Re: [PATCH v1 1/2] dt-bindings: spi: add loongson spi

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 13/03/2023 03:09, zhuyinbo wrote:
> 
> 在 2023/3/9 下午3:22, zhuyinbo 写道:
>>
>> 在 2023/3/9 下午2:23, Krzysztof Kozlowski 写道:
>>> On 09/03/2023 03:08, zhuyinbo wrote:
>>>> 在 2023/3/8 下午7:30, Krzysztof Kozlowski 写道:
>>>>> On 08/03/2023 03:59, Yinbo Zhu wrote:
>>>>>> Add the Loongson platform spi binding with DT schema format using
>>>>>> json-schema.
>>>>>>
>>>>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>>>>>> ---
>>>>>>    .../bindings/spi/loongson,ls-spi.yaml         | 47 
>>>>>> +++++++++++++++++++
>>>>>>    MAINTAINERS                                   |  6 +++
>>>>>>    2 files changed, 53 insertions(+)
>>>>>>    create mode 100644 
>>>>>> Documentation/devicetree/bindings/spi/loongson,ls-spi.yaml
>>>>> Filename matching the compatible.
>>>> loongson,ls-spi.yaml is for ls2k-spi and ls7a-spi, I will add following
>>>> desription:
>>>>
>>>>
>>>> properties:
>>>>     compatible:
>>>>       enum:
>>>>         - loongson,ls2k-spi
>>>>         - loongson,ls7a-spi
>>> OK then.
>>
>> I was to explain why that yaml was name as "loongson,ls-spi.yaml" 
>> rather than "loongson,ls2k-spi.yaml"
>>
>> because that need consider about  yaml filename to match 
>> "loongson,ls2k-spi" and "loongson,ls7a-spi".
>>
>>>
>>>>>> diff --git 
>>>>>> a/Documentation/devicetree/bindings/spi/loongson,ls-spi.yaml 
>>>>>> b/Documentation/devicetree/bindings/spi/loongson,ls-spi.yaml
>>>>>> new file mode 100644
>>>>>> index 000000000000..8a13a96b3818
>>>>>> --- /dev/null
>>>>>> +++ b/Documentation/devicetree/bindings/spi/loongson,ls-spi.yaml
>>>>>> @@ -0,0 +1,47 @@
>>>>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>>>>> +
>>>>>> +%YAML 1.2
>>>>>> +---
>>>>>> +$id: "http://devicetree.org/schemas/spi/loongson,ls-spi.yaml#"
>>>>>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>>>>> Drop the quotes. What was the base of your code here?
>>>> okay, I will drop the quotes.    and I don't got it  about the code 
>>>> base
>>>> that you said.
>>>>
>>>> you meaning is advice me add a line  as follows ?
>>> I meant, from which other file did you copy it?
>> okay,  but I maybe forgot it,  I should be refer other spi yaml file.
>>>
>>>>>> +
>>>>>> +  clock-names:
>>>>>> +    const: boot
>>>>> Drop clock-names, not needed for single entry.
>>>> if drop the clock-names entry, the yaml file will compile fail.
>>> Obviously you have to also drop it from DTS and driver...
>>
>> drop clock-names should be not  affect my driver,  but I notice other 
>> lots of arm64 platform dts
>>
>> was keep clock-names and clock in dts when use grep search "clock-names".
>>
>> [zhuyinbo@localhost www.kernel.org]$ grep -rns "clock-names" arch/arm64/
>>
>> arch/arm64/boot/dts/sprd/sc9863a.dtsi:280:            clock-names = 
>> "apb_pclk";
>> arch/arm64/boot/dts/sprd/sc9863a.dtsi:305:            clock-names = 
>> "apb_pclk";
>> arch/arm64/boot/dts/sprd/sc9863a.dtsi:330:            clock-names = 
>> "apb_pclk";
>> arch/arm64/boot/dts/sprd/sc9863a.dtsi:367:            clock-names = 
>> "apb_pclk";
> 
> so , if you think it is okay I will keep clock-names and clock in yaml 
> file like other platform.

No, it's not ok.

Best regards,
Krzysztof