* [PATCH v3 2/2] dt-bindings: add bindings for QCOM flash LED [not found] <20221018014024.948731-1-quic_fenglinw@quicinc.com> @ 2022-10-18 1:40 ` Fenglin Wu 2022-10-19 13:36 ` Krzysztof Kozlowski 0 siblings, 1 reply; 3+ messages in thread From: Fenglin Wu @ 2022-10-18 1:40 UTC (permalink / raw) To: linux-arm-msm, linux-kernel, krzysztof.kozlowski, Andy Gross, Bjorn Andersson, Konrad Dybcio, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Fenglin Wu, linux-leds, devicetree Cc: quic_collinsd, quic_subbaram Add binding document for flash LED module inside Qualcomm Technologies, Inc. PMICs. Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> --- .../bindings/leds/qcom,spmi-flash-led.yaml | 116 ++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml new file mode 100644 index 000000000000..d8efde02db72 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Flash LED device inside Qualcomm Technologies, Inc. PMICs + +maintainers: + - Fenglin Wu <quic_fenglinw@quicinc.com> + +description: | + Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs. + The flash LED module can have different number of LED channels supported + e.g. 3 or 4. There are some different registers between them but they can + both support maximum current up to 1.5 A per channel and they can also support + ganging 2 channels together to supply maximum current up to 2 A. The current + will be split symmetrically on each channel and they will be enabled and + disabled at the same time. + +properties: + compatible: + items: + - enum: + - qcom,pm8150c-flash-led + - qcom,pm8150l-flash-led + - qcom,pm8350c-flash-led + - const: qcom,spmi-flash-led + reg: + description: address offset of the flash LED controller + maxItems: 1 + +patternProperties: + "^led-[0-3]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + description: | + Represents the physical LED components which are connected to the + flash LED channels' output. + + properties: + led-sources: + description: | + The HW indices of the flash LED channels that connect to the + physical LED + allOf: + - minItems: 1 + maxItems: 2 + items: + enum: [1, 2, 3, 4] + + led-max-microamp: + anyOf: + - minimum: 5000 + maximum: 500000 + multipleOf: 5000 + - minimum: 10000 + maximum: 1000000 + multipleOf: 10000 + + flash-max-microamp: + anyOf: + - minimum: 12500 + maximum: 1500000 + multipleOf: 12500 + - minimum: 25000 + maximum: 2000000 + multipleOf: 25000 + + flash-max-timeout-us: + minimum: 10000 + maximum: 1280000 + multipleOf: 10000 + + required: + - led-sources + - led-max-microamp + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + spmi { + #address-cells = <1>; + #size-cells = <0>; + led-controller@ee00 { + compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <4>; + led-max-microamp = <300000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>, <3>; + led-max-microamp = <300000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; + }; + }; -- 2.25.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: add bindings for QCOM flash LED 2022-10-18 1:40 ` [PATCH v3 2/2] dt-bindings: add bindings for QCOM flash LED Fenglin Wu @ 2022-10-19 13:36 ` Krzysztof Kozlowski 2022-10-20 6:33 ` Fenglin Wu 0 siblings, 1 reply; 3+ messages in thread From: Krzysztof Kozlowski @ 2022-10-19 13:36 UTC (permalink / raw) To: Fenglin Wu, linux-arm-msm, linux-kernel, Andy Gross, Bjorn Andersson, Konrad Dybcio, Pavel Machek, Rob Herring, Krzysztof Kozlowski, linux-leds, devicetree Cc: quic_collinsd, quic_subbaram On 17/10/2022 21:40, Fenglin Wu wrote: > Add binding document for flash LED module inside Qualcomm Technologies, > Inc. PMICs. Use subject prefixes matching the subsystem (git log --oneline -- ...). This means: 1. you miss subsystem prefix 2. drop redundant second "bindings" > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> > --- > .../bindings/leds/qcom,spmi-flash-led.yaml | 116 ++++++++++++++++++ > 1 file changed, 116 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > > diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > new file mode 100644 > index 000000000000..d8efde02db72 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > @@ -0,0 +1,116 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Flash LED device inside Qualcomm Technologies, Inc. PMICs > + > +maintainers: > + - Fenglin Wu <quic_fenglinw@quicinc.com> > + > +description: | > + Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs. > + The flash LED module can have different number of LED channels supported > + e.g. 3 or 4. There are some different registers between them but they can > + both support maximum current up to 1.5 A per channel and they can also support > + ganging 2 channels together to supply maximum current up to 2 A. The current > + will be split symmetrically on each channel and they will be enabled and > + disabled at the same time. > + > +properties: > + compatible: > + items: > + - enum: > + - qcom,pm8150c-flash-led > + - qcom,pm8150l-flash-led > + - qcom,pm8350c-flash-led > + - const: qcom,spmi-flash-led Blank line > + reg: > + description: address offset of the flash LED controller Drop description, it's obvious. > + maxItems: 1 > + > +patternProperties: > + "^led-[0-3]$": > + type: object > + $ref: common.yaml# > + unevaluatedProperties: false > + description: | No need for | > + Represents the physical LED components which are connected to the > + flash LED channels' output. > + > + properties: > + led-sources: > + description: | No need for | Rest looks good: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: add bindings for QCOM flash LED 2022-10-19 13:36 ` Krzysztof Kozlowski @ 2022-10-20 6:33 ` Fenglin Wu 0 siblings, 0 replies; 3+ messages in thread From: Fenglin Wu @ 2022-10-20 6:33 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-arm-msm, linux-kernel, Andy Gross, Bjorn Andersson, Konrad Dybcio, Pavel Machek, Rob Herring, Krzysztof Kozlowski, linux-leds, devicetree Cc: quic_collinsd, quic_subbaram On 2022/10/19 21:36, Krzysztof Kozlowski wrote: > On 17/10/2022 21:40, Fenglin Wu wrote: >> Add binding document for flash LED module inside Qualcomm Technologies, >> Inc. PMICs. > > Use subject prefixes matching the subsystem (git log --oneline -- ...). > > This means: > 1. you miss subsystem prefix > 2. drop redundant second "bindings" > >> >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >> --- >> .../bindings/leds/qcom,spmi-flash-led.yaml | 116 ++++++++++++++++++ >> 1 file changed, 116 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml >> >> diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml >> new file mode 100644 >> index 000000000000..d8efde02db72 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml >> @@ -0,0 +1,116 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Flash LED device inside Qualcomm Technologies, Inc. PMICs >> + >> +maintainers: >> + - Fenglin Wu <quic_fenglinw@quicinc.com> >> + >> +description: | >> + Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs. >> + The flash LED module can have different number of LED channels supported >> + e.g. 3 or 4. There are some different registers between them but they can >> + both support maximum current up to 1.5 A per channel and they can also support >> + ganging 2 channels together to supply maximum current up to 2 A. The current >> + will be split symmetrically on each channel and they will be enabled and >> + disabled at the same time. >> + >> +properties: >> + compatible: >> + items: >> + - enum: >> + - qcom,pm8150c-flash-led >> + - qcom,pm8150l-flash-led >> + - qcom,pm8350c-flash-led >> + - const: qcom,spmi-flash-led > > Blank line > >> + reg: >> + description: address offset of the flash LED controller > > Drop description, it's obvious. > >> + maxItems: 1 >> + >> +patternProperties: >> + "^led-[0-3]$": >> + type: object >> + $ref: common.yaml# >> + unevaluatedProperties: false >> + description: | > > No need for | > >> + Represents the physical LED components which are connected to the >> + flash LED channels' output. >> + >> + properties: >> + led-sources: >> + description: | > > No need for | > > Rest looks good: > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Best regards, > Krzysztof > Thanks you Krzysztof! I will address them when pushing next patch. ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-10-20 6:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20221018014024.948731-1-quic_fenglinw@quicinc.com>
2022-10-18 1:40 ` [PATCH v3 2/2] dt-bindings: add bindings for QCOM flash LED Fenglin Wu
2022-10-19 13:36 ` Krzysztof Kozlowski
2022-10-20 6:33 ` Fenglin Wu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).