* [PATCH] ARM: dts: microchip: at91: align LED node name with bindings
@ 2024-07-01 16:49 Krzysztof Kozlowski
2024-07-02 8:51 ` Alexander Dahl
2024-08-09 6:11 ` claudiu beznea
0 siblings, 2 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-01 16:49 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nicolas Ferre,
Alexandre Belloni, Claudiu Beznea, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../boot/dts/microchip/at91sam9g20ek_2mmc.dts | 4 ++--
.../at91sam9g25-gardena-smart-gateway.dts | 24 +++++++++----------
arch/arm/boot/dts/microchip/at91sam9n12ek.dts | 6 ++---
arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi | 4 ++--
4 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
index 172af6ff4b18..3e5eab57d1a5 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
@@ -40,13 +40,13 @@ pinctrl_board_mmc0_slot0: mmc0_slot0-board {
leds {
compatible = "gpio-leds";
- ds1 {
+ led-ds1 {
label = "ds1";
gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- ds5 {
+ led-ds5 {
label = "ds5";
gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index af70eb8a3a02..e0c1e8df81b1 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -37,71 +37,71 @@ button {
leds {
compatible = "gpio-leds";
- power_blue {
+ led-power-blue {
label = "smartgw:power:blue";
gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- power_green {
+ led-power-green {
label = "smartgw:power:green";
gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- power_red {
+ led-power-red {
label = "smartgw:power:red";
gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_blue {
+ led-radio-blue {
label = "smartgw:radio:blue";
gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_green {
+ led-radio-green {
label = "smartgw:radio:green";
gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_red {
+ led-radio-red {
label = "smartgw:radio:red";
gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_blue {
+ led-internet-blue {
label = "smartgw:internet:blue";
gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_green {
+ led-internet-green {
label = "smartgw:internet:green";
gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_red {
+ led-internet-red {
label = "smartgw:internet:red";
gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- heartbeat {
+ led-heartbeat {
label = "smartgw:heartbeat";
gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- pb18 {
+ led-pb18 {
status = "disabled";
};
- pd21 {
+ led-pd21 {
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
index 4c644d4c6be7..643c3b2ab97e 100644
--- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -207,19 +207,19 @@ bl_reg: backlight_regulator {
leds {
compatible = "gpio-leds";
- d8 {
+ led-d8 {
label = "d8";
gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
- d9 {
+ led-d9 {
label = "d9";
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
- d10 {
+ led-d10 {
label = "d10";
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
index cdd37f67280b..fb3c19bdfcb6 100644
--- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
@@ -120,13 +120,13 @@ rootfs@800000 {
leds {
compatible = "gpio-leds";
- pb18 {
+ led-pb18 {
label = "pb18";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- pd21 {
+ led-pd21 {
label = "pd21";
gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
};
--
2.43.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] ARM: dts: microchip: at91: align LED node name with bindings
2024-07-01 16:49 [PATCH] ARM: dts: microchip: at91: align LED node name with bindings Krzysztof Kozlowski
@ 2024-07-02 8:51 ` Alexander Dahl
2024-07-02 10:31 ` Krzysztof Kozlowski
2024-08-09 6:11 ` claudiu beznea
1 sibling, 1 reply; 4+ messages in thread
From: Alexander Dahl @ 2024-07-02 8:51 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nicolas Ferre,
Alexandre Belloni, Claudiu Beznea, devicetree, linux-arm-kernel,
linux-kernel
Hello Krzysztof,
Am Mon, Jul 01, 2024 at 06:49:52PM +0200 schrieb Krzysztof Kozlowski:
> Bindings expect the LED node names to follow certain pattern, see
> dtbs_check warnings:
>
> at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../boot/dts/microchip/at91sam9g20ek_2mmc.dts | 4 ++--
> .../at91sam9g25-gardena-smart-gateway.dts | 24 +++++++++----------
> arch/arm/boot/dts/microchip/at91sam9n12ek.dts | 6 ++---
> arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi | 4 ++--
> 4 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
> index 172af6ff4b18..3e5eab57d1a5 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
> @@ -40,13 +40,13 @@ pinctrl_board_mmc0_slot0: mmc0_slot0-board {
> leds {
> compatible = "gpio-leds";
>
> - ds1 {
> + led-ds1 {
> label = "ds1";
> gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
>
> - ds5 {
> + led-ds5 {
> label = "ds5";
> gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
> index af70eb8a3a02..e0c1e8df81b1 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
> @@ -37,71 +37,71 @@ button {
> leds {
> compatible = "gpio-leds";
>
> - power_blue {
> + led-power-blue {
> label = "smartgw:power:blue";
> gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - power_green {
> + led-power-green {
> label = "smartgw:power:green";
> gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - power_red {
> + led-power-red {
> label = "smartgw:power:red";
> gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - radio_blue {
> + led-radio-blue {
> label = "smartgw:radio:blue";
> gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - radio_green {
> + led-radio-green {
> label = "smartgw:radio:green";
> gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - radio_red {
> + led-radio-red {
> label = "smartgw:radio:red";
> gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - internet_blue {
> + led-internet-blue {
> label = "smartgw:internet:blue";
> gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - internet_green {
> + led-internet-green {
> label = "smartgw:internet:green";
> gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - internet_red {
> + led-internet-red {
> label = "smartgw:internet:red";
> gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - heartbeat {
> + led-heartbeat {
> label = "smartgw:heartbeat";
> gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
>
> - pb18 {
> + led-pb18 {
> status = "disabled";
> };
>
> - pd21 {
> + led-pd21 {
> status = "disabled";
> };
> };
> diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
> index 4c644d4c6be7..643c3b2ab97e 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
> @@ -207,19 +207,19 @@ bl_reg: backlight_regulator {
> leds {
> compatible = "gpio-leds";
>
> - d8 {
> + led-d8 {
> label = "d8";
> gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "mmc0";
> };
>
> - d9 {
> + led-d9 {
> label = "d9";
> gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "nand-disk";
> };
>
> - d10 {
> + led-d10 {
> label = "d10";
> gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
> index cdd37f67280b..fb3c19bdfcb6 100644
> --- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
> +++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
> @@ -120,13 +120,13 @@ rootfs@800000 {
> leds {
> compatible = "gpio-leds";
>
> - pb18 {
> + led-pb18 {
> label = "pb18";
> gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> };
>
> - pd21 {
> + led-pd21 {
> label = "pd21";
> gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
> };
In this case these are all gpio-leds and the pattern is in the
leds-gpio gpio binding. I'm wondering however why you chose the very
generic 'led' match over the more strict one requiring the names to
look like 'led-0', 'led-1' an so forth? The generic match would also
match names like 'knowledge' or 'controlled'. But besides that:
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Greets
Alex
> --
> 2.43.0
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] ARM: dts: microchip: at91: align LED node name with bindings
2024-07-02 8:51 ` Alexander Dahl
@ 2024-07-02 10:31 ` Krzysztof Kozlowski
0 siblings, 0 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-02 10:31 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nicolas Ferre,
Alexandre Belloni, Claudiu Beznea, devicetree, linux-arm-kernel,
linux-kernel
On 02/07/2024 10:51, Alexander Dahl wrote:
>> diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
>> index cdd37f67280b..fb3c19bdfcb6 100644
>> --- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
>> +++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
>> @@ -120,13 +120,13 @@ rootfs@800000 {
>> leds {
>> compatible = "gpio-leds";
>>
>> - pb18 {
>> + led-pb18 {
>> label = "pb18";
>> gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
>> linux,default-trigger = "heartbeat";
>> };
>>
>> - pd21 {
>> + led-pd21 {
>> label = "pd21";
>> gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
>> };
>
> In this case these are all gpio-leds and the pattern is in the
> leds-gpio gpio binding. I'm wondering however why you chose the very
> generic 'led' match over the more strict one requiring the names to
match? Which match? I did not write the match pattern in the binding, did I?
> look like 'led-0', 'led-1' an so forth? The generic match would also
Works for me too. The easiest was to add led prefix. I am not the
maintainer of this platform, so I am doing just some random cleanups and
prefix is the easiest cleanup.
> match names like 'knowledge' or 'controlled'. But besides that:
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: microchip: at91: align LED node name with bindings
2024-07-01 16:49 [PATCH] ARM: dts: microchip: at91: align LED node name with bindings Krzysztof Kozlowski
2024-07-02 8:51 ` Alexander Dahl
@ 2024-08-09 6:11 ` claudiu beznea
1 sibling, 0 replies; 4+ messages in thread
From: claudiu beznea @ 2024-08-09 6:11 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Nicolas Ferre, Alexandre Belloni, devicetree,
linux-arm-kernel, linux-kernel
On 01.07.2024 19:49, Krzysztof Kozlowski wrote:
> Bindings expect the LED node names to follow certain pattern, see
> dtbs_check warnings:
>
> at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied to at91-dt, thanks!
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-08-09 6:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-07-01 16:49 [PATCH] ARM: dts: microchip: at91: align LED node name with bindings Krzysztof Kozlowski
2024-07-02 8:51 ` Alexander Dahl
2024-07-02 10:31 ` Krzysztof Kozlowski
2024-08-09 6:11 ` claudiu beznea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).