy.yaml
> > > > > > b/Documentation/devicetree/bindings/phy/mixel,lvds-
> > > > > > phy.yaml
> > > > > > new file mode 100644
> > > > > > index 000000000000..de964ffb9356
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/phy/mixel,lvds-
> > > > > > phy.yaml
> > > > > > @@ -0,0 +1,64 @@
> > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > > +%YAML 1.2
> > > > > > +---
> > > > > > +$id: 
> > > > > > 
> > 
> > 
https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fphy%2Fmixel%2Clvds-phy.yaml%23&amp;data=05%7C01%7Cvictor.liu%40nxp.com%7C968d5a1e2f5c4ccdd77908da52a9148d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637913183390683087%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=h8JmjvGBnTcMn2Uk3CVgq%2BB4%2BlbCBA5iDD7OhtFZyZo%3D&amp;reserved=0
> > > > > > +$schema: 
> > > > > > 
> > 
> > 
https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=05%7C01%7Cvictor.liu%40nxp.com%7C968d5a1e2f5c4ccdd77908da52a9148d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637913183390683087%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=bLsmtGPC8tzZSHPqblHOhx0gnsgFHlKVu0P8dN6G15s%3D&amp;reserved=0
> > > > > > +
> > > > > > +title: Mixel LVDS PHY for Freescale i.MX8qm SoC
> > > > > 
> > > > > If Mixel is a vendor, it needs it's vendor prefix documented
> > > > > and
> > > > > used
> > > > > in
> > > > > compatible. Filename should match compatible. If it is not a
> > > > > vendor,
> > > > > then filename should be "fsl,imx8qm-lvds-phy.yaml"
> > > > 
> > > > Mixel is a vendor. I'll document the vendor prefix and set
> > > > 'fsl,imx8qm-lvds-phy' and 'mixel,lvds-phy' as compatible's
> > > > enum.
> > > > I'll keep the filename as-is.
> > > 
> > > mixel,lvds-phy is not a good compatible (and filename) because it
> > > is
> > > not
> > > specific about component version. Please use specific compatibles
> > > only
> > > thus also specific filename (filename should match first
> > > compatible).
> > 
> > All the information about component version I can find in the PHY
> > IP's
> > data sheet is '28FDSOI-LVDS-1250-8CH-TX-PLL'. '28FDSOI' looks like
> > the
> > technology name. Do you think the compatible name can be
> > 'mixel,lvds-1250-8ch-tx-pll'? Or, any better option?
> > 
> > If the compatible name is ok, does the below compabitle property
> > look
> > ok?
> > 
> > ===================8<==============
> >   compatible:
> >     enum:
> >       - mixel,lvds-1250-8ch-tx-pll
> >       - fsl,imx8qm-lvds-phy
> > ===================8<==============
> 
> 
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmixel.com%2Fwp-content%2Fmixel%2Fpdf%2F2018%2FMXL-LVDS-1250-8CH-TX-PLL_SS_28FDSOI.pdf&amp;data=05%7C01%7Cvictor.liu%40nxp.com%7C968d5a1e2f5c4ccdd77908da52a9148d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637913183390683087%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=PWK82Pf%2FbBti6PXNq9wvFbjM6QmnZWcj7bWSh2FYAzA%3D&amp;reserved=0
> 
> mentions entire name as a device name, so with 28FDSOI, but your
> choice
> is also good.

Will use the entire name with 28FDSOI.

Thanks,
Liu Ying


  reply	other threads:[~2022-06-20 12:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-18  9:21 [PATCH 0/2] phy: freescale: Add i.MX8qm Mixel LVDS PHY support Liu Ying
2022-06-18  9:22 ` [PATCH 1/2] dt-bindings: phy: Add Freescale i.MX8qm Mixel LVDS PHY binding Liu Ying
2022-06-19 12:11   ` Krzysztof Kozlowski
2022-06-20  3:06     ` Liu Ying
2022-06-20  7:35       ` Krzysztof Kozlowski
2022-06-20  7:56         ` Liu Ying
2022-06-20 10:38           ` Krzysztof Kozlowski
2022-06-20 12:08             ` Liu Ying [this message]
2022-06-18  9:22 ` [PATCH 2/2] phy: freescale: Add i.MX8qm Mixel LVDS PHY support Liu Ying
2022-06-19 12:15   ` Krzysztof Kozlowski
2022-06-20  3:08     ` Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b067735796b36730e3ca4e63aa1be8cd899b9cac.camel@nxp.com \
    --to=victor.liu@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kishon@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).