Re: [PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: Add reserved memory region

[Joel Selvaraj <joelselvaraj.oss@gmail.com>]

Hi Amit Pundir,

I have a Poco F1 (EBBG) variant and I can confirm that the framebuffer
address is same for the EBBG variant too.

I did a quick check by running the following command based on this link[1]:

xiber:~$ strings /dev/disk/by-partlabel/xbl_a | grep "Display Reserved"

0x9D400000, 0x02400000, "Display Reserved",  AddMem, MEM_RES,
SYS_MEM_CAP, Reserv, WRITE_BACK_XN

So I think it's safe to move this to sdm845-xiaomi-beryllium-common.dtsi

Regards,
Joel Selvaraj

[1]
https://wiki.postmarketos.org/wiki/SDM845_Mainlining#Find_the_framebuffer_address




On 24/01/23 12:32, Amit Pundir wrote:
> Put cont splash memory region under the reserved-memory as
> confirmed by the downstream code for Tianma variant as well.
> 
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> ---
> This change should probably go in sdm845-xiaomi-beryllium-common but
> I don't have EBBG variant's downstream code nor the device to test.
> 
>  .../boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts      | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
> index 8e176111e599..47cbf725b0e3 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
> @@ -7,6 +7,14 @@
>  / {
>  	model = "Xiaomi Pocophone F1 (Tianma)";
>  	compatible = "xiaomi,beryllium", "qcom,sdm845";
> +
> +	reserved-memory {
> +		/* Cont splash region set up by the bootloader */
> +		cont_splash_mem: framebuffer@9d400000 {
> +			reg = <0x0 0x9d400000 0x0 0x2400000>;
> +			no-map;
> +		};
> +	};
>  };
>  
>  &display_panel {