[PATCH v3 0/7] soundwire: qcom: add support for SM8550 (Soundwire v2.0.0)

[PATCH v3 0/7] soundwire: qcom: add support for SM8550 (Soundwire v2.0.0)

[Krzysztof Kozlowski]

Hi,

Changes since v2:
1. Use uint16 for qcom,ports-sinterval.
   DTS will be fixed in separate patchset.
2. Add tags.

Changes since v1:
1. Patch 1: Increase maxItems to 16 for port-related properties.
2. Re-order patch 1 and 2.
3. Patch 3: Drop unneeded semicolon.
4. Patch 5: Fix lang typo in subject.

Best regards,
Krzysztof

Krzysztof Kozlowski (7):
  dt-bindings: soundwire: qcom: add Qualcomm Soundwire v2.0.0
  dt-bindings: soundwire: qcom: add 16-bit sample interval
  soundwire: qcom: allow 16-bit sample interval for ports
  soundwire: qcom: use consistently 'ctrl' as state variable name
  soundwire: qcom: prepare for handling different register layouts
  soundwire: qcom: add support for v2.0.0 controller
  soundwire: qcom: use tabs for indentation in defines

 .../bindings/soundwire/qcom,soundwire.yaml    |  39 +-
 drivers/soundwire/qcom.c                      | 387 ++++++++++++------
 2 files changed, 287 insertions(+), 139 deletions(-)

-- 
2.34.1

[PATCH v3 1/7] dt-bindings: soundwire: qcom: add Qualcomm Soundwire v2.0.0

[Krzysztof Kozlowski]

Add compatible for Qualcomm Soundwire v2.0.0 controller, which comes
with several differences against v1.7.0 in register layout and more
ports (thus increase maxItems of each port-related property to 16).

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Add tags.

Changes since v1:
1. Increase maxItems to 16 for port-related properties.
---
 .../bindings/soundwire/qcom,soundwire.yaml    | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index e4dba825ab11..98c7fc7e1189 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -21,6 +21,7 @@ properties:
       - qcom,soundwire-v1.5.1
       - qcom,soundwire-v1.6.0
       - qcom,soundwire-v1.7.0
+      - qcom,soundwire-v2.0.0
 
   reg:
     maxItems: 1
@@ -80,7 +81,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-sinterval-low:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -91,7 +92,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-offset1:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -102,7 +103,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-offset2:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -113,7 +114,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-lane-control:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -124,7 +125,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
 
   qcom,ports-block-pack-mode:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -137,7 +138,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -154,7 +155,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -171,7 +172,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
@@ -187,7 +188,7 @@ properties:
       or applicable for the respective data port.
       More info in MIPI Alliance SoundWire 1.0 Specifications.
     minItems: 3
-    maxItems: 8
+    maxItems: 16
     items:
       oneOf:
         - minimum: 0
-- 
2.34.1

[PATCH v3 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

[Krzysztof Kozlowski]

The port sample interval was always 16-bit, split into low and high
bytes.  This split was unnecessary, although harmless for older devices
because all of them used only lower byte (so values < 0xff).  With
support for Soundwire controller on Qualcomm SM8550 and its devices,
both bytes will be used, thus add a new 'qcom,ports-sinterval' property
to allow 16-bit sample intervals.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Use uint16 for qcom,ports-sinterval.
   DTS will be fixed in separate patchset.
2. Add tags.
---
 .../bindings/soundwire/qcom,soundwire.yaml    | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index 98c7fc7e1189..fb44b89a754e 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -86,7 +86,7 @@ properties:
   qcom,ports-sinterval-low:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
-      Sample interval low of each data port.
+      Sample interval (only lowest byte) of each data port.
       Out ports followed by In ports. Used for Sample Interval calculation.
       Value of 0xff indicates that this option is not implemented
       or applicable for the respective data port.
@@ -94,6 +94,17 @@ properties:
     minItems: 3
     maxItems: 16
 
+  qcom,ports-sinterval:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description:
+      Sample interval of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xffff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
   qcom,ports-offset1:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
@@ -220,10 +231,15 @@ required:
   - '#size-cells'
   - qcom,dout-ports
   - qcom,din-ports
-  - qcom,ports-sinterval-low
   - qcom,ports-offset1
   - qcom,ports-offset2
 
+oneOf:
+  - required:
+      - qcom,ports-sinterval-low
+  - required:
+      - qcom,ports-sinterval
+
 additionalProperties: false
 
 examples:
-- 
2.34.1

Re: [PATCH v3 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

[Srinivas Kandagatla]

On 18/04/2023 10:54, Krzysztof Kozlowski wrote:
> The port sample interval was always 16-bit, split into low and high
> bytes.  This split was unnecessary, although harmless for older devices
> because all of them used only lower byte (so values < 0xff).  With
> support for Soundwire controller on Qualcomm SM8550 and its devices,
> both bytes will be used, thus add a new 'qcom,ports-sinterval' property
> to allow 16-bit sample intervals.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

--srini
> 
> Changes since v2:
> 1. Use uint16 for qcom,ports-sinterval.
>     DTS will be fixed in separate patchset.
> 2. Add tags.
> ---
>   .../bindings/soundwire/qcom,soundwire.yaml    | 20 +++++++++++++++++--
>   1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> index 98c7fc7e1189..fb44b89a754e 100644
> --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> @@ -86,7 +86,7 @@ properties:
>     qcom,ports-sinterval-low:
>       $ref: /schemas/types.yaml#/definitions/uint8-array
>       description:
> -      Sample interval low of each data port.
> +      Sample interval (only lowest byte) of each data port.
>         Out ports followed by In ports. Used for Sample Interval calculation.
>         Value of 0xff indicates that this option is not implemented
>         or applicable for the respective data port.
> @@ -94,6 +94,17 @@ properties:
>       minItems: 3
>       maxItems: 16
>   
> +  qcom,ports-sinterval:
> +    $ref: /schemas/types.yaml#/definitions/uint16-array
> +    description:
> +      Sample interval of each data port.
> +      Out ports followed by In ports. Used for Sample Interval calculation.
> +      Value of 0xffff indicates that this option is not implemented
> +      or applicable for the respective data port.
> +      More info in MIPI Alliance SoundWire 1.0 Specifications.
> +    minItems: 3
> +    maxItems: 16
> +
>     qcom,ports-offset1:
>       $ref: /schemas/types.yaml#/definitions/uint8-array
>       description:
> @@ -220,10 +231,15 @@ required:
>     - '#size-cells'
>     - qcom,dout-ports
>     - qcom,din-ports
> -  - qcom,ports-sinterval-low
>     - qcom,ports-offset1
>     - qcom,ports-offset2
>   
> +oneOf:
> +  - required:
> +      - qcom,ports-sinterval-low
> +  - required:
> +      - qcom,ports-sinterval
> +
>   additionalProperties: false
>   
>   examples:

[PATCH v3 3/7] soundwire: qcom: allow 16-bit sample interval for ports

[Krzysztof Kozlowski]

The port sample interval was always 16-bit, split into low and high
bytes.  This split was unnecessary, although harmless for older devices
because all of them used only lower byte (so values < 0xff).  With
support for Soundwire controller on Qualcomm SM8550 and its devices,
both bytes will be used, thus add a new 'qcom,ports-sinterval' property
to allow 16-bit sample intervals.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Use uint16 for qcom,ports-sinterval.
2. Add tags.

Changes since v1:
1. Drop unneeded semicolon.
---
 drivers/soundwire/qcom.c | 32 +++++++++++++++++++++++++-------
 1 file changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index c296e0bf897b..d051dc408532 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -95,6 +95,7 @@
 #define SWRM_DP_BLOCK_CTRL2_BANK(n, m)	(0x1130 + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DP_PORT_HCTRL_BANK(n, m)	(0x1134 + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DP_BLOCK_CTRL3_BANK(n, m)	(0x1138 + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DP_SAMPLECTRL2_BANK(n, m)	(0x113C + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DIN_DPn_PCM_PORT_CTRL(n)	(0x1054 + 0x100 * (n - 1))
 #define SWR_MSTR_MAX_REG_ADDR		(0x1740)
 
@@ -131,7 +132,7 @@ enum {
 };
 
 struct qcom_swrm_port_config {
-	u8 si;
+	u16 si;
 	u8 off1;
 	u8 off2;
 	u8 bp_mode;
@@ -806,12 +807,20 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
 
 	value = pcfg->off1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT;
 	value |= pcfg->off2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT;
-	value |= pcfg->si;
+	value |= pcfg->si & 0xff;
 
 	ret = ctrl->reg_write(ctrl, reg, value);
 	if (ret)
 		goto err;
 
+	if (pcfg->si > 0xff) {
+		value = (pcfg->si >> 8) & 0xff;
+		reg = SWRM_DP_SAMPLECTRL2_BANK(params->port_num, bank);
+		ret = ctrl->reg_write(ctrl, reg, value);
+		if (ret)
+			goto err;
+	}
+
 	if (pcfg->lane_control != SWR_INVALID_PARAM) {
 		reg = SWRM_DP_PORT_CTRL_2_BANK(params->port_num, bank);
 		value = pcfg->lane_control;
@@ -1185,7 +1194,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 	struct device_node *np = ctrl->dev->of_node;
 	u8 off1[QCOM_SDW_MAX_PORTS];
 	u8 off2[QCOM_SDW_MAX_PORTS];
-	u8 si[QCOM_SDW_MAX_PORTS];
+	u16 si[QCOM_SDW_MAX_PORTS];
 	u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, };
 	u8 hstart[QCOM_SDW_MAX_PORTS];
 	u8 hstop[QCOM_SDW_MAX_PORTS];
@@ -1193,6 +1202,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 	u8 blk_group_count[QCOM_SDW_MAX_PORTS];
 	u8 lane_control[QCOM_SDW_MAX_PORTS];
 	int i, ret, nports, val;
+	bool si_16 = false;
 
 	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
 
@@ -1236,9 +1246,14 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 		return ret;
 
 	ret = of_property_read_u8_array(np, "qcom,ports-sinterval-low",
-					si, nports);
-	if (ret)
-		return ret;
+					(u8 *)si, nports);
+	if (ret) {
+		ret = of_property_read_u16_array(np, "qcom,ports-sinterval",
+						 si, nports);
+		if (ret)
+			return ret;
+		si_16 = true;
+	}
 
 	ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode",
 					bp_mode, nports);
@@ -1266,7 +1281,10 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 
 	for (i = 0; i < nports; i++) {
 		/* Valid port number range is from 1-14 */
-		ctrl->pconfig[i + 1].si = si[i];
+		if (si_16)
+			ctrl->pconfig[i + 1].si = si[i];
+		else
+			ctrl->pconfig[i + 1].si = ((u8 *)si)[i];
 		ctrl->pconfig[i + 1].off1 = off1[i];
 		ctrl->pconfig[i + 1].off2 = off2[i];
 		ctrl->pconfig[i + 1].bp_mode = bp_mode[i];
-- 
2.34.1

Re: [PATCH v3 3/7] soundwire: qcom: allow 16-bit sample interval for ports

[Srinivas Kandagatla]

On 18/04/2023 10:54, Krzysztof Kozlowski wrote:
> The port sample interval was always 16-bit, split into low and high
> bytes.  This split was unnecessary, although harmless for older devices
> because all of them used only lower byte (so values < 0xff).  With
> support for Soundwire controller on Qualcomm SM8550 and its devices,
> both bytes will be used, thus add a new 'qcom,ports-sinterval' property
> to allow 16-bit sample intervals.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
LGTM,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

--srini
> Changes since v2:
> 1. Use uint16 for qcom,ports-sinterval.
> 2. Add tags.
> 
> Changes since v1:
> 1. Drop unneeded semicolon.
> ---
>   drivers/soundwire/qcom.c | 32 +++++++++++++++++++++++++-------
>   1 file changed, 25 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index c296e0bf897b..d051dc408532 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -95,6 +95,7 @@
>   #define SWRM_DP_BLOCK_CTRL2_BANK(n, m)	(0x1130 + 0x100 * (n - 1) + 0x40 * m)
>   #define SWRM_DP_PORT_HCTRL_BANK(n, m)	(0x1134 + 0x100 * (n - 1) + 0x40 * m)
>   #define SWRM_DP_BLOCK_CTRL3_BANK(n, m)	(0x1138 + 0x100 * (n - 1) + 0x40 * m)
> +#define SWRM_DP_SAMPLECTRL2_BANK(n, m)	(0x113C + 0x100 * (n - 1) + 0x40 * m)
>   #define SWRM_DIN_DPn_PCM_PORT_CTRL(n)	(0x1054 + 0x100 * (n - 1))
>   #define SWR_MSTR_MAX_REG_ADDR		(0x1740)
>   
> @@ -131,7 +132,7 @@ enum {
>   };
>   
>   struct qcom_swrm_port_config {
> -	u8 si;
> +	u16 si;
>   	u8 off1;
>   	u8 off2;
>   	u8 bp_mode;
> @@ -806,12 +807,20 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
>   
>   	value = pcfg->off1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT;
>   	value |= pcfg->off2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT;
> -	value |= pcfg->si;
> +	value |= pcfg->si & 0xff;
>   
>   	ret = ctrl->reg_write(ctrl, reg, value);
>   	if (ret)
>   		goto err;
>   
> +	if (pcfg->si > 0xff) {
> +		value = (pcfg->si >> 8) & 0xff;
> +		reg = SWRM_DP_SAMPLECTRL2_BANK(params->port_num, bank);
> +		ret = ctrl->reg_write(ctrl, reg, value);
> +		if (ret)
> +			goto err;
> +	}
> +
>   	if (pcfg->lane_control != SWR_INVALID_PARAM) {
>   		reg = SWRM_DP_PORT_CTRL_2_BANK(params->port_num, bank);
>   		value = pcfg->lane_control;
> @@ -1185,7 +1194,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
>   	struct device_node *np = ctrl->dev->of_node;
>   	u8 off1[QCOM_SDW_MAX_PORTS];
>   	u8 off2[QCOM_SDW_MAX_PORTS];
> -	u8 si[QCOM_SDW_MAX_PORTS];
> +	u16 si[QCOM_SDW_MAX_PORTS];
>   	u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, };
>   	u8 hstart[QCOM_SDW_MAX_PORTS];
>   	u8 hstop[QCOM_SDW_MAX_PORTS];
> @@ -1193,6 +1202,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
>   	u8 blk_group_count[QCOM_SDW_MAX_PORTS];
>   	u8 lane_control[QCOM_SDW_MAX_PORTS];
>   	int i, ret, nports, val;
> +	bool si_16 = false;
>   
>   	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
>   
> @@ -1236,9 +1246,14 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
>   		return ret;
>   
>   	ret = of_property_read_u8_array(np, "qcom,ports-sinterval-low",
> -					si, nports);
> -	if (ret)
> -		return ret;
> +					(u8 *)si, nports);
> +	if (ret) {
> +		ret = of_property_read_u16_array(np, "qcom,ports-sinterval",
> +						 si, nports);
> +		if (ret)
> +			return ret;
> +		si_16 = true;
> +	}
>   
>   	ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode",
>   					bp_mode, nports);
> @@ -1266,7 +1281,10 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
>   
>   	for (i = 0; i < nports; i++) {
>   		/* Valid port number range is from 1-14 */
> -		ctrl->pconfig[i + 1].si = si[i];
> +		if (si_16)
> +			ctrl->pconfig[i + 1].si = si[i];
> +		else
> +			ctrl->pconfig[i + 1].si = ((u8 *)si)[i];
>   		ctrl->pconfig[i + 1].off1 = off1[i];
>   		ctrl->pconfig[i + 1].off2 = off2[i];
>   		ctrl->pconfig[i + 1].bp_mode = bp_mode[i];

[PATCH v3 4/7] soundwire: qcom: use consistently 'ctrl' as state variable name

[Krzysztof Kozlowski]

The pointer to 'struct qcom_swrm_ctrl' was called sometimes 'swrm' and
sometimes 'ctrl' variable.  Choose one - 'ctrl' - so the code will be
consistent and easier to read.

No functional change.

Reviewed-by: Srinivas Kandagagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Add tags.
---
 drivers/soundwire/qcom.c | 168 +++++++++++++++++++--------------------
 1 file changed, 84 insertions(+), 84 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index d051dc408532..dad12e9f5478 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -279,14 +279,14 @@ static u32 swrm_get_packed_reg_val(u8 *cmd_id, u8 cmd_data,
 	return val;
 }
 
-static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *swrm)
+static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *ctrl)
 {
 	u32 fifo_outstanding_data, value;
 	int fifo_retry_count = SWR_OVERFLOW_RETRY_COUNT;
 
 	do {
 		/* Check for fifo underflow during read */
-		swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value);
+		ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
 		fifo_outstanding_data = FIELD_GET(SWRM_RD_CMD_FIFO_CNT_MASK, value);
 
 		/* Check if read data is available in read fifo */
@@ -297,39 +297,39 @@ static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *swrm)
 	} while (fifo_retry_count--);
 
 	if (fifo_outstanding_data == 0) {
-		dev_err_ratelimited(swrm->dev, "%s err read underflow\n", __func__);
+		dev_err_ratelimited(ctrl->dev, "%s err read underflow\n", __func__);
 		return -EIO;
 	}
 
 	return 0;
 }
 
-static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *swrm)
+static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *ctrl)
 {
 	u32 fifo_outstanding_cmds, value;
 	int fifo_retry_count = SWR_OVERFLOW_RETRY_COUNT;
 
 	do {
 		/* Check for fifo overflow during write */
-		swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value);
+		ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
 		fifo_outstanding_cmds = FIELD_GET(SWRM_WR_CMD_FIFO_CNT_MASK, value);
 
 		/* Check for space in write fifo before writing */
-		if (fifo_outstanding_cmds < swrm->wr_fifo_depth)
+		if (fifo_outstanding_cmds < ctrl->wr_fifo_depth)
 			return 0;
 
 		usleep_range(500, 510);
 	} while (fifo_retry_count--);
 
-	if (fifo_outstanding_cmds == swrm->wr_fifo_depth) {
-		dev_err_ratelimited(swrm->dev, "%s err write overflow\n", __func__);
+	if (fifo_outstanding_cmds == ctrl->wr_fifo_depth) {
+		dev_err_ratelimited(ctrl->dev, "%s err write overflow\n", __func__);
 		return -EIO;
 	}
 
 	return 0;
 }
 
-static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,
+static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data,
 				     u8 dev_addr, u16 reg_addr)
 {
 
@@ -342,20 +342,20 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,
 		val = swrm_get_packed_reg_val(&cmd_id, cmd_data,
 					      dev_addr, reg_addr);
 	} else {
-		val = swrm_get_packed_reg_val(&swrm->wcmd_id, cmd_data,
+		val = swrm_get_packed_reg_val(&ctrl->wcmd_id, cmd_data,
 					      dev_addr, reg_addr);
 	}
 
-	if (swrm_wait_for_wr_fifo_avail(swrm))
+	if (swrm_wait_for_wr_fifo_avail(ctrl))
 		return SDW_CMD_FAIL_OTHER;
 
 	if (cmd_id == SWR_BROADCAST_CMD_ID)
-		reinit_completion(&swrm->broadcast);
+		reinit_completion(&ctrl->broadcast);
 
 	/* Its assumed that write is okay as we do not get any status back */
-	swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val);
+	ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val);
 
-	if (swrm->version <= SWRM_VERSION_1_3_0)
+	if (ctrl->version <= SWRM_VERSION_1_3_0)
 		usleep_range(150, 155);
 
 	if (cmd_id == SWR_BROADCAST_CMD_ID) {
@@ -363,7 +363,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,
 		 * sleep for 10ms for MSM soundwire variant to allow broadcast
 		 * command to complete.
 		 */
-		ret = wait_for_completion_timeout(&swrm->broadcast,
+		ret = wait_for_completion_timeout(&ctrl->broadcast,
 						  msecs_to_jiffies(TIMEOUT_MS));
 		if (!ret)
 			ret = SDW_CMD_IGNORED;
@@ -376,41 +376,41 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,
 	return ret;
 }
 
-static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm,
+static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl,
 				     u8 dev_addr, u16 reg_addr,
 				     u32 len, u8 *rval)
 {
 	u32 cmd_data, cmd_id, val, retry_attempt = 0;
 
-	val = swrm_get_packed_reg_val(&swrm->rcmd_id, len, dev_addr, reg_addr);
+	val = swrm_get_packed_reg_val(&ctrl->rcmd_id, len, dev_addr, reg_addr);
 
 	/*
 	 * Check for outstanding cmd wrt. write fifo depth to avoid
 	 * overflow as read will also increase write fifo cnt.
 	 */
-	swrm_wait_for_wr_fifo_avail(swrm);
+	swrm_wait_for_wr_fifo_avail(ctrl);
 
 	/* wait for FIFO RD to complete to avoid overflow */
 	usleep_range(100, 105);
-	swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val);
+	ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val);
 	/* wait for FIFO RD CMD complete to avoid overflow */
 	usleep_range(250, 255);
 
-	if (swrm_wait_for_rd_fifo_avail(swrm))
+	if (swrm_wait_for_rd_fifo_avail(ctrl))
 		return SDW_CMD_FAIL_OTHER;
 
 	do {
-		swrm->reg_read(swrm, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data);
+		ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data);
 		rval[0] = cmd_data & 0xFF;
 		cmd_id = FIELD_GET(SWRM_RD_FIFO_CMD_ID_MASK, cmd_data);
 
-		if (cmd_id != swrm->rcmd_id) {
+		if (cmd_id != ctrl->rcmd_id) {
 			if (retry_attempt < (MAX_FIFO_RD_RETRY - 1)) {
 				/* wait 500 us before retry on fifo read failure */
 				usleep_range(500, 505);
-				swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD,
+				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD,
 						SWRM_CMD_FIFO_FLUSH);
-				swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val);
+				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val);
 			}
 			retry_attempt++;
 		} else {
@@ -419,9 +419,9 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm,
 
 	} while (retry_attempt < MAX_FIFO_RD_RETRY);
 
-	dev_err(swrm->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\
+	dev_err(ctrl->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\
 		dev_num: 0x%x, cmd_data: 0x%x\n",
-		reg_addr, swrm->rcmd_id, dev_addr, cmd_data);
+		reg_addr, ctrl->rcmd_id, dev_addr, cmd_data);
 
 	return SDW_CMD_IGNORED;
 }
@@ -533,39 +533,39 @@ static int qcom_swrm_enumerate(struct sdw_bus *bus)
 
 static irqreturn_t qcom_swrm_wake_irq_handler(int irq, void *dev_id)
 {
-	struct qcom_swrm_ctrl *swrm = dev_id;
+	struct qcom_swrm_ctrl *ctrl = dev_id;
 	int ret;
 
-	ret = pm_runtime_resume_and_get(swrm->dev);
+	ret = pm_runtime_resume_and_get(ctrl->dev);
 	if (ret < 0 && ret != -EACCES) {
-		dev_err_ratelimited(swrm->dev,
+		dev_err_ratelimited(ctrl->dev,
 				    "pm_runtime_resume_and_get failed in %s, ret %d\n",
 				    __func__, ret);
 		return ret;
 	}
 
-	if (swrm->wake_irq > 0) {
-		if (!irqd_irq_disabled(irq_get_irq_data(swrm->wake_irq)))
-			disable_irq_nosync(swrm->wake_irq);
+	if (ctrl->wake_irq > 0) {
+		if (!irqd_irq_disabled(irq_get_irq_data(ctrl->wake_irq)))
+			disable_irq_nosync(ctrl->wake_irq);
 	}
 
-	pm_runtime_mark_last_busy(swrm->dev);
-	pm_runtime_put_autosuspend(swrm->dev);
+	pm_runtime_mark_last_busy(ctrl->dev);
+	pm_runtime_put_autosuspend(ctrl->dev);
 
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 {
-	struct qcom_swrm_ctrl *swrm = dev_id;
+	struct qcom_swrm_ctrl *ctrl = dev_id;
 	u32 value, intr_sts, intr_sts_masked, slave_status;
 	u32 i;
 	int devnum;
 	int ret = IRQ_HANDLED;
-	clk_prepare_enable(swrm->hclk);
+	clk_prepare_enable(ctrl->hclk);
 
-	swrm->reg_read(swrm, SWRM_INTERRUPT_STATUS, &intr_sts);
-	intr_sts_masked = intr_sts & swrm->intr_mask;
+	ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts);
+	intr_sts_masked = intr_sts & ctrl->intr_mask;
 
 	do {
 		for (i = 0; i < SWRM_INTERRUPT_MAX; i++) {
@@ -575,80 +575,80 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 
 			switch (value) {
 			case SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ:
-				devnum = qcom_swrm_get_alert_slave_dev_num(swrm);
+				devnum = qcom_swrm_get_alert_slave_dev_num(ctrl);
 				if (devnum < 0) {
-					dev_err_ratelimited(swrm->dev,
+					dev_err_ratelimited(ctrl->dev,
 					    "no slave alert found.spurious interrupt\n");
 				} else {
-					sdw_handle_slave_status(&swrm->bus, swrm->status);
+					sdw_handle_slave_status(&ctrl->bus, ctrl->status);
 				}
 
 				break;
 			case SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED:
 			case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS:
-				dev_dbg_ratelimited(swrm->dev, "SWR new slave attached\n");
-				swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status);
-				if (swrm->slave_status == slave_status) {
-					dev_dbg(swrm->dev, "Slave status not changed %x\n",
+				dev_dbg_ratelimited(ctrl->dev, "SWR new slave attached\n");
+				ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &slave_status);
+				if (ctrl->slave_status == slave_status) {
+					dev_dbg(ctrl->dev, "Slave status not changed %x\n",
 						slave_status);
 				} else {
-					qcom_swrm_get_device_status(swrm);
-					qcom_swrm_enumerate(&swrm->bus);
-					sdw_handle_slave_status(&swrm->bus, swrm->status);
+					qcom_swrm_get_device_status(ctrl);
+					qcom_swrm_enumerate(&ctrl->bus);
+					sdw_handle_slave_status(&ctrl->bus, ctrl->status);
 				}
 				break;
 			case SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET:
-				dev_err_ratelimited(swrm->dev,
+				dev_err_ratelimited(ctrl->dev,
 						"%s: SWR bus clsh detected\n",
 						__func__);
-				swrm->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-				swrm->reg_write(swrm, SWRM_INTERRUPT_CPU_EN, swrm->intr_mask);
+				ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
+				ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
 				break;
 			case SWRM_INTERRUPT_STATUS_RD_FIFO_OVERFLOW:
-				swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value);
-				dev_err_ratelimited(swrm->dev,
+				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR read FIFO overflow fifo status 0x%x\n",
 					__func__, value);
 				break;
 			case SWRM_INTERRUPT_STATUS_RD_FIFO_UNDERFLOW:
-				swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value);
-				dev_err_ratelimited(swrm->dev,
+				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR read FIFO underflow fifo status 0x%x\n",
 					__func__, value);
 				break;
 			case SWRM_INTERRUPT_STATUS_WR_CMD_FIFO_OVERFLOW:
-				swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value);
-				dev_err(swrm->dev,
+				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				dev_err(ctrl->dev,
 					"%s: SWR write FIFO overflow fifo status %x\n",
 					__func__, value);
-				swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, 0x1);
+				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1);
 				break;
 			case SWRM_INTERRUPT_STATUS_CMD_ERROR:
-				swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value);
-				dev_err_ratelimited(swrm->dev,
+				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR CMD error, fifo status 0x%x, flushing fifo\n",
 					__func__, value);
-				swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, 0x1);
+				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1);
 				break;
 			case SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION:
-				dev_err_ratelimited(swrm->dev,
+				dev_err_ratelimited(ctrl->dev,
 						"%s: SWR Port collision detected\n",
 						__func__);
-				swrm->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION;
-				swrm->reg_write(swrm,
-					SWRM_INTERRUPT_CPU_EN, swrm->intr_mask);
+				ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION;
+				ctrl->reg_write(ctrl,
+					SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
 				break;
 			case SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH:
-				dev_err_ratelimited(swrm->dev,
+				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR read enable valid mismatch\n",
 					__func__);
-				swrm->intr_mask &=
+				ctrl->intr_mask &=
 					~SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH;
-				swrm->reg_write(swrm,
-					SWRM_INTERRUPT_CPU_EN, swrm->intr_mask);
+				ctrl->reg_write(ctrl,
+					SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
 				break;
 			case SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED:
-				complete(&swrm->broadcast);
+				complete(&ctrl->broadcast);
 				break;
 			case SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2:
 				break;
@@ -657,19 +657,19 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 			case SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP:
 				break;
 			default:
-				dev_err_ratelimited(swrm->dev,
+				dev_err_ratelimited(ctrl->dev,
 						"%s: SWR unknown interrupt value: %d\n",
 						__func__, value);
 				ret = IRQ_NONE;
 				break;
 			}
 		}
-		swrm->reg_write(swrm, SWRM_INTERRUPT_CLEAR, intr_sts);
-		swrm->reg_read(swrm, SWRM_INTERRUPT_STATUS, &intr_sts);
-		intr_sts_masked = intr_sts & swrm->intr_mask;
+		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, intr_sts);
+		ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts);
+		intr_sts_masked = intr_sts & ctrl->intr_mask;
 	} while (intr_sts_masked);
 
-	clk_disable_unprepare(swrm->hclk);
+	clk_disable_unprepare(ctrl->hclk);
 	return ret;
 }
 
@@ -1301,23 +1301,23 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 #ifdef CONFIG_DEBUG_FS
 static int swrm_reg_show(struct seq_file *s_file, void *data)
 {
-	struct qcom_swrm_ctrl *swrm = s_file->private;
+	struct qcom_swrm_ctrl *ctrl = s_file->private;
 	int reg, reg_val, ret;
 
-	ret = pm_runtime_resume_and_get(swrm->dev);
+	ret = pm_runtime_resume_and_get(ctrl->dev);
 	if (ret < 0 && ret != -EACCES) {
-		dev_err_ratelimited(swrm->dev,
+		dev_err_ratelimited(ctrl->dev,
 				    "pm_runtime_resume_and_get failed in %s, ret %d\n",
 				    __func__, ret);
 		return ret;
 	}
 
 	for (reg = 0; reg <= SWR_MSTR_MAX_REG_ADDR; reg += 4) {
-		swrm->reg_read(swrm, reg, &reg_val);
+		ctrl->reg_read(ctrl, reg, &reg_val);
 		seq_printf(s_file, "0x%.3x: 0x%.2x\n", reg, reg_val);
 	}
-	pm_runtime_mark_last_busy(swrm->dev);
-	pm_runtime_put_autosuspend(swrm->dev);
+	pm_runtime_mark_last_busy(ctrl->dev);
+	pm_runtime_put_autosuspend(ctrl->dev);
 
 
 	return 0;
@@ -1498,13 +1498,13 @@ static int qcom_swrm_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *swrm)
+static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *ctrl)
 {
 	int retry = SWRM_LINK_STATUS_RETRY_CNT;
 	int comp_sts;
 
 	do {
-		swrm->reg_read(swrm, SWRM_COMP_STATUS, &comp_sts);
+		ctrl->reg_read(ctrl, SWRM_COMP_STATUS, &comp_sts);
 
 		if (comp_sts & SWRM_FRM_GEN_ENABLED)
 			return true;
@@ -1512,7 +1512,7 @@ static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *swrm)
 		usleep_range(500, 510);
 	} while (retry--);
 
-	dev_err(swrm->dev, "%s: link status not %s\n", __func__,
+	dev_err(ctrl->dev, "%s: link status not %s\n", __func__,
 		comp_sts & SWRM_FRM_GEN_ENABLED ? "connected" : "disconnected");
 
 	return false;
-- 
2.34.1

[PATCH v3 5/7] soundwire: qcom: prepare for handling different register layouts

[Krzysztof Kozlowski]

Currently the driver supports Qualcomm Soundwire controller versions
from v1.3 till v1.7 which mostly have same register layout.  With
coming Qualcomm Soundwire v2.0, several registers were moved and
changed, thus a different register layout will have to be supported.

Prepare for this by:
1. Renaming few register defines to indicate v1.3 (earliest supported)
   version,
2. Add a simple table for mapping register to its offset,
3. Change the code to use the mapping table.

Since only few registers differ, this solution seems easier then
switching to regmap fields.

Reviewed-by: Srinivas Kandagagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Add tags.

Changes since v1:
1. Fix lang typo in subject.
---
 drivers/soundwire/qcom.c | 130 +++++++++++++++++++++++++++++----------
 1 file changed, 97 insertions(+), 33 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index dad12e9f5478..eac566f168da 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -41,7 +41,7 @@
 #define SWRM_COMP_PARAMS_DOUT_PORTS_MASK			GENMASK(4, 0)
 #define SWRM_COMP_PARAMS_DIN_PORTS_MASK				GENMASK(9, 5)
 #define SWRM_COMP_MASTER_ID					0x104
-#define SWRM_INTERRUPT_STATUS					0x200
+#define SWRM_V1_3_INTERRUPT_STATUS				0x200
 #define SWRM_INTERRUPT_STATUS_RMSK				GENMASK(16, 0)
 #define SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ			BIT(0)
 #define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED		BIT(1)
@@ -58,20 +58,20 @@
 #define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2              BIT(14)
 #define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP               BIT(16)
 #define SWRM_INTERRUPT_MAX					17
-#define SWRM_INTERRUPT_MASK_ADDR				0x204
-#define SWRM_INTERRUPT_CLEAR					0x208
-#define SWRM_INTERRUPT_CPU_EN					0x210
-#define SWRM_CMD_FIFO_WR_CMD					0x300
-#define SWRM_CMD_FIFO_RD_CMD					0x304
+#define SWRM_V1_3_INTERRUPT_MASK_ADDR				0x204
+#define SWRM_V1_3_INTERRUPT_CLEAR				0x208
+#define SWRM_V1_3_INTERRUPT_CPU_EN				0x210
+#define SWRM_V1_3_CMD_FIFO_WR_CMD				0x300
+#define SWRM_V1_3_CMD_FIFO_RD_CMD				0x304
 #define SWRM_CMD_FIFO_CMD					0x308
 #define SWRM_CMD_FIFO_FLUSH					0x1
-#define SWRM_CMD_FIFO_STATUS					0x30C
+#define SWRM_V1_3_CMD_FIFO_STATUS				0x30C
 #define SWRM_RD_CMD_FIFO_CNT_MASK				GENMASK(20, 16)
 #define SWRM_WR_CMD_FIFO_CNT_MASK				GENMASK(12, 8)
 #define SWRM_CMD_FIFO_CFG_ADDR					0x314
 #define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE			BIT(31)
 #define SWRM_RD_WR_CMD_RETRIES					0x7
-#define SWRM_CMD_FIFO_RD_FIFO_ADDR				0x318
+#define SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR				0x318
 #define SWRM_RD_FIFO_CMD_ID_MASK				GENMASK(11, 8)
 #define SWRM_ENUMERATOR_CFG_ADDR				0x500
 #define SWRM_ENUMERATOR_SLAVE_DEV_ID_1(m)		(0x530 + 0x8 * (m))
@@ -97,7 +97,7 @@
 #define SWRM_DP_BLOCK_CTRL3_BANK(n, m)	(0x1138 + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DP_SAMPLECTRL2_BANK(n, m)	(0x113C + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DIN_DPn_PCM_PORT_CTRL(n)	(0x1054 + 0x100 * (n - 1))
-#define SWR_MSTR_MAX_REG_ADDR		(0x1740)
+#define SWR_V1_3_MSTR_MAX_REG_ADDR				0x1740
 
 #define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT				0x18
 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT				0x10
@@ -143,10 +143,28 @@ struct qcom_swrm_port_config {
 	u8 lane_control;
 };
 
+/*
+ * Internal IDs for different register layouts.  Only few registers differ per
+ * each variant, so the list of IDs below does not include all of registers.
+ */
+enum {
+	SWRM_REG_FRAME_GEN_ENABLED,
+	SWRM_REG_INTERRUPT_STATUS,
+	SWRM_REG_INTERRUPT_MASK_ADDR,
+	SWRM_REG_INTERRUPT_CLEAR,
+	SWRM_REG_INTERRUPT_CPU_EN,
+	SWRM_REG_CMD_FIFO_WR_CMD,
+	SWRM_REG_CMD_FIFO_RD_CMD,
+	SWRM_REG_CMD_FIFO_STATUS,
+	SWRM_REG_CMD_FIFO_RD_FIFO_ADDR,
+};
+
 struct qcom_swrm_ctrl {
 	struct sdw_bus bus;
 	struct device *dev;
 	struct regmap *regmap;
+	u32 max_reg;
+	const unsigned int *reg_layout;
 	void __iomem *mmio;
 	struct reset_control *audio_cgcr;
 #ifdef CONFIG_DEBUG_FS
@@ -187,22 +205,42 @@ struct qcom_swrm_data {
 	u32 default_cols;
 	u32 default_rows;
 	bool sw_clk_gate_required;
+	u32 max_reg;
+	const unsigned int *reg_layout;
+};
+
+static const unsigned int swrm_v1_3_reg_layout[] = {
+	[SWRM_REG_FRAME_GEN_ENABLED] = SWRM_COMP_STATUS,
+	[SWRM_REG_INTERRUPT_STATUS] = SWRM_V1_3_INTERRUPT_STATUS,
+	[SWRM_REG_INTERRUPT_MASK_ADDR] = SWRM_V1_3_INTERRUPT_MASK_ADDR,
+	[SWRM_REG_INTERRUPT_CLEAR] = SWRM_V1_3_INTERRUPT_CLEAR,
+	[SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V1_3_INTERRUPT_CPU_EN,
+	[SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V1_3_CMD_FIFO_WR_CMD,
+	[SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V1_3_CMD_FIFO_RD_CMD,
+	[SWRM_REG_CMD_FIFO_STATUS] = SWRM_V1_3_CMD_FIFO_STATUS,
+	[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR,
 };
 
 static const struct qcom_swrm_data swrm_v1_3_data = {
 	.default_rows = 48,
 	.default_cols = 16,
+	.max_reg = SWR_V1_3_MSTR_MAX_REG_ADDR,
+	.reg_layout = swrm_v1_3_reg_layout,
 };
 
 static const struct qcom_swrm_data swrm_v1_5_data = {
 	.default_rows = 50,
 	.default_cols = 16,
+	.max_reg = SWR_V1_3_MSTR_MAX_REG_ADDR,
+	.reg_layout = swrm_v1_3_reg_layout,
 };
 
 static const struct qcom_swrm_data swrm_v1_6_data = {
 	.default_rows = 50,
 	.default_cols = 16,
 	.sw_clk_gate_required = true,
+	.max_reg = SWR_V1_3_MSTR_MAX_REG_ADDR,
+	.reg_layout = swrm_v1_3_reg_layout,
 };
 
 #define to_qcom_sdw(b)	container_of(b, struct qcom_swrm_ctrl, bus)
@@ -286,7 +324,8 @@ static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *ctrl)
 
 	do {
 		/* Check for fifo underflow during read */
-		ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+		ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS],
+			       &value);
 		fifo_outstanding_data = FIELD_GET(SWRM_RD_CMD_FIFO_CNT_MASK, value);
 
 		/* Check if read data is available in read fifo */
@@ -311,7 +350,8 @@ static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *ctrl)
 
 	do {
 		/* Check for fifo overflow during write */
-		ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+		ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS],
+			       &value);
 		fifo_outstanding_cmds = FIELD_GET(SWRM_WR_CMD_FIFO_CNT_MASK, value);
 
 		/* Check for space in write fifo before writing */
@@ -353,7 +393,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data,
 		reinit_completion(&ctrl->broadcast);
 
 	/* Its assumed that write is okay as we do not get any status back */
-	ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val);
+	ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_WR_CMD], val);
 
 	if (ctrl->version <= SWRM_VERSION_1_3_0)
 		usleep_range(150, 155);
@@ -392,7 +432,7 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl,
 
 	/* wait for FIFO RD to complete to avoid overflow */
 	usleep_range(100, 105);
-	ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val);
+	ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_RD_CMD], val);
 	/* wait for FIFO RD CMD complete to avoid overflow */
 	usleep_range(250, 255);
 
@@ -400,7 +440,8 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl,
 		return SDW_CMD_FAIL_OTHER;
 
 	do {
-		ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data);
+		ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR],
+			       &cmd_data);
 		rval[0] = cmd_data & 0xFF;
 		cmd_id = FIELD_GET(SWRM_RD_FIFO_CMD_ID_MASK, cmd_data);
 
@@ -410,7 +451,9 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl,
 				usleep_range(500, 505);
 				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD,
 						SWRM_CMD_FIFO_FLUSH);
-				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val);
+				ctrl->reg_write(ctrl,
+						ctrl->reg_layout[SWRM_REG_CMD_FIFO_RD_CMD],
+						val);
 			}
 			retry_attempt++;
 		} else {
@@ -564,7 +607,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 	int ret = IRQ_HANDLED;
 	clk_prepare_enable(ctrl->hclk);
 
-	ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts);
+	ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_STATUS],
+		       &intr_sts);
 	intr_sts_masked = intr_sts & ctrl->intr_mask;
 
 	do {
@@ -602,29 +646,39 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 						"%s: SWR bus clsh detected\n",
 						__func__);
 				ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-				ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
+				ctrl->reg_write(ctrl,
+						ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
+						ctrl->intr_mask);
 				break;
 			case SWRM_INTERRUPT_STATUS_RD_FIFO_OVERFLOW:
-				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				ctrl->reg_read(ctrl,
+					       ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS],
+					       &value);
 				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR read FIFO overflow fifo status 0x%x\n",
 					__func__, value);
 				break;
 			case SWRM_INTERRUPT_STATUS_RD_FIFO_UNDERFLOW:
-				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				ctrl->reg_read(ctrl,
+					       ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS],
+					       &value);
 				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR read FIFO underflow fifo status 0x%x\n",
 					__func__, value);
 				break;
 			case SWRM_INTERRUPT_STATUS_WR_CMD_FIFO_OVERFLOW:
-				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				ctrl->reg_read(ctrl,
+					       ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS],
+					       &value);
 				dev_err(ctrl->dev,
 					"%s: SWR write FIFO overflow fifo status %x\n",
 					__func__, value);
 				ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1);
 				break;
 			case SWRM_INTERRUPT_STATUS_CMD_ERROR:
-				ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value);
+				ctrl->reg_read(ctrl,
+					       ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS],
+					       &value);
 				dev_err_ratelimited(ctrl->dev,
 					"%s: SWR CMD error, fifo status 0x%x, flushing fifo\n",
 					__func__, value);
@@ -636,7 +690,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 						__func__);
 				ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION;
 				ctrl->reg_write(ctrl,
-					SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
+						ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
+						ctrl->intr_mask);
 				break;
 			case SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH:
 				dev_err_ratelimited(ctrl->dev,
@@ -645,7 +700,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 				ctrl->intr_mask &=
 					~SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH;
 				ctrl->reg_write(ctrl,
-					SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
+						ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
+						ctrl->intr_mask);
 				break;
 			case SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED:
 				complete(&ctrl->broadcast);
@@ -664,8 +720,10 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 				break;
 			}
 		}
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, intr_sts);
-		ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts);
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR],
+				intr_sts);
+		ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_STATUS],
+			       &intr_sts);
 		intr_sts_masked = intr_sts & ctrl->intr_mask;
 	} while (intr_sts_masked);
 
@@ -690,7 +748,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 
 	ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK;
 	/* Mask soundwire interrupts */
-	ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR,
+	ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
 			SWRM_INTERRUPT_STATUS_RMSK);
 
 	/* Configure No pings */
@@ -723,7 +781,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 
 	/* enable CPU IRQs */
 	if (ctrl->mmio) {
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN,
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
 				SWRM_INTERRUPT_STATUS_RMSK);
 	}
 	ctrl->slave_status = 0;
@@ -1312,7 +1370,7 @@ static int swrm_reg_show(struct seq_file *s_file, void *data)
 		return ret;
 	}
 
-	for (reg = 0; reg <= SWR_MSTR_MAX_REG_ADDR; reg += 4) {
+	for (reg = 0; reg <= ctrl->max_reg; reg += 4) {
 		ctrl->reg_read(ctrl, reg, &reg_val);
 		seq_printf(s_file, "0x%.3x: 0x%.2x\n", reg, reg_val);
 	}
@@ -1340,6 +1398,8 @@ static int qcom_swrm_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	data = of_device_get_match_data(dev);
+	ctrl->max_reg = data->max_reg;
+	ctrl->reg_layout = data->reg_layout;
 	ctrl->rows_index = sdw_find_row_index(data->default_rows);
 	ctrl->cols_index = sdw_find_col_index(data->default_cols);
 #if IS_REACHABLE(CONFIG_SLIMBUS)
@@ -1556,12 +1616,14 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
 		} else {
 			ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
 		}
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR,
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR],
 			SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET);
 
 		ctrl->intr_mask |= SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR, ctrl->intr_mask);
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+				ctrl->intr_mask);
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
+				ctrl->intr_mask);
 
 		usleep_range(100, 105);
 		if (!swrm_wait_for_frame_gen_enabled(ctrl))
@@ -1583,8 +1645,10 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev)
 	if (!ctrl->clock_stop_not_supported) {
 		/* Mask bus clash interrupt */
 		ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR, ctrl->intr_mask);
-		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask);
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+				ctrl->intr_mask);
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
+				ctrl->intr_mask);
 		/* Prepare slaves for clock stop */
 		ret = sdw_bus_prep_clk_stop(&ctrl->bus);
 		if (ret < 0 && ret != -ENODATA) {
-- 
2.34.1

[PATCH v3 6/7] soundwire: qcom: add support for v2.0.0 controller

[Krzysztof Kozlowski]

Add support for Qualcomm Soundwire Controller with a bit different
register layout.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Add tags.
---
 drivers/soundwire/qcom.c | 65 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 57 insertions(+), 8 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index eac566f168da..90afc8f15b82 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -31,6 +31,7 @@
 #define SWRM_VERSION_1_3_0					0x01030000
 #define SWRM_VERSION_1_5_1					0x01050001
 #define SWRM_VERSION_1_7_0					0x01070000
+#define SWRM_VERSION_2_0_0					0x02000000
 #define SWRM_COMP_HW_VERSION					0x00
 #define SWRM_COMP_CFG_ADDR					0x04
 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK			BIT(1)
@@ -42,6 +43,7 @@
 #define SWRM_COMP_PARAMS_DIN_PORTS_MASK				GENMASK(9, 5)
 #define SWRM_COMP_MASTER_ID					0x104
 #define SWRM_V1_3_INTERRUPT_STATUS				0x200
+#define SWRM_V2_0_INTERRUPT_STATUS				0x5000
 #define SWRM_INTERRUPT_STATUS_RMSK				GENMASK(16, 0)
 #define SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ			BIT(0)
 #define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED		BIT(1)
@@ -54,24 +56,32 @@
 #define SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION		BIT(8)
 #define SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH		BIT(9)
 #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED		BIT(10)
+#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED			BIT(11)
+#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL		BIT(12)
 #define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2             BIT(13)
 #define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2              BIT(14)
 #define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP               BIT(16)
 #define SWRM_INTERRUPT_MAX					17
 #define SWRM_V1_3_INTERRUPT_MASK_ADDR				0x204
 #define SWRM_V1_3_INTERRUPT_CLEAR				0x208
+#define SWRM_V2_0_INTERRUPT_CLEAR				0x5008
 #define SWRM_V1_3_INTERRUPT_CPU_EN				0x210
+#define SWRM_V2_0_INTERRUPT_CPU_EN				0x5004
 #define SWRM_V1_3_CMD_FIFO_WR_CMD				0x300
+#define SWRM_V2_0_CMD_FIFO_WR_CMD				0x5020
 #define SWRM_V1_3_CMD_FIFO_RD_CMD				0x304
+#define SWRM_V2_0_CMD_FIFO_RD_CMD				0x5024
 #define SWRM_CMD_FIFO_CMD					0x308
 #define SWRM_CMD_FIFO_FLUSH					0x1
 #define SWRM_V1_3_CMD_FIFO_STATUS				0x30C
+#define SWRM_V2_0_CMD_FIFO_STATUS				0x5050
 #define SWRM_RD_CMD_FIFO_CNT_MASK				GENMASK(20, 16)
 #define SWRM_WR_CMD_FIFO_CNT_MASK				GENMASK(12, 8)
 #define SWRM_CMD_FIFO_CFG_ADDR					0x314
 #define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE			BIT(31)
 #define SWRM_RD_WR_CMD_RETRIES					0x7
 #define SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR				0x318
+#define SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR				0x5040
 #define SWRM_RD_FIFO_CMD_ID_MASK				GENMASK(11, 8)
 #define SWRM_ENUMERATOR_CFG_ADDR				0x500
 #define SWRM_ENUMERATOR_SLAVE_DEV_ID_1(m)		(0x530 + 0x8 * (m))
@@ -98,6 +108,11 @@
 #define SWRM_DP_SAMPLECTRL2_BANK(n, m)	(0x113C + 0x100 * (n - 1) + 0x40 * m)
 #define SWRM_DIN_DPn_PCM_PORT_CTRL(n)	(0x1054 + 0x100 * (n - 1))
 #define SWR_V1_3_MSTR_MAX_REG_ADDR				0x1740
+#define SWR_V2_0_MSTR_MAX_REG_ADDR				0x50ac
+
+#define SWRM_V2_0_CLK_CTRL					0x5060
+#define SWRM_V2_0_CLK_CTRL_CLK_START				BIT(0)
+#define SWRM_V2_0_LINK_STATUS					0x5064
 
 #define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT				0x18
 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT				0x10
@@ -243,6 +258,26 @@ static const struct qcom_swrm_data swrm_v1_6_data = {
 	.reg_layout = swrm_v1_3_reg_layout,
 };
 
+static const unsigned int swrm_v2_0_reg_layout[] = {
+	[SWRM_REG_FRAME_GEN_ENABLED] = SWRM_V2_0_LINK_STATUS,
+	[SWRM_REG_INTERRUPT_STATUS] = SWRM_V2_0_INTERRUPT_STATUS,
+	[SWRM_REG_INTERRUPT_MASK_ADDR] = 0, /* Not present */
+	[SWRM_REG_INTERRUPT_CLEAR] = SWRM_V2_0_INTERRUPT_CLEAR,
+	[SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V2_0_INTERRUPT_CPU_EN,
+	[SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V2_0_CMD_FIFO_WR_CMD,
+	[SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V2_0_CMD_FIFO_RD_CMD,
+	[SWRM_REG_CMD_FIFO_STATUS] = SWRM_V2_0_CMD_FIFO_STATUS,
+	[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR,
+};
+
+static const struct qcom_swrm_data swrm_v2_0_data = {
+	.default_rows = 50,
+	.default_cols = 16,
+	.sw_clk_gate_required = true,
+	.max_reg = SWR_V2_0_MSTR_MAX_REG_ADDR,
+	.reg_layout = swrm_v2_0_reg_layout,
+};
+
 #define to_qcom_sdw(b)	container_of(b, struct qcom_swrm_ctrl, bus)
 
 static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg,
@@ -748,18 +783,23 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 
 	ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK;
 	/* Mask soundwire interrupts */
-	ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
-			SWRM_INTERRUPT_STATUS_RMSK);
+	if (ctrl->version < SWRM_VERSION_2_0_0)
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+				SWRM_INTERRUPT_STATUS_RMSK);
 
 	/* Configure No pings */
 	ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val);
 	u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK);
 	ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
 
-	if (ctrl->version >= SWRM_VERSION_1_7_0) {
+	if (ctrl->version == SWRM_VERSION_1_7_0) {
 		ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
 		ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
 				SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
+	} else if (ctrl->version >= SWRM_VERSION_2_0_0) {
+		ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
+		ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL,
+				SWRM_V2_0_CLK_CTRL_CLK_START);
 	} else {
 		ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
 	}
@@ -1609,10 +1649,14 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
 	} else {
 		reset_control_reset(ctrl->audio_cgcr);
 
-		if (ctrl->version >= SWRM_VERSION_1_7_0) {
+		if (ctrl->version == SWRM_VERSION_1_7_0) {
 			ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
 			ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
 					SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
+		} else if (ctrl->version >= SWRM_VERSION_2_0_0) {
+			ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
+			ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL,
+					SWRM_V2_0_CLK_CTRL_CLK_START);
 		} else {
 			ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
 		}
@@ -1620,8 +1664,10 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
 			SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET);
 
 		ctrl->intr_mask |= SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
-				ctrl->intr_mask);
+		if (ctrl->version < SWRM_VERSION_2_0_0)
+			ctrl->reg_write(ctrl,
+					ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+					ctrl->intr_mask);
 		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
 				ctrl->intr_mask);
 
@@ -1645,8 +1691,10 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev)
 	if (!ctrl->clock_stop_not_supported) {
 		/* Mask bus clash interrupt */
 		ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
-				ctrl->intr_mask);
+		if (ctrl->version < SWRM_VERSION_2_0_0)
+			ctrl->reg_write(ctrl,
+					ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+					ctrl->intr_mask);
 		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
 				ctrl->intr_mask);
 		/* Prepare slaves for clock stop */
@@ -1684,6 +1732,7 @@ static const struct of_device_id qcom_swrm_of_match[] = {
 	{ .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data },
 	{ .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data },
 	{ .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data },
+	{ .compatible = "qcom,soundwire-v2.0.0", .data = &swrm_v2_0_data },
 	{/* sentinel */},
 };
 
-- 
2.34.1

[PATCH v3 7/7] soundwire: qcom: use tabs for indentation in defines

[Krzysztof Kozlowski]

Use consistently only tabs to indent the value in defines.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Add tags.
---
 drivers/soundwire/qcom.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 90afc8f15b82..aad5942e5980 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -58,9 +58,9 @@
 #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED		BIT(10)
 #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED			BIT(11)
 #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL		BIT(12)
-#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2             BIT(13)
-#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2              BIT(14)
-#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP               BIT(16)
+#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2		BIT(13)
+#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2		BIT(14)
+#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP		BIT(16)
 #define SWRM_INTERRUPT_MAX					17
 #define SWRM_V1_3_INTERRUPT_MASK_ADDR				0x204
 #define SWRM_V1_3_INTERRUPT_CLEAR				0x208
@@ -125,20 +125,20 @@
 #define SWRM_REG_VAL_PACK(data, dev, id, reg)	\
 			((reg) | ((id) << 16) | ((dev) << 20) | ((data) << 24))
 
-#define MAX_FREQ_NUM		1
-#define TIMEOUT_MS		100
-#define QCOM_SWRM_MAX_RD_LEN	0x1
-#define QCOM_SDW_MAX_PORTS	14
-#define DEFAULT_CLK_FREQ	9600000
-#define SWRM_MAX_DAIS		0xF
-#define SWR_INVALID_PARAM 0xFF
-#define SWR_HSTOP_MAX_VAL 0xF
-#define SWR_HSTART_MIN_VAL 0x0
-#define SWR_BROADCAST_CMD_ID    0x0F
-#define SWR_MAX_CMD_ID	14
-#define MAX_FIFO_RD_RETRY 3
-#define SWR_OVERFLOW_RETRY_COUNT 30
-#define SWRM_LINK_STATUS_RETRY_CNT 100
+#define MAX_FREQ_NUM						1
+#define TIMEOUT_MS						100
+#define QCOM_SWRM_MAX_RD_LEN					0x1
+#define QCOM_SDW_MAX_PORTS					14
+#define DEFAULT_CLK_FREQ					9600000
+#define SWRM_MAX_DAIS						0xF
+#define SWR_INVALID_PARAM					0xFF
+#define SWR_HSTOP_MAX_VAL					0xF
+#define SWR_HSTART_MIN_VAL					0x0
+#define SWR_BROADCAST_CMD_ID					0x0F
+#define SWR_MAX_CMD_ID						14
+#define MAX_FIFO_RD_RETRY					3
+#define SWR_OVERFLOW_RETRY_COUNT				30
+#define SWRM_LINK_STATUS_RETRY_CNT				100
 
 enum {
 	MASTER_ID_WSA = 1,
-- 
2.34.1

Re: [PATCH v3 0/7] soundwire: qcom: add support for SM8550 (Soundwire v2.0.0)

[Vinod Koul]

On 18-04-23, 11:54, Krzysztof Kozlowski wrote:
> Hi,
> 
> Changes since v2:
> 1. Use uint16 for qcom,ports-sinterval.
>    DTS will be fixed in separate patchset.
> 2. Add tags.
> 
> Changes since v1:
> 1. Patch 1: Increase maxItems to 16 for port-related properties.
> 2. Re-order patch 1 and 2.
> 3. Patch 3: Drop unneeded semicolon.
> 4. Patch 5: Fix lang typo in subject.

Applied, thanks

-- 
~Vinod