Re: [PATCH 01/33] arm64: dts: ti: k3-j7200: Enable remote processors at board level

["Kumar, Udit" <u-kumar1@ti.com>]

Hello Beleswar,

On 8/15/2025 4:08 AM, Beleswar Padhi wrote:
> Remote Processors defined in top-level J7200 SoC dtsi files are
> incomplete without the memory carveouts and mailbox assignments which
> are only known at board integration level.
>
> Therefore, disable the remote processors at SoC level and enable them at
> board level where above information is available.
>
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-j7200-main.dtsi       | 3 +++
>   arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 3 +++
>   arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi     | 9 +++++++++
>   3 files changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> index 5ce5f0a3d6f5..628ff89dd72f 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> @@ -1516,6 +1516,7 @@ main_r5fss0: r5fss@5c00000 {
>   		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
>   			 <0x5d00000 0x00 0x5d00000 0x20000>;
>   		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
>   
>   		main_r5fss0_core0: r5f@5c00000 {
>   			compatible = "ti,j7200-r5f";
> @@ -1530,6 +1531,7 @@ main_r5fss0_core0: r5f@5c00000 {
>   			ti,atcm-enable = <1>;
>   			ti,btcm-enable = <1>;
>   			ti,loczrama = <1>;
> +			status = "disabled";
>   		};
>   
>   		main_r5fss0_core1: r5f@5d00000 {
> @@ -1545,6 +1547,7 @@ main_r5fss0_core1: r5f@5d00000 {
>   			ti,atcm-enable = <1>;
>   			ti,btcm-enable = <1>;
>   			ti,loczrama = <1>;
> +			status = "disabled";
>   		};
>   	};
>   
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 56ab144fea07..692c4745040e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -612,6 +612,7 @@ mcu_r5fss0: r5fss@41000000 {
>   		ranges = <0x41000000 0x00 0x41000000 0x20000>,
>   			 <0x41400000 0x00 0x41400000 0x20000>;
>   		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
>   

Please leave boot critical fw as is.

Here are my suggestions

  create one boot-critical-fw-dtsi for mcu_r5fss0 , include this fw 
files in all boards.

other IPC optional firmware can reside in one dtsi or dtso,


> [..]