devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	krzk@kernel.org, m.szyprowski@samsung.com,
	s.nawrocki@samsung.com, kgene@kernel.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	tomasz.figa@gmail.com, chanwoo@kernel.org,
	jh80.chung@samsung.com, inki.dae@samsung.com,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Jonghwa Lee <jonghwa3.lee@samsung.com>
Subject: Re: [PATCH 3/9] soc: samsung: pmu: Add the PMU data of exynos5433 to support low-power state
Date: Tue, 9 Jan 2018 14:11:57 +0000	[thread overview]
Message-ID: <b639da18-a069-aeb7-ceca-30c79b1c25c8@arm.com> (raw)
In-Reply-To: <1515484746-10656-4-git-send-email-cw00.choi@samsung.com>



On 09/01/18 07:59, Chanwoo Choi wrote:
> This patch adds the PMU (Power Management Unit) data of exynos5433 SoC
> in order to support the various power modes. Each power mode has
> the different value for reducing the power-consumption.
> 
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm/mach-exynos/common.h               |   2 -
>  drivers/soc/samsung/Makefile                |   3 +-
>  drivers/soc/samsung/exynos-pmu.c            |   1 +
>  drivers/soc/samsung/exynos-pmu.h            |   2 +
>  drivers/soc/samsung/exynos5433-pmu.c        | 286 ++++++++++++++++++++++++++++
>  include/linux/soc/samsung/exynos-regs-pmu.h | 148 ++++++++++++++
>  6 files changed, 439 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/soc/samsung/exynos5433-pmu.c
> 

> diff --git a/drivers/soc/samsung/exynos5433-pmu.c b/drivers/soc/samsung/exynos5433-pmu.c
> new file mode 100644
> index 000000000000..2571e61522f0
> --- /dev/null
> +++ b/drivers/soc/samsung/exynos5433-pmu.c
> @@ -0,0 +1,286 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2018 Samsung Electronics Co., Ltd.
> +// Copyright (c) Jonghwa Lee <jonghwa3.lee@samsung.com>
> +// Copyright (c) Chanwoo Choi <cw00.choi@samsung.com>
> +//
> +// EXYNOS5433 - CPU PMU (Power Management Unit) support
> +
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
> +#include <linux/soc/samsung/exynos-pmu.h>
> +
> +#include "exynos-pmu.h"
> +
> +static struct exynos_pmu_conf exynos5433_pmu_config[] = {
> +	/* { .offset = address,	.val = { AFTR, LPA, SLEEP } } */
> +	{ EXYNOS5433_ATLAS_CPU0_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_ATLAS_CPU0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_ATLAS_CPU1_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_ATLAS_CPU1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_ATLAS_CPU2_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_ATLAS_CPU2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_ATLAS_CPU3_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_ATLAS_CPU3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_APOLLO_CPU0_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_APOLLO_CPU0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_APOLLO_CPU1_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_APOLLO_CPU1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_APOLLO_CPU2_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_APOLLO_CPU2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_APOLLO_CPU3_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_DIS_IRQ_APOLLO_CPU3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0 } },
> +	{ EXYNOS5433_ATLAS_NONCPU_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },
> +	{ EXYNOS5433_APOLLO_NONCPU_SYS_PWR_REG,			{ 0x0, 0x0, 0x8 } },


1. First of all why do you need any of these CPU related PMU config
   registers in kernel ? From the information I gathered this is ARM64
   SoC using PSCI. These are needed just in PSCI implementation and not
   in kernel. So can you elaborate on why there are present here ?

2. Are there any public documents that these names map to ?
   If there is none, please replace these codenames(ATLAS, APOLLO) with
   appropriately.

Sorry if these are already answered, just point me to those threads.

-- 
Regards,
Sudeep

  parent reply	other threads:[~2018-01-09 14:11 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20180109075904epcas2p302d58aacfbb2195e455a25c90a1c610b@epcas2p3.samsung.com>
2018-01-09  7:58 ` [RFC PATCH 0/9] soc: samsung: Add support of suspend-to-RAM on Exynos5433 Chanwoo Choi
     [not found]   ` <CGME20180109075905epcas1p1486543d8fec46f47d9d5ac350d841337@epcas1p1.samsung.com>
2018-01-09  7:58     ` [PATCH 1/9] clk: samsung: exynos5433: Add clock flag to support suspend-to-ram Chanwoo Choi
     [not found]       ` <1515484746-10656-2-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-01-09 11:44         ` Krzysztof Kozlowski
2018-01-10  9:31           ` Chanwoo Choi
2018-01-12 13:24           ` Marek Szyprowski
     [not found]   ` <CGME20180109075905epcas1p4e601230d86dd686db28796165178dafa@epcas1p4.samsung.com>
2018-01-09  7:58     ` [PATCH 2/9] soc: samsung: pmu: Add powerup_conf callback Chanwoo Choi
2018-01-09 11:52       ` Krzysztof Kozlowski
     [not found]   ` <CGME20180109075905epcas1p321b8898a0d45287d63364e1aa768fdab@epcas1p3.samsung.com>
2018-01-09  7:59     ` [PATCH 3/9] soc: samsung: pmu: Add the PMU data of exynos5433 to support low-power state Chanwoo Choi
     [not found]       ` <1515484746-10656-4-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-01-09 12:23         ` Krzysztof Kozlowski
     [not found]           ` <CAJKOXPf027Nz4CsNt4i1yuiQVMtZpv8ncrbgP1D-y4YM8kn30A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-11  5:39             ` Chanwoo Choi
2018-01-09 12:33       ` Krzysztof Kozlowski
2018-01-09 14:11       ` Sudeep Holla [this message]
2018-01-10  1:46         ` Chanwoo Choi
2018-01-10 10:53           ` Sudeep Holla
2018-01-10 23:51             ` Chanwoo Choi
     [not found]   ` <CGME20180109075905epcas1p40431a90ecc3530f2200ade028bf54594@epcas1p4.samsung.com>
2018-01-09  7:59     ` [RFC PATCH 4/9] soc: samsung: Add generic power-management driver for Exynos Chanwoo Choi
2018-01-09 12:37       ` Krzysztof Kozlowski
2018-01-11  5:44         ` Chanwoo Choi
     [not found]   ` <CGME20180109075905epcas2p1fe6b554b646dbc80e04273ad6dd8489c@epcas2p1.samsung.com>
2018-01-09  7:59     ` [RFC PATCH 5/9] soc: samsung: pm: Add support for suspend-to-ram of Exynos5433 Chanwoo Choi
     [not found]       ` <1515484746-10656-6-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-01-09 12:45         ` Krzysztof Kozlowski
2018-01-11  5:40           ` Chanwoo Choi
     [not found]   ` <CGME20180109075905epcas2p4aa0174854c0796cc7fa75bdf8a273791@epcas2p4.samsung.com>
2018-01-09  7:59     ` [PATCH 6/9] arm64: dts: exynos: Add iRAM device-tree node for Exynos5433 Chanwoo Choi
     [not found]       ` <1515484746-10656-7-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-01-09 12:46         ` Krzysztof Kozlowski
     [not found]   ` <CGME20180109075905epcas2p156b0f057a13fe5ab96753bf77f2bf652@epcas2p1.samsung.com>
2018-01-09  7:59     ` [PATCH 7/9] arm64: dts: exynos: Use power key as a wakeup source on TM2/TM2E board Chanwoo Choi
     [not found]   ` <CGME20180109075906epcas1p15df259f70311dd96fc2c9ff256b2b615@epcas1p1.samsung.com>
     [not found]     ` <1515484746-10656-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-01-09  7:59       ` [PATCH 8/9] arm64: dts: exynos: Add cpu_suspend property of PSCI for exynos5433 Chanwoo Choi
     [not found]   ` <CGME20180109075906epcas1p288212118a5d58bc15d62a2d828772a49@epcas1p2.samsung.com>
2018-01-09  7:59     ` [PATCH 9/9] arm64: dts: exynos: Add cpu topology information for Exynos5433 SoC Chanwoo Choi
2018-01-09 11:56   ` [RFC PATCH 0/9] soc: samsung: Add support of suspend-to-RAM on Exynos5433 Krzysztof Kozlowski
2018-01-10  9:19     ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b639da18-a069-aeb7-ceca-30c79b1c25c8@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=chanwoo@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=jh80.chung@samsung.com \
    --cc=jonghwa3.lee@samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=s.nawrocki@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).