Re: [PATCH v2 2/4] arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 PMIC

["André Draszik" <andre.draszik@linaro.org>]

Hi Krzysztof,

On Thu, 2025-06-26 at 21:49 +0200, Krzysztof Kozlowski wrote:
> On 24/05/2025 07:21, André Draszik wrote:
> > +
> > +		gpio {
> > +			compatible = "maxim,max77759-gpio";
> > +
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +			/*
> > +			 * "Human-readable name [SIGNAL_LABEL]" where the
> > +			 * latter comes from the schematic
> > +			 */
> > +			gpio-line-names = "OTG boost [OTG_BOOST_EN]",
> > +					  "max20339 IRQ [MW_OVP_INT_L]";
> > +
> > +			interrupt-controller;
> > +			#interrupt-cells = <2>;
> > +		};
> > +
> > +		nvmem-0 {
> 
> Why is this called nvmem-0, not nvmem? Is there nvmem-1? I see binding
> does it, but why?

'nvmem' is used/declared by nvmem-consumer.yaml as a phandle array
already so using just 'nvmem' fails validation:

Documentation/devicetree/bindings/mfd/maxim,max77759.example.dtb: pmic@66: nvmem: {'compatible': ['maxim,max77759-nvmem'], 'nvmem-
layout': {'compatible': ['fixed-layout'], '#address-cells': 1, '#size-cells': 1, 'reboot-mode@0': {'reg': [[0, 4]]}, 'boot-reason@4':
{'reg': [[4, 4]]}, 'shutdown-user-flag@8': {'reg': [[8, 1]]}, 'rsoc@10': {'reg': [[10, 2]]}}} is not of type 'array'
	from schema $id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml#

https://lore.kernel.org/all/20250226-max77759-mfd-v2-3-a65ebe2bc0a9@linaro.org/

Cheers,
Andre'