From: <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Subject: [PATCH] arm: dts: mt7623: enable all four available UARTs on bananapi-r2
Date: Fri, 22 Dec 2017 14:06:33 +0800 [thread overview]
Message-ID: <b4e84a68da76c1ca538150a730777ff530c1db5a.1513922513.git.sean.wang@mediatek.com> (raw)
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On bpi-r2 board, totally there're four uarts which we usually called
uart[0-3] helpful to extend slow I/O devices. Among those ones, uart2 has
dedicated pin slot which is used to conolse log. uart[0-1] appear at the
40-pins connector and uart3 has no pinout, but just has test points (TP47
for TX and TP48 for RX, respectively) nearby uart2. Also, some missing
pinctrl is being complemented for those devices.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 7bf5aa2..64bf5db 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -409,6 +409,20 @@
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
};
};
+
+ uart2_pins_a: uart@2 {
+ pins_dat {
+ pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
+ <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
+ };
+ };
+
+ uart3_pins_a: uart@3 {
+ pins_dat {
+ pinmux = <MT7623_PIN_242_URTS2_FUNC_URTS2>,
+ <MT7623_PIN_243_UCTS2_FUNC_UTXD3>;
+ };
+ };
};
&pwm {
@@ -454,16 +468,24 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
- status = "disabled";
+ status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
- status = "disabled";
+ status = "okay";
};
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
status = "okay";
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-12-22 6:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-22 6:06 sean.wang-NuS5LvNUpcJWk0Htik3J/w [this message]
[not found] ` <b4e84a68da76c1ca538150a730777ff530c1db5a.1513922513.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-12-22 6:24 ` [PATCH] arm: dts: mt7623: enable all four available UARTs on bananapi-r2 Sean Wang
2017-12-23 7:52 ` Matthias Brugger
[not found] ` <dc3c28c7-03c3-f1c6-39c1-b8df8be4fac3-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-12-23 15:35 ` Sean Wang
2018-01-23 8:51 ` Sean Wang
2018-02-07 16:01 ` Matthias Brugger
[not found] ` <cd1df7f9-89f4-06d5-5384-9f3b9f7ade48-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-02-09 3:55 ` Sean Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b4e84a68da76c1ca538150a730777ff530c1db5a.1513922513.git.sean.wang@mediatek.com \
--to=sean.wang-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).