[PATCH v2 0/2] arm64: dts: qcom: ipq8074: add MicroSD node

[PATCH v2 0/2] arm64: dts: qcom: ipq8074: add MicroSD node

[Chukun Pan]

> Changes from v2:
> * arm64: dts: qcom: ipq6018: add LDOA2 regulator
> No Changes:
> * arm64: dts: qcom: ipq8074: add MicroSD node

-- 
2.25.1

[PATCH v2 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator

[Chukun Pan]

Add LDOA2 regulator of MP5496 to support SDCC voltage scaling.

Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 5e1277fea725..2f892d3bbbc6 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -174,6 +174,12 @@ ipq6018_s2: s2 {
 						regulator-max-microvolt = <1062500>;
 						regulator-always-on;
 					};
+
+					ipq6018_l2: l2 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
 				};
 			};
 		};
-- 
2.25.1

Re: [PATCH v2 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator

[Konrad Dybcio]

On 1/10/24 16:10, Chukun Pan wrote:
> Add LDOA2 regulator of MP5496 to support SDCC voltage scaling.
> 
> Suggested-by: Robert Marko <robimarko@gmail.com>
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> ---
>   arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 5e1277fea725..2f892d3bbbc6 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -174,6 +174,12 @@ ipq6018_s2: s2 {
>   						regulator-max-microvolt = <1062500>;
>   						regulator-always-on;
>   					};
> +
> +					ipq6018_l2: l2 {
> +						regulator-min-microvolt = <1800000>;
> +						regulator-max-microvolt = <3300000>;
> +						regulator-always-on;

Why is is always-on?

Konrad

Re: [PATCH v2 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator

[Chukun Pan]

> Why is is always-on?

No need, I will remove it in the next patch.

Thanks,
Chukun

-- 
2.25.1

[PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Chukun Pan]

Enable mmc device found on ipq6018 devices.
This node supports both eMMC and SD cards.

Tested with:
  eMMC (HS200)
  SD Card (SDR50/SDR104)

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 5e1277fea725..39fb38914a1e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -436,6 +436,28 @@ dwc_1: usb@7000000 {
 			};
 		};
 
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x7804000 0x0 0x1000>,
+			      <0x0 0x7805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			max-frequency = <192000000>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+
+			status = "disabled";
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07884000 0x0 0x2b000>;
-- 
2.25.1

Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Krzysztof Kozlowski]

On 10/01/2024 16:10, Chukun Pan wrote:
> Enable mmc device found on ipq6018 devices.
> This node supports both eMMC and SD cards.
> 
> Tested with:
>   eMMC (HS200)
>   SD Card (SDR50/SDR104)

How? It is disabled...

...

> +
> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +				 <&gcc GCC_SDCC1_APPS_CLK>,
> +				 <&xo>;
> +			clock-names = "iface", "core", "xo";
> +			resets = <&gcc GCC_SDCC1_BCR>;
> +			max-frequency = <192000000>;
> +			mmc-ddr-1_8v;
> +			mmc-hs200-1_8v;

Aren't these three properties of the board?

Best regards,
Krzysztof

Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Chukun Pan]

On 10/01/2024 16:10, Chukun Pan wrote:
> Changes from v2:
> * arm64: dts: qcom: ipq6018: add LDOA2 regulator
> No Changes:
> * arm64: dts: qcom: ipq8074: add MicroSD node

I wrote it wrong in cover-letter, it's ipq6018, not ipq8074.
No Changes:
  arm64: dts: qcom: ipq6018: enable sdhci node

On 10/01/2024 16:22, Krzysztof wrote:
> How? It is disabled...

Disable it because not all devices have eMMC or MicroSD connected.
I enabled it on the dts of the device and tested it on my ipq6000.

> Aren't these three properties of the board?

These are just general properties.

Thanks,
Chukun

-- 
2.25.1

Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Krzysztof Kozlowski]

On 11/01/2024 04:10, Chukun Pan wrote:
> Disable it because not all devices have eMMC or MicroSD connected.
> I enabled it on the dts of the device and tested it on my ipq6000.
> 
>> Aren't these three properties of the board?
> 
> These are just general properties.

? What is a general property? I repeat my question - these do not look
SoC specific, but board.

Best regards,
Krzysztof

Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Chukun Pan]

> ? What is a general property? I repeat my question - these do not look
> SoC specific, but board.

Sorry, I understood it wrong. I will remove the 1.8v properties
in the next patch.

Thanks,
Chukun

-- 
2.25.1