Re: [PATCH 3/3] arm64: dts: qcom: sdm670: add missing usb hstx nvmem cell

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 07/12/2022 00:17, Richard Acayan wrote:
> This nvmem cell is present on SDM670 as well as SDM845. Add it in SDM670
> so there is proper tuning.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> Changes since v1:
>   - remove "primary" indicator (SDM670 only has one USB controller)
> 
>   arch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
> index c78156e03d93..fcea26ba7fe9 100644
> --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
> @@ -736,6 +736,11 @@ qfprom: qfprom@784000 {
>   			reg = <0 0x00784000 0 0x1000>;
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> +
> +			qusb2_hstx_trim: hstx-trim@1eb {
> +				reg = <0x1eb 0x1>;
> +				bits = <1 4>;
> +			};
>   		};
>   
>   		sdhc_1: mmc@7c4000 {
> @@ -1418,6 +1423,8 @@ usb_1_hsphy: phy@88e2000 {
>   
>   			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>   
> +			nvmem-cells = <&qusb2_hstx_trim>;
> +
>   			status = "disabled";
>   		};
>