From: Nicolas Ferre <nicolas.ferre@microchip.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Antoine Aubert <a.aubert@overkiz.com>,
devicetree@vger.kernel.org,
Douglas Gilbert <dgilbert@interlog.com>,
Fabio Porcedda <fabio.porcedda@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
Joachim Eastwood <manabian@gmail.com>,
Marek Vasut <marex@denx.de>,
Martin Reimann <martin.reimann@egnite.de>,
Peter Rosin <peda@axentia.se>,
Raashid Muhammed <raashidmuhammed@zilogic.com>,
Rob Herring <robh+dt@kernel.org>,
Rodolfo Giometti <giometti@linux.it>,
Sergio Tanzilli <tanzilli@acmesystems.it>,
Tim Schendekehl <tim.schendekehl@egnite.de>
Subject: Re: [PATCH 00/45] Migrate TCB bindings
Date: Wed, 20 Dec 2017 09:14:28 +0100 [thread overview]
Message-ID: <b4bc2155-4b98-b295-06bc-30f60fca4c4b@microchip.com> (raw)
In-Reply-To: <20171219213209.13823-1-alexandre.belloni@free-electrons.com>
On 19/12/2017 at 22:31, Alexandre Belloni wrote:
> Hi,
>
> As the bindings were acked by Rob a while ago [1] and I think there is
> consensus on what they look like, I'm planning to apply that series for
> 4.16 so we get a smoother transition for the TCB driver rework.
>
> I've simply removed the PWM binding change that I will submit with the
> driver change itself.
> There is also a small fix in the at91sam9261ek patch.
>
> [1] https://patchwork.kernel.org/patch/9755341/
>
> Cc: Antoine Aubert <a.aubert@overkiz.com>
> Cc: devicetree@vger.kernel.org
> Cc: Douglas Gilbert <dgilbert@interlog.com>
> Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
> Cc: Joachim Eastwood <manabian@gmail.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Martin Reimann <martin.reimann@egnite.de>
> Cc: Peter Rosin <peda@axentia.se>
> Cc: Raashid Muhammed <raashidmuhammed@zilogic.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Rodolfo Giometti <giometti@linux.it>
> Cc: Sergio Tanzilli <tanzilli@acmesystems.it>
> Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
>
> Alexandre Belloni (45):
> ARM: at91: Document new TCB bindings
> ARM: dts: at91: at91rm9200: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91rm9200ek: use TCB0 for timers
> ARM: dts: at91: mpa1600: use TCB0 as timers
> ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9260ek: use TCB0 as timers
> ARM: dts: at91: sam9_l9260: use TCB0 as timers
> ARM: dts: at91: ethernut5: use TCB0 as timers
> ARM: dts: at91: foxg20: use TCB0 as timers
> ARM: dts: at91: animeo_ip: use TCB0 as timers
> ARM: dts: at91: kizbox: use TCB0 as timers
> ARM: dts: at91: at91sam9g20ek: use TCB0 as timers
> ARM: dts: at91: ge863-pro3: use TCB0 as timers
> ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9261ek: use TCB0 as timers
> ARM: dts: at91: at91sam9263: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9263ek: use TCB0 as timers
> ARM: dts: at91: calao: use TCB0 as timers
> ARM: dts: at91: at91sam9g45: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9m10g45ek: use TCB0 as timers
> ARM: dts: at91: pm9g45: use TCB0 as timers
> ARM: dts: at91: at91sam9rl: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9rlek: use TCB0 as timers
> ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9n12ek: use TCB0 as timers
> ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: at91sam9x5cm: use TCB0 as timers
> ARM: dts: at91: acme/g25: use TCB0 as timers
> ARM: dts: at91: cosino: use TCB0 as timers
> ARM: dts: at91: kizboxmini: use TCB0 as timers
> ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: sama5d3xek: use TCB0 as timers
> ARM: dts: at91: sama5d3 Xplained: use TCB0 as timers
> ARM: dts: at91: kizbox2: use TCB0 as timers
> ARM: dts: at91: sama5d3xek_cmp: use TCB0 as timers
> ARM: dts: at91: linea/tse850-3: use TCB0 as timers
> ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: sama5d4: Add TCB2
> ARM: dts: at91: sama5d4ek: use TCB2 as timers
> ARM: dts: at91: sama5d4 Xplained: use TCB2 as timers
> ARM: dts: at91: ma5d4: use TCB2 as timers
> ARM: dts: at91: vinco: use TCB2 as timers
> ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon
> devices
> ARM: dts: at91: sama5d2 Xplained: use TCB0 as timers
> ARM: dts: at91: sama5d27_som1_ek: use TCB0 as timers
For the whole series:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Thanks, best regards,
Nicolas
> .../devicetree/bindings/arm/atmel-at91.txt | 32 -------------
> .../devicetree/bindings/mfd/atmel-tcb.txt | 56 ++++++++++++++++++++++
> arch/arm/boot/dts/animeo_ip.dts | 12 +++++
> arch/arm/boot/dts/at91-ariag25.dts | 12 +++++
> arch/arm/boot/dts/at91-ariettag25.dts | 12 +++++
> arch/arm/boot/dts/at91-cosino.dtsi | 12 +++++
> arch/arm/boot/dts/at91-foxg20.dts | 12 +++++
> arch/arm/boot/dts/at91-kizbox.dts | 12 +++++
> arch/arm/boot/dts/at91-kizbox2.dts | 12 +++++
> arch/arm/boot/dts/at91-kizboxmini.dts | 12 +++++
> arch/arm/boot/dts/at91-linea.dtsi | 12 +++++
> arch/arm/boot/dts/at91-qil_a9260.dts | 12 +++++
> arch/arm/boot/dts/at91-sam9_l9260.dts | 12 +++++
> arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +++++
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 12 +++++
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 12 +++++
> arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 12 +++++
> arch/arm/boot/dts/at91-sama5d4_xplained.dts | 12 +++++
> arch/arm/boot/dts/at91-sama5d4ek.dts | 12 +++++
> arch/arm/boot/dts/at91-vinco.dts | 12 +++++
> arch/arm/boot/dts/at91rm9200.dtsi | 8 +++-
> arch/arm/boot/dts/at91rm9200ek.dts | 12 +++++
> arch/arm/boot/dts/at91sam9260.dtsi | 8 +++-
> arch/arm/boot/dts/at91sam9260ek.dts | 12 +++++
> arch/arm/boot/dts/at91sam9261.dtsi | 4 +-
> arch/arm/boot/dts/at91sam9261ek.dts | 20 ++++++++
> arch/arm/boot/dts/at91sam9263.dtsi | 4 +-
> arch/arm/boot/dts/at91sam9263ek.dts | 12 +++++
> arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 12 +++++
> arch/arm/boot/dts/at91sam9g45.dtsi | 8 +++-
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 12 +++++
> arch/arm/boot/dts/at91sam9n12.dtsi | 8 +++-
> arch/arm/boot/dts/at91sam9n12ek.dts | 12 +++++
> arch/arm/boot/dts/at91sam9rl.dtsi | 4 +-
> arch/arm/boot/dts/at91sam9rlek.dts | 12 +++++
> arch/arm/boot/dts/at91sam9x5.dtsi | 8 +++-
> arch/arm/boot/dts/at91sam9x5cm.dtsi | 12 +++++
> arch/arm/boot/dts/ethernut5.dts | 12 +++++
> arch/arm/boot/dts/ge863-pro3.dtsi | 12 +++++
> arch/arm/boot/dts/mpa1600.dts | 12 +++++
> arch/arm/boot/dts/pm9g45.dts | 12 +++++
> arch/arm/boot/dts/sama5d2.dtsi | 8 +++-
> arch/arm/boot/dts/sama5d3.dtsi | 4 +-
> arch/arm/boot/dts/sama5d3_tcb1.dtsi | 4 +-
> arch/arm/boot/dts/sama5d3xcm.dtsi | 12 +++++
> arch/arm/boot/dts/sama5d3xcm_cmp.dtsi | 12 +++++
> arch/arm/boot/dts/sama5d4.dtsi | 18 ++++++-
> arch/arm/boot/dts/tny_a9260_common.dtsi | 12 +++++
> arch/arm/boot/dts/tny_a9263.dts | 12 +++++
> arch/arm/boot/dts/usb_a9260_common.dtsi | 12 +++++
> arch/arm/boot/dts/usb_a9263.dts | 12 +++++
> 51 files changed, 575 insertions(+), 51 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt
>
--
Nicolas Ferre
prev parent reply other threads:[~2017-12-20 8:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 21:31 [PATCH 00/45] Migrate TCB bindings Alexandre Belloni
2017-12-19 21:31 ` [PATCH 01/45] ARM: at91: Document new " Alexandre Belloni
2017-12-20 8:14 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b4bc2155-4b98-b295-06bc-30f60fca4c4b@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=a.aubert@overkiz.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=dgilbert@interlog.com \
--cc=fabio.porcedda@gmail.com \
--cc=giometti@linux.it \
--cc=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manabian@gmail.com \
--cc=marex@denx.de \
--cc=martin.reimann@egnite.de \
--cc=peda@axentia.se \
--cc=raashidmuhammed@zilogic.com \
--cc=robh+dt@kernel.org \
--cc=tanzilli@acmesystems.it \
--cc=tim.schendekehl@egnite.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox