[PATCH] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[PATCH] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Raihan Ahamed]

Lenovo P2 is a handset using the MSM8953 SoC released in 2016

Add a device tree for with initial support for:

- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- WCNSS (WiFi/BT)
- Regulators

Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8953-lenovo-kuntao.dts   | 240 ++++++++++++++++++
 2 files changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e12..aebfb1ae728c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-lenovo-kuntao.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
new file mode 100644
index 000000000000..2fd6345bbe15
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024, Raihan Ahamed <raihan1999ahamed@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Lenovo P2";
+	compatible = "lenovo,kuntao", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <0x125 0x00>;
+	qcom,board-id = <0x41 0x82b1 0x41 0x83b0>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		ramoops@8ee00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x8ee00000 0x0 0x80000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x15000>;
+			record-size = <0x5000>;
+			pmsg-size = <0x2000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wcnss {
+	vddpx-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
-- 
2.43.2

Re: [PATCH] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Krzysztof Kozlowski]

On 26/02/2024 06:55, Raihan Ahamed wrote:
> Lenovo P2 is a handset using the MSM8953 SoC released in 2016
> 
> Add a device tree for with initial support for:
> 
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - WCNSS (WiFi/BT)
> - Regulators
> 
> Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/msm8953-lenovo-kuntao.dts   | 240 ++++++++++++++++++
>  2 files changed, 241 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 39889d5f8e12..aebfb1ae728c 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-lenovo-kuntao.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
> new file mode 100644
> index 000000000000..2fd6345bbe15
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
> @@ -0,0 +1,240 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2024, Raihan Ahamed <raihan1999ahamed@gmail.com>
> + */
> +/dts-v1/;
> +
> +#include "msm8953.dtsi"
> +#include "pm8953.dtsi"
> +#include "pmi8950.dtsi"
> +
> +/delete-node/ &qseecom_mem;
> +
> +/ {
> +	model = "Lenovo P2";
> +	compatible = "lenovo,kuntao", "qcom,msm8953";

Missing bindings.

Best regards,
Krzysztof

[PATCH v2 1/2] dt-bindings: arm: qcom: Add Lenovo P2

[Raihan Ahamed]

Document the compatible for the MSM8953-based Lenovo P2

smartphone released in 2016

Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 1a5fb889a444..6cc19c8d116d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -263,6 +263,7 @@ properties:
 
       - items:
           - enum:
+              - lenovo,kuntao
               - motorola,potter
               - xiaomi,daisy
               - xiaomi,mido
-- 
2.43.2

[PATCH v2 2/2] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Raihan Ahamed]

Lenovo P2 is a handset using the MSM8953 SoC released in 2016

Add a device tree with initial support for:

- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- WCNSS (WiFi/BT)
- Regulators

Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8953-lenovo-kuntao.dts   | 240 ++++++++++++++++++
 2 files changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e12..aebfb1ae728c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-lenovo-kuntao.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
new file mode 100644
index 000000000000..2fd6345bbe15
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024, Raihan Ahamed <raihan1999ahamed@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Lenovo P2";
+	compatible = "lenovo,kuntao", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <0x125 0x00>;
+	qcom,board-id = <0x41 0x82b1 0x41 0x83b0>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		ramoops@8ee00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x8ee00000 0x0 0x80000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x15000>;
+			record-size = <0x5000>;
+			pmsg-size = <0x2000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wcnss {
+	vddpx-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
-- 
2.43.2

Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Add Lenovo P2

[Rob Herring]

On Mon, 26 Feb 2024 15:11:03 +0530, Raihan Ahamed wrote:
> Document the compatible for the MSM8953-based Lenovo P2
> 
> smartphone released in 2016
> 
> Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 


My bot found new DT warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/msm8953-lenovo-kuntao.dtb' for 20240226094256.5736-1-raihan1999ahamed@gmail.com:

arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: gpu@1c00000: clock-names:5: 'anyOf' conditional failed, one must be fixed:
	'core' was expected
	'iface' was expected
	'mem' was expected
	'mem_iface' was expected
	'alt_mem_iface' was expected
	'gfx3d' was expected
	'rbbmtimer' was expected
	'rbcpr' was expected
	from schema $id: http://devicetree.org/schemas/display/msm/gpu.yaml#
arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: iommu@1c48000: compatible: 'oneOf' conditional failed, one must be fixed:
	'qcom,msm8953-iommu' is not one of ['qcom,msm8976-iommu']
	'qcom,msm-iommu-v1' was expected
	from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#

Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Add Lenovo P2

[Krzysztof Kozlowski]

On 26/02/2024 10:41, Raihan Ahamed wrote:
> Document the compatible for the MSM8953-based Lenovo P2
> 
> smartphone released in 2016

It seems you split one sentence over multiple lines. Please join them
and finish with full stop.

Also, this appeared in some odd place. Do not attach (thread) your
patchsets to some other threads (unrelated or older versions). This
buries them deep in the mailbox and might interfere with applying entire
sets.


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


---

This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577

Best regards,
Krzysztof

Re: [PATCH] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Rob Herring]

On Mon, 26 Feb 2024 11:25:56 +0530, Raihan Ahamed wrote:
> Lenovo P2 is a handset using the MSM8953 SoC released in 2016
> 
> Add a device tree for with initial support for:
> 
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - WCNSS (WiFi/BT)
> - Regulators
> 
> Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/msm8953-lenovo-kuntao.dts   | 240 ++++++++++++++++++
>  2 files changed, 241 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
> 


My bot found new DT warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/msm8953-lenovo-kuntao.dtb' for 20240226055615.79195-1-raihan1999ahamed@gmail.com:

arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: gpu@1c00000: clock-names:5: 'anyOf' conditional failed, one must be fixed:
	'core' was expected
	'iface' was expected
	'mem' was expected
	'mem_iface' was expected
	'alt_mem_iface' was expected
	'gfx3d' was expected
	'rbbmtimer' was expected
	'rbcpr' was expected
	from schema $id: http://devicetree.org/schemas/display/msm/gpu.yaml#
arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: iommu@1c48000: compatible: 'oneOf' conditional failed, one must be fixed:
	'qcom,msm8953-iommu' is not one of ['qcom,msm8976-iommu']
	'qcom,msm-iommu-v1' was expected
	from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#

Re: [PATCH] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Raihan Ahamed]

I have checked with latest dtschema before sending version 3, it does
not give anything related to gpu and iommu.

On Mon, Feb 26, 2024 at 10:24 PM Rob Herring <robh@kernel.org> wrote:
>
>
> On Mon, 26 Feb 2024 11:25:56 +0530, Raihan Ahamed wrote:
> > Lenovo P2 is a handset using the MSM8953 SoC released in 2016
> >
> > Add a device tree for with initial support for:
> >
> > - GPIO keys
> > - SDHCI (internal and external storage)
> > - USB Device Mode
> > - WCNSS (WiFi/BT)
> > - Regulators
> >
> > Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
> > ---
> >  arch/arm64/boot/dts/qcom/Makefile             |   1 +
> >  .../boot/dts/qcom/msm8953-lenovo-kuntao.dts   | 240 ++++++++++++++++++
> >  2 files changed, 241 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
> >
>
>
> My bot found new DT warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
>   pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y qcom/msm8953-lenovo-kuntao.dtb' for 20240226055615.79195-1-raihan1999ahamed@gmail.com:
>
> arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: gpu@1c00000: clock-names:5: 'anyOf' conditional failed, one must be fixed:
>         'core' was expected
>         'iface' was expected
>         'mem' was expected
>         'mem_iface' was expected
>         'alt_mem_iface' was expected
>         'gfx3d' was expected
>         'rbbmtimer' was expected
>         'rbcpr' was expected
>         from schema $id: http://devicetree.org/schemas/display/msm/gpu.yaml#
> arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: iommu@1c48000: compatible: 'oneOf' conditional failed, one must be fixed:
>         'qcom,msm8953-iommu' is not one of ['qcom,msm8976-iommu']
>         'qcom,msm-iommu-v1' was expected
>         from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
>
>
>
>
>

Re: [PATCH] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Krzysztof Kozlowski]

On 27/02/2024 05:33, Raihan Ahamed wrote:
> I have checked again with latest dtschema before sending version 3 it
> doesn't give anything related to gpu and iommu

At least the second warning looks real, but the error was already there
- in the DTSI.



Best regards,
Krzysztof

[PATCH v3 1/2] dt-bindings: arm: qcom: Add Lenovo P2

[Raihan Ahamed]

Document the compatible for the MSM8953-based Lenovo P2 smartphone released in 2016.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 1a5fb889a444..6cc19c8d116d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -263,6 +263,7 @@ properties:
 
       - items:
           - enum:
+              - lenovo,kuntao
               - motorola,potter
               - xiaomi,daisy
               - xiaomi,mido
-- 
2.44.0

[PATCH v3 2/2] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Raihan Ahamed]

Lenovo P2 is a handset using the MSM8953 SoC released in 2016

Add a device tree with initial support for:

- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- WCNSS (WiFi/BT)
- Regulators

Acked-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8953-lenovo-kuntao.dts   | 240 ++++++++++++++++++
 2 files changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e12..aebfb1ae728c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-lenovo-kuntao.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
new file mode 100644
index 000000000000..2fd6345bbe15
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024, Raihan Ahamed <raihan1999ahamed@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Lenovo P2";
+	compatible = "lenovo,kuntao", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <0x125 0x00>;
+	qcom,board-id = <0x41 0x82b1 0x41 0x83b0>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		ramoops@8ee00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x8ee00000 0x0 0x80000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x15000>;
+			record-size = <0x5000>;
+			pmsg-size = <0x2000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wcnss {
+	vddpx-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
-- 
2.44.0

Re: [PATCH v3 2/2] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Rob Herring]

On Mon, Feb 26, 2024 at 1:56 PM Raihan Ahamed
<raihan1999ahamed@gmail.com> wrote:
>
> Lenovo P2 is a handset using the MSM8953 SoC released in 2016
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - WCNSS (WiFi/BT)
> - Regulators
>
> Acked-by: Rob Herring <robh+dt@kernel.org>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

We gave no such tag. I'd suggest you go read what these mean.

Rob

Re: [PATCH v3 2/2] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Raihan Ahamed]

Sorry, I misunderstood the fact. Is it necessary to change the tags
only by sending another version?


On Tue, Feb 27, 2024 at 9:25 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Mon, Feb 26, 2024 at 1:56 PM Raihan Ahamed
> <raihan1999ahamed@gmail.com> wrote:
> >
> > Lenovo P2 is a handset using the MSM8953 SoC released in 2016
> >
> > Add a device tree with initial support for:
> >
> > - GPIO keys
> > - SDHCI (internal and external storage)
> > - USB Device Mode
> > - WCNSS (WiFi/BT)
> > - Regulators
> >
> > Acked-by: Rob Herring <robh+dt@kernel.org>
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> We gave no such tag. I'd suggest you go read what these mean.
>
> Rob

Re: [PATCH v3 2/2] arm64: dts: qcom: msm8953-lenovo-kuntao: Add initial device tree

[Krzysztof Kozlowski]

On 26/02/2024 20:54, Raihan Ahamed wrote:
> Lenovo P2 is a handset using the MSM8953 SoC released in 2016
> 
> Add a device tree with initial support for:
> 
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - WCNSS (WiFi/BT)
> - Regulators
> 
> Acked-by: Rob Herring <robh+dt@kernel.org>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

No, these did not happen!

Best regards,
Krzysztof

Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Add Lenovo P2

[Rob Herring]

On Tue, 27 Feb 2024 01:24:41 +0530, Raihan Ahamed wrote:
> Document the compatible for the MSM8953-based Lenovo P2 smartphone released in 2016.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Raihan Ahamed <raihan1999ahamed@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 


My bot found new DT warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/msm8953-lenovo-kuntao.dtb' for 20240226195516.174737-1-raihan1999ahamed@gmail.com:

arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: gpu@1c00000: clock-names:5: 'anyOf' conditional failed, one must be fixed:
	'core' was expected
	'iface' was expected
	'mem' was expected
	'mem_iface' was expected
	'alt_mem_iface' was expected
	'gfx3d' was expected
	'rbbmtimer' was expected
	'rbcpr' was expected
	from schema $id: http://devicetree.org/schemas/display/msm/gpu.yaml#
arch/arm64/boot/dts/qcom/msm8953-lenovo-kuntao.dtb: iommu@1c48000: compatible: 'oneOf' conditional failed, one must be fixed:
	'qcom,msm8953-iommu' is not one of ['qcom,msm8976-iommu']
	'qcom,msm-iommu-v1' was expected
	from schema $id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#