From: "Yunfei Dong (董云飞)" <Yunfei.Dong@mediatek.com>
To: "angelogioacchino.delregno@collabora.com"
<angelogioacchino.delregno@collabora.com>,
"nicolas@ndufresne.ca" <nicolas@ndufresne.ca>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"Tiffany Lin (林慧珊)" <tiffany.lin@mediatek.com>,
"mchehab@kernel.org" <mchehab@kernel.org>,
"Mingjia Zhang (张明佳)" <Mingjia.Zhang@mediatek.com>,
"tfiga@google.com" <tfiga@google.com>,
"benjamin.gaignard@collabora.com"
<benjamin.gaignard@collabora.com>,
"hverkuil-cisco@xs4all.nl" <hverkuil-cisco@xs4all.nl>,
"matthias.bgg@gmail.com" <matthias.bgg@gmail.com>,
"Andrew-CT Chen (陳智迪)" <Andrew-CT.Chen@mediatek.com>,
"acourbot@chromium.org" <acourbot@chromium.org>
Cc: "Xiaoyong Lu (卢小勇)" <Xiaoyong.Lu@mediatek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"frkoenig@chromium.org" <frkoenig@chromium.org>,
"George Sun (孙林)" <George.Sun@mediatek.com>,
"stevecho@chromium.org" <stevecho@chromium.org>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-mediatek@lists.infradead.org"
<linux-mediatek@lists.infradead.org>,
"daniel@ffwll.ch" <daniel@ffwll.ch>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"Irui Wang (王瑞)" <Irui.Wang@mediatek.com>,
"hsinyi@chromium.org" <hsinyi@chromium.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: Re: [PATCH v5] media: mediatek: vcodec: Add to support VP9 inner racing mode
Date: Mon, 7 Nov 2022 11:46:58 +0000 [thread overview]
Message-ID: <b7f6e258d00e9946852b900ada0548e342c1ce50.camel@mediatek.com> (raw)
In-Reply-To: <20221025014659.7158-1-mingjia.zhang@mediatek.com>
Hi Mingjia,
Thanks for your patch.
Some comments need to get your feedback.
On Tue, 2022-10-25 at 09:46 +0800, Mingjia Zhang wrote:
> Enable VP9 inner racing mode
> We send lat trans buffer to the core when trigger lat to work,
> instead of waiting for the lat decode done.
> It can be reduce decoder latency.
>
> Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
> ---
> Changes from v3:
>
> - CTS/GTS test pass
> - Fluster result: Ran 275/303 tests successfully
>
> Changes from v2:
>
> - CTS/GTS test pass
> - Fluster result: Ran 240/303 tests successfully
>
> Changes from v1:
>
> - CTS/GTS test pass
> ---
> .../vcodec/vdec/vdec_vp9_req_lat_if.c | 85 ++++++++++-------
> --
> 1 file changed, 47 insertions(+), 38 deletions(-)
>
> diff --git
> a/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
> b/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
> index 81de876d51267..1b39119c89951 100644
> ---
> a/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
> +++
> b/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
> @@ -436,6 +436,7 @@ struct vdec_vp9_slice_ref {
> * @frame_ctx: 4 frame context according to VP9 Spec
> * @frame_ctx_helper: 4 frame context according to newest
> kernel spec
> * @dirty: state of each frame context
> + * @local_vsi: local instance vsi information
> * @init_vsi: vsi used for initialized VP9 instance
> * @vsi: vsi used for decoding/flush ...
> * @core_vsi: vsi used for Core stage
> @@ -482,6 +483,8 @@ struct vdec_vp9_slice_instance {
> struct v4l2_vp9_frame_context frame_ctx_helper;
> unsigned char dirty[4];
>
> + struct vdec_vp9_slice_vsi local_vsi;
> +
> /* MicroP vsi */
> union {
> struct vdec_vp9_slice_init_vsi *init_vsi;
> @@ -1616,16 +1619,10 @@ static int
> vdec_vp9_slice_update_single(struct vdec_vp9_slice_instance *instance
> }
>
> static int vdec_vp9_slice_update_lat(struct vdec_vp9_slice_instance
> *instance,
> - struct vdec_lat_buf *lat_buf,
> - struct vdec_vp9_slice_pfc *pfc)
> + struct vdec_vp9_slice_vsi *vsi)
> {
> - struct vdec_vp9_slice_vsi *vsi;
> -
> - vsi = &pfc->vsi;
> - memcpy(&pfc->state[0], &vsi->state, sizeof(vsi->state));
> -
> mtk_vcodec_debug(instance, "Frame %u LAT CRC 0x%08x %lx %lx\n",
> - pfc->seq, vsi->state.crc[0],
> + (instance->seq - 1), vsi->state.crc[0],
> (unsigned long)vsi->trans.dma_addr,
> (unsigned long)vsi->trans.dma_addr_end);
>
> @@ -2090,6 +2087,13 @@ static int vdec_vp9_slice_lat_decode(void
> *h_vdec, struct mtk_vcodec_mem *bs,
> return ret;
> }
>
> + if (IS_VDEC_INNER_RACING(ctx->dev->dec_capability)) {
> + vdec_vp9_slice_vsi_from_remote(vsi, instance->vsi, 0);
> + memcpy(&instance->local_vsi, vsi, sizeof(*vsi));
> + vdec_msg_queue_qbuf(&ctx->dev->msg_queue_core_ctx,
> lat_buf);
> + vsi = &instance->local_vsi;
> + }
> +
> if (instance->irq) {
> ret = mtk_vcodec_wait_for_done_ctx(ctx, MTK_INST_IRQ_
> RECEIVED,
> WAIT_INTR_TIMEOUT_MS
> , MTK_VDEC_LAT0);
> @@ -2102,22 +2106,25 @@ static int vdec_vp9_slice_lat_decode(void
> *h_vdec, struct mtk_vcodec_mem *bs,
> }
>
> vdec_vp9_slice_vsi_from_remote(vsi, instance->vsi, 0);
> - ret = vdec_vp9_slice_update_lat(instance, lat_buf, pfc);
> + ret = vdec_vp9_slice_update_lat(instance, vsi);
>
> - /* LAT trans full, no more UBE or decode timeout */
> - if (ret) {
> - mtk_vcodec_err(instance, "VP9 decode error: %d\n",
> ret);
> - return ret;
> - }
> + if (!IS_VDEC_INNER_RACING(ctx->dev->dec_capability))
> + /* LAT trans full, no more UBE or decode timeout */
> + if (ret) {
> + mtk_vcodec_err(instance, "frame[%d] decode
> error: %d\n",
> + ret, (instance->seq - 1));
> + return ret;
> + }
>
If inner racing decode error, how to do? Looks this error condition
only in non inner racing mode.
> - mtk_vcodec_debug(instance, "lat dma addr: 0x%lx 0x%lx\n",
> - (unsigned long)pfc->vsi.trans.dma_addr,
> - (unsigned long)pfc->vsi.trans.dma_addr_end);
>
> - vdec_msg_queue_update_ube_wptr(&ctx->msg_queue,
> - vsi->trans.dma_addr_end +
> - ctx-
> >msg_queue.wdma_addr.dma_addr);
> - vdec_msg_queue_qbuf(&ctx->dev->msg_queue_core_ctx, lat_buf);
> + vsi->trans.dma_addr_end += ctx->msg_queue.wdma_addr.dma_addr;
> + vdec_msg_queue_update_ube_wptr(&ctx->msg_queue, vsi-
> >trans.dma_addr_end);
> + if (!IS_VDEC_INNER_RACING(ctx->dev->dec_capability))
> + vdec_msg_queue_qbuf(&ctx->dev->msg_queue_core_ctx,
> lat_buf);
> +
> + mtk_vcodec_debug(instance, "lat trans end addr(0x%lx), ube
> start addr(0x%lx)\n",
> + (unsigned long)vsi->trans.dma_addr_end,
> + (unsigned long)ctx-
> >msg_queue.wdma_addr.dma_addr);
>
> return 0;
> }
> @@ -2139,40 +2146,40 @@ static int vdec_vp9_slice_decode(void
> *h_vdec, struct mtk_vcodec_mem *bs,
> static int vdec_vp9_slice_core_decode(struct vdec_lat_buf *lat_buf)
> {
> struct vdec_vp9_slice_instance *instance;
> - struct vdec_vp9_slice_pfc *pfc;
> + struct vdec_vp9_slice_pfc *pfc = NULL;
> struct mtk_vcodec_ctx *ctx = NULL;
> struct vdec_fb *fb = NULL;
> int ret = -EINVAL;
>
> if (!lat_buf)
> - goto err;
> + return -EINVAL;
>
> pfc = lat_buf->private_data;
> ctx = lat_buf->ctx;
> if (!pfc || !ctx)
> - goto err;
> + return -EINVAL;
>
> instance = ctx->drv_handle;
> if (!instance)
> - goto err;
> + return -EINVAL;
>
> fb = ctx->dev->vdec_pdata->get_cap_buffer(ctx);
> if (!fb) {
> ret = -EBUSY;
> - goto err;
> + goto vdec_dec_end;
> }
>
> ret = vdec_vp9_slice_setup_core(instance, fb, lat_buf, pfc);
> if (ret) {
> mtk_vcodec_err(instance,
> "vdec_vp9_slice_setup_core\n");
> - goto err;
> + goto vdec_dec_end;
> }
> vdec_vp9_slice_vsi_to_remote(&pfc->vsi, instance->core_vsi);
>
> ret = vpu_dec_core(&instance->vpu);
> if (ret) {
> mtk_vcodec_err(instance, "vpu_dec_core\n");
> - goto err;
> + goto vdec_dec_end;
> }
>
> if (instance->irq) {
> @@ -2190,24 +2197,26 @@ static int vdec_vp9_slice_core_decode(struct
> vdec_lat_buf *lat_buf)
> ret = vdec_vp9_slice_update_core(instance, lat_buf, pfc);
> if (ret) {
> mtk_vcodec_err(instance,
> "vdec_vp9_slice_update_core\n");
> - goto err;
> + goto vdec_dec_end;
> }
>
> - pfc->vsi.trans.dma_addr_end += ctx-
> >msg_queue.wdma_addr.dma_addr;
> mtk_vcodec_debug(instance, "core dma_addr_end 0x%lx\n",
> (unsigned long)pfc->vsi.trans.dma_addr_end);
> - vdec_msg_queue_update_ube_rptr(&ctx->msg_queue, pfc-
> >vsi.trans.dma_addr_end);
> - ctx->dev->vdec_pdata->cap_to_disp(ctx, 0, lat_buf-
> >src_buf_req);
> -
> - return 0;
>
> -err:
> - if (ctx && pfc) {
> - /* always update read pointer */
> - vdec_msg_queue_update_ube_rptr(&ctx->msg_queue, pfc-
> >vsi.trans.dma_addr_end);
> +vdec_dec_end:
> + /* always update read pointer */
> + if (IS_VDEC_INNER_RACING(ctx->dev->dec_capability))
> + vdec_msg_queue_update_ube_rptr(&ctx->msg_queue,
> + pfc-
> >vsi.trans.dma_addr);
> + else
> + vdec_msg_queue_update_ube_rptr(&ctx->msg_queue,
> + pfc-
> >vsi.trans.dma_addr_end);
>
> + if (ret) {
No need {
Best Regards,
Yunfei Dong
> if (fb)
> ctx->dev->vdec_pdata->cap_to_disp(ctx, 1,
> lat_buf->src_buf_req);
> + } else {
> + ctx->dev->vdec_pdata->cap_to_disp(ctx, 0, lat_buf-
> >src_buf_req);
> }
> return ret;
> }
next prev parent reply other threads:[~2022-11-07 11:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-25 1:46 [PATCH v5] media: mediatek: vcodec: Add to support VP9 inner racing mode Mingjia Zhang
2022-11-04 10:19 ` Hans Verkuil
2022-11-07 11:46 ` Yunfei Dong (董云飞) [this message]
2022-11-07 13:18 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7f6e258d00e9946852b900ada0548e342c1ce50.camel@mediatek.com \
--to=yunfei.dong@mediatek.com \
--cc=Andrew-CT.Chen@mediatek.com \
--cc=George.Sun@mediatek.com \
--cc=Irui.Wang@mediatek.com \
--cc=Mingjia.Zhang@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=Xiaoyong.Lu@mediatek.com \
--cc=acourbot@chromium.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=benjamin.gaignard@collabora.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=frkoenig@chromium.org \
--cc=hsinyi@chromium.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=robh+dt@kernel.org \
--cc=stevecho@chromium.org \
--cc=tfiga@google.com \
--cc=tiffany.lin@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).