Re: [PATCH 2/2] arm64: dts: qcom: sa8775p-ride-r3: add new board file

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 6/19/24 20:32, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Revision 3 of the sa8775p-ride board uses a different PHY for the two
> ethernet ports and supports 2.5G speed. Create a new file for the board
> reflecting the changes.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/Makefile            |  1 +
>   arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts | 42 ++++++++++++++++++++
>   2 files changed, 43 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 0c1cebd16649..916fbdbf5631 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride-r3.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
> new file mode 100644
> index 000000000000..d7f0a25c1fc4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include "sa8775p-ride.dtsi"

The board compatible (and name) should probably differ

Konrad